Latest stop log gate repair Tenders | Government stop log gate repair Tenders

CTN :41809673

03 Oct, 2025 22.66 Lacs

Nalbari - Assam

Tender For repairing and renovation works at girls hostel of nalbari polytechnic painting works interior and exterior providing doors frame and doors panel and floor tiles work etc

CTN :41757103

23 Sep, 2025 NA

Junagadh - Gujarat

Tender For (1) sand of good quality with royalty of bhadar and ozat (delivery to site) price of 100 cubic feet rs., (2) galvanized plastic coated sheet (isi) (size-4 8, 4 12, 4 14, 4 15, 4 16 price rs., (3) nut and bolt (8 mm) price rs., (4) cement bag isi mark 53 grade bag price-1 rs. (hathi, ultratrack, sandhi, siddhi), (5) shovel clean, stained, pair number 100 price rs., (6) paver block 60 mm. (delivery to site) price rs., (7) iron from 6 mm to 20 mm. price with tax of 20 kg rs., (8) price per hour of excavation work with jcb and leveling and leveling (with leveling) rs., (9) price per sq. ft. of 1:5:10 and 1:4:8 and 1:2:4 single filling and double filling work rs. (price with vibrator and without vibrator including miller labor), (10) price per sq. ft. of paver block fitting work with concrete and without concrete rs. (11) price per 100 cubic feet of 6 mm, 20 mm, 40 mm reaching the site rs., (12) price per cubic foot and 1 sq. ft. of masonry work rs., (13) price per cubic foot of excavation and demolition with labor rs., (14) price of empty excavation with labour rs. price of 1 cubic foot rs., (15) price of 1 sq. ft. of plaster work rs., (16) price of 1 kg of iron doors with goods and labour rs., (17) price of rcc frame with covers of square and round tanks of underground sewers with goods and labour rs., (18) price of 1 local round for transporting goods with tractor rs. .(19) price of 1 round for delivering the tank and mortar to the site rs., (20) price of 10l15l 20 h.p. sub. motor with pump no. - 1 for pa.p. department rs., (21) price of starter ml-2 and ltlk and mu-1 no. - 1 rs., (2) 180 mm 6 kg ring and 9 round pvc pipe with coupler meter price rs., (23) 2p sharp hp sub motor v-6 pump with no.-1 price rs., (24) l.e.d. fixture complete fitting with no.-1 price rs. (20v, 2p v., 30v. 50v. pipe with isi mark price with gst (price of lipson, syska and gujarat government certified company), (25) 1/18 wire isi mark bundle-1 price rs., (26) 12 to 50 v isi mark power saver lamp led no.-1 price rs., (27) service wire 2.5 and 4 and 6 m.m. isi. price of bundle-1 with mark rs., (28) price of taprol and holder and tester and desmise no.-1 rs., (29) price of pendulum holder no.-1 rs., (30) price of 20 v. and rpv. and 50 v. led choke and pcb with isi mark no.-1 rs., (31) price of 6 mm and 8 mm and 10 mm flat pvc cable 1 meter rs., (32) price of 25 hp and 30 hp suez motor pump set rs., (33) price of 25 hp and 30 hp suez motor panel board rs., (34) price of led lamp (isi company)-15 volt and 20 volt rs., (35) service 4 mm (aluminum) 1 meter price rs., (36) fuse 32 and 64 and 100 1 piece price rs., (37) 50 volt focus 1 piece price rs., (38) runa and kruna and old with collar fitting 1 piece price rs.

CTN :41568088

13 Sep, 2025 NA

Kapurthala - Punjab

Tender For corrigendum : supply of steel almirah , steel almirah small , fully plastic moulded chair with arms seat andback cushioned , executive table or office table , library almirah steel glass front cabinet , laboratoryor libraryorcanteen table , drawing stool , computer table , computer and printer table , steel rack , conference room table , chemistry lab table , foot rest , laboratory table with boxes , lecture stand , laboratory table with drawers , notice board , single seat sofa , three seat sofa , revolving chair big , revolving chair small "steel almirah : size:- height-1981mm, width-916 mm, depth - 486mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0.8 mm, other components the thickness should be 0.9mm and the shelf thickness should be 1.2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a ) /bid number : gem/2025/b/6561795 * /dated: 25-08-2025 & & / bid document 1 / 35 controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. ", "steel almirah small : size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0.8 mm, other components the thickness should be 0.9mm and the shelf thickness should be 1.2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base ", "fully plastic moulded chair with arms (seat &back cushioned) : size - total height : 820mm + 10mm, total width : 565mm + 10mm, total depth : 565mm + 10mm &total weight: 4.20 kg + 50gms cushioned chair with arms comprising of single piece moulded frame made of polypropylene & coated with pu coating paint high gloss finish with seat & back cushion made of moulded pu foam and velvet upholstery. weight of moulded polyproplene frame is 4.2

Central Government/Public Sector

CTN :41596971

23 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & n

Corporations / Associations / Others

CTN :41677267

22 Sep, 2025 NA

Ahmedabad - Gujarat

Tender For supply and installation of cleanroom facility - wall panel, ceiling panel , r-70 aluminium coving. (it includes 135 degree - 3 mtr 12 nos and r-70-26 rmtr) both coving, wall panel accessories to complete the installation of 48 sq mir panel., ceiling panel accessories to complete the installation of 22 sq mtr panel., air handling unit (classified). pre filter post filter.. cooling coil, heater-blower assy with drain pan, fine filter. (hepa filter 0.3 micron down to 99.997% efficiency shall be placed in terminal filter boxes in ceiling panel), recirculation type 10-15% fresh air. 85 to 90% recirculation, non cfc gas (like r-32/r-134 a/r410) cooled condensing unit with suitable accessories. (5.5 tr), refrigeration accessories., refrigerant copper piping with 19 mm thick nitrile rubber insulation on suction line and non-insulated liquid line, trays for copper piping etc. & all other accessories like expansion valve, hand shut off valve, dryer, sight glass etc., terminal filter boxes gel seal type with damper and ss grill and damper operating mechanism suitable for required qty, of air suitable for 610x610mm size filter 1000 efm capacity., hepa filter of h14 grade gel seal type 610 x610 mm, capacity 1000 cfm, terminal filter boxes gel seal damper and ss grill and damper required qty, of air suitable operatit for m size filter,, ira chan suitable, hepa filter of h14 grade gel seal type 450x450 mm., capacity 500 cfm, return air riser of 2.4 mtr to 2.7 mtr height with 10 micron filter, grill and volume control damper etc. suitable for iso class 8 clean room., return air control fire damper, air curtain 3ft width,, sheet metal ducting in 24g complete with tdf flanges, gaskets, nutbolts, stiffeners, supports with rtv sealant of higher gauge as per site requirement., thermal insulation-nitrile rubber 19 mm thk, thermal insulation-nitrile rubber 13 mm thk, fibre cloth & uv paint., dynamic garment cabinet with hepa filter h14 grade, blower assy, pre filter of 10 micron, uv light, fluroscent light, hanger, sliding/swing doors in aluminium/gl powder coating with glass, castor wheel, leveling bolt etc., electrical panel for ahu, condensing unit, heaters etc. with vfd, energy meter, mccb, contactor, relay, mcb, simer, temperature and humidity controller etc., electrical wiring with all accessories from control panel to air handling unit to condensing unit., display and control panel for hvac system., led light fixtures 600 x600 mm 36 watt, reputable company electrical cabling with all accessories for complete wiring of lab. mention design considering 3 to 4 equipment of single phase (upto 15 a) and 2 equipment of 3 phase (upto 15a)., pvc piping for draining the, dustry's re, from, ede, andling unit., cross over bench is ss304 1200 mm width x 500 mm height x 350 mm depth (approximate size), epoxy flooring 2mm thick, color as per choice., clean room compatible single leaf door with vision glass, door closer, hinges, push plate, drop seal, handle etc., m.s. structural support for ducting lines and compressors, vertical wall panel wherever require this includes fasteners, plates etc. as per required sizes., r-100 epoxy coving, color same as epoxy floor, validation & documentation., air quantities measurements, temperature, humidity, positive pressure, particle count and documentation like do, iq, oq & design, drawing etc.

CTN :41332505

08 Sep, 2025 NA

West Kameng - Arunachal Pradesh

Tender For supply of white board , easel stand with whiteboard , study bench and table , table and chair teacher , world map , india map , computer , ups , table and chair , black and white printer , stabilizer , interactive smart panel 75 inch , web camera , speaker , mic system , air fiber with 6 month recharge , chairs plastic , chairs custion , podium , bed , table chair , stool for patient , first aid kit box , height machine , weight machine , iv stand , portable oxygen , flex board , table for staff room , chair for staff room , table and chair computer , cupboards , jaswantgarh painting , color printer , chair custion , computer lab louvre , smart info room computer louvre , library louvre , external building plastic emulsion suraksha , 30 x doors and 60 x windows painting , internal building distemper , books , library racks , table , chair , volleyball set , football set , carom board , ludo , chess , uno , badminton , slide , monkey climb , swing , compartmentalize steel plates , steel glass , steel spoon , water dispenser with hot and cold feature , cat 6 cable , wiring 3 rooms , electrical connection in school building , tubelight , flood light include pole 10 ft , track suit , balclawa , track suit teachers , washing machine , blankets , mattress , cupboards small , cupboards big , pillow , bed sheet with pillow cover , class i to x boards , computer lab boards , library boards , recreational hall boards , staff room boards , principal room boards , mi room boards , school name board , motivational boards , computer lab chart paper , fruit veg animal and color etc chart paper , misc board with glass and frame , curtain , curtain rod , foot mats , school bell , wall clock

Central Government And Public Sector

CTN :41693613

18 Sep, 2025 NA

Multi City - Multi State

Tender For supply of panel filters for hatch doors suitable for high capacity lhb power cars confirming to

Central Government/Public Sector

CTN :41653705

23 Sep, 2025 NA

Ahmedabad - Gujarat

Tender For supply of panel filters for hatch doors suitable f [panel filters for hatch doors suitable for highcapacity power cars for rajdhani / shatabdi express trains confirming to icf drawing no.icf/sk-4-4-095 alt.

corporations/Associations/Others

CTN :41616734

10 Sep, 2025 NA

Faizabad - Uttar Pradesh

Tender For auction sale of empty scrap metallic drums 50 nos,scrap tyre 24 small+ 53 medium + 7 large,scrap woods packing boxes & others woods etc.,scrap woods (packing boxes & others woods etc.,scrap acs (6 split+ 6 window),miscellaneous scrapped items (duct, panel, pipe, rack etc.),miscellaneous scrapped items (duct, panel, pipe, rack, wires etc.),scrap battery (293nos),scrap machine & other spares,used oil filled drum(atf & hydraulic machine oil) capacity 210 ltr.(250nos),scrap plastics items(drums, trays etc.),aluminium scrap (kitchen vassals, cut pieces/ doors etc.),scrap iron machine chips,scrap aluminium machine chips

Stop Log Gate Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations / Associations / Others

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others