Latest straight coupler Tenders | Government straight coupler Tenders

Central Government/Public Sector

CTN :44800478

23 Apr, 2026 NA

Jagadhri - Haryana

Tender For supply of set of gasket for inter vehicular coupler as per rdso spec. no. rdso/pe/spec/ac/ 0177-2013 (rev.0) or latest. each set consists of 03 items as follows : 1) foundation rubber gasket for iv coupling socket assembly. qty. - 01 nos. 2) sealing o ring gasket for jumper plug. qty.- 01 nos. 3) sealing gasket of coupler body and cover for iv coupling socket assembly. qty- 02 nos. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44799432

21 Apr, 2026 NA

Multi City - Maharashtra

Tender For auction sale of rolling stock - condemned bg covered over aged bcn wagons including ferrous and nonferrous material with an actionable weight 201.37 mts (approx.).lot qty: 15 nos. restricted items: 1) ctrb wheel complete set with bearing (4set/wagon), 2) casnub trolleys with bolster and brake beams (4 sets/wagon), 3) coupler body (2nos/wagon), 4) knuckle (02 nos/wagon), 5) draft gear 02nos/wagon), 7)yoke and yoke pin (02 nos/wagon), 8) centre pivot pin (02 nos/wagon), 9) dv (01 o/wagon), 10) sab (01 no/wagon), 12) brake cylinder (01 no/ wagon), 13) centre pivot top base (02 nos/wagon), 14) cbc stopper (02 nos/wagon).

CTN :44802971

18 Apr, 2026 NA

Saharanpur - Uttar Pradesh

Tender For supply of hc8015 left hand guide way hd , hc8017 roll lower with shaft hd , hc8018 sprocket t8 conveyor driving hd , hc80110 sprocket t8 transmission chain hd , hc80112 coupler hd , hc80131 gear minor t19 hd , hc80132 gear t28 hd , hc80134 fork minor hinge hd , hc80136 block hinge slide hd , hc80142 knife dead oblique bed knife hd , hc80143 spring hd , hc80148 chain transmission hd , hc80150 roll wooden with shaft hd , hc80175 shaft universal joint hd , hc80116 body main bearing outer hd , hc80117 body main bearing inner hd , hc80120 pinion t12 hd , hc80121 gear wheel t30 hd , hc80122 bevel pinion fm t14 hd , hc80123 bevel pinion rm t14 hd , hc80124 bevel wheel t35 hd , hc80125 claw clutch hd , hc80137 bearing body trans imp side comp hd , hc80138 bearing body trans clutch side comp hd , hc80173 shaft impeller hd , hc80185 shaft clutch hd , hc80187 shaft bevel gear hd , hc8019 sprocket t8 conveyor driven hd , hc80144 ball bearing of main shaft hd ) /bid number : gem/2026/b/7422550 * /dated: 08-04-2026 & & / bid document 1 / 22

CTN :44787611

17 Apr, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of mechanical spares - conveyor chain , 60w led drivers , 60w led chips , sealing unit servicing , sealing unit hose , solenoid valves , non-veg meals , veg meals , 2 inch sewel joints , 2 inch ss ling o ring , 2 inch male housing o ring , erc cable , dbc face o ring , dbc sewel o ring , dbc valve coupler o ring , erc male body o ring , 425kg actuator , 425kg srv set , 425kg actuator o ring , 425kg qrc o ring , mak4 cuc card display , delta plc display , hydrotesting of loading arms , sply of supervisor for mechanical works , sply of supervisor for welding and fabr work

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :44784941

16 Apr, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap and condemned lhb cbc coupler body of sorts & sizes with or w/o attachment us & ur ,as it is. loc:- lying at bin no. c-117 in scrap yard judw. remarks:- (i)loading by purchaser (ii) private road crane allowed for loading purpose.

Central Government/Public Sector

CTN :44793595

28 Apr, 2026 NA

Perambalur - Tamil Nadu

Tender For corrigendum : supply of aar-h type coupler main body to sanrok make drg no ied-1065 rdso spec no. rdso/2011/cg-03 rev-01) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44773730

13 Apr, 2026 NA

Hubli - Karnataka

Tender For supply of knuckle for c.b.c coupler body assembly for aar h type, as per escorts sk 611 confirming to rdso specification no.rdso/2011/cg-03(rev-3) with amendment slip no. 1 of july 2024 specn: rdso/2011/cg-03/rev-1) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44769536

17 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)cr bcnm1 30019261000 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 2)cr boxnm1 10019600252 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 3)sr boxnm1 10069645319 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 4)sc boxnr 25099760826 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)sc boxnr 25099760284 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 6)sc boxnm1 10099660733 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 7)cr boxnm1 10019860229 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke vn side only, 4.yoke pin, and 5.side bearer top plate = 7 wagons. ds8 no:023310-25-24115 dt: 27.02.2026. pl.no. 98110159, location: jtj yard. custodian: sse - c and w - jtj. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government. (6) wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside.

Straight Coupler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector