Latest straight joint kit Tenders | Government straight joint kit Tenders

CTN :45048074

11 May, 2026 90.00 Lacs

Surat - Gujarat

Tender For tender for annual rate contract work for laying, testing & commissioning of 11/22kv underground xlpe cable(185 sq mm xlpe cable by dgvcl) with cable end termination & straight jointing kits (by contractor) under nd scheme (sr no-10820603) in bardoli rural sub division under bardoli division.

Central Government/Public Sector

CTN :45049924

12 May, 2026 NA

Mumbai - Maharashtra

Tender For supply and end termination of over current protection system with residual current of 30 ma along with full end termination suitable for office wiring along with residual current protection operated on 190-240v v ac supply with load current 32 a confirming to id 12640 (part 2): 2008 iec61009-1: 1996 or latest with copper terminal connector suitable for 2.5 dia aluminium tubular busbar for 32a copper palm 1 copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is:617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 32. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44928494

30 Apr, 2026 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of electrical equipment to be required in operation circles, under chief engineer (op.) kz, dharamshala - 11kv heat shrinkable cable termination kits, suitable for 11kv, 3 core ab cable as per isi specifications and its latest amendments thereof (cpri tested)denson/3-mmake only of following sizes:-denson/3-mmake only, 3 x 400 mm2 (od type), 3 x 400 mm2 (id type), 11kv heat shrinkable cable straight jointing kits, suitable for 11kv, 3 core xlpe as per isi specificationsand its latest amendments thereof (cpri tested)denson/3-m(manhidra) make only of following sizes:-, 3 x 300 mm2

State Government

CTN :44539772

11 May, 2026 NA

Ukai - Gujarat

Tender For corrigendum : supply of various types lighting material for emd-iii-common, colony electrical maint. & electrical fuel section at gsecl ukai tps. (emd-iii (common) et-6227) - industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/415v ac, 63 amp, 4 pole, sens:30ma ,mounting- din rail, mcbs(3 pole+nutral) miniature circuit breker current rating 63amp., ring spanner set model 1812 taparia make, fix spanner size 6x7 mm to 30x32 mm jhalani make, tubular spanner set (8 pcs ) product no ts 08 taparia make, taparia combination plier, product no.1621-8,210 mm, crimping tools, capacity: 6 mm2 to 50 mm2., crimping tools capacity: 10 mm2 to 185 mm2., wooden lighting board with elcb+mcb, 5 pin switch socket, control fuse, flexible cable, industrial top etc as per detail specification, 2 switch + 2 plug wooden board with top sunmica, lighting panel with 18 outgoing c.k.t., supplied with double door, insulated busbar, insulated neutral bars, earth bar, cable ties, circuit identification lables, modular type 16/20 amp 1-way swich,240 volt, 5 / 6 ampere modular switch, 230 volts, 50 hz., switch socket combined 6 & 16 amp.anchor make, 6/16a uni.socket code -4191, 15 / 16 ampere modular socket, 230 volts, 50 hz., plug socket 6 amp 230v,5 hole, led lamp 9 watt, 230v, elmex terminal connector 35 sqmm type cst-35, indication led lamp 25.5 mm dia. 110v ac, 0.5w, red with lvgp, smc junction box : dimension (outside-mm) 730 x 510 x 220, dimension (inside-mm) 700 x 480 x 200, make : sintex, pvc adhesive insulation tape roll, ht tap roll, wolf make air blower, bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, digital multimeter, industrial exhaust fan 1 phase 230 v, size: 305 mm,900 rpm suitable for heavy duty having minimum sound, ring mounted to give maximum volume under free air flow., digital clamp meter, cg make,bracket type wall mounted fan,230volt,ac,50hz,sweep-450mm( 18 inch ),oscillating & tilting type, industrial wall mounted fan 1ph, pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., heavy duty industrial pedestal fan with regulator, 1-phase,230 v ac, sweep: 450 mm, totally metal body., industrial wall mounted fan, sweep-750 mm, voltage - 230 v ac, 3 cx1.5 sqmm flexible copper conductor 1100 v, copper flexible wire 3 cx2.5 sqmm ,1.1 kv, flexible unsheathed pvc insulated copper cable of size 4 corex6 sqmm, 1.1kv,multi stranded anealed tinned copper,epr insulated,extruded pcp sheath flexible cable size 4cx4 sqmm, pvc twin wire 2.5mm sqr., ictpn switch 415 volts,200 amp. t.p. heavy duty., ictp switch 415 volts,100 amp. t.p. heavy duty., led tube light fixture 4 ft long 18/20 watt., mcb single pole 6 amp., elcb+mcb 32 amp,30 ma, 4-pole (3 + n) 240/415 v, 50 hz, miniature circuit breaker 3 - pole, 32 a, 415 v, rccb,240/

CTN :44961942

04 May, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

Central Government/Public Sector

CTN :44932767

25 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply and termination of 20a, 240 v plug and socket with two pin industrial plug with socket confirming to iec 61439-3 suitable for flush mounting and surface mounting with cord end termination suitable for copper cable of conductor size 1.5 sqmm with cord-end termination in shop floor. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt 1) 1993 and is:8623/1993, amended to date also termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 25. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44833862

27 Apr, 2026 83.74 Lacs

Margao - Goa

Tender For supply of outdoor termination kits and straight joint kits of various ratings for 11kv and 33kv underground cable network.

State Government

CTN :44780316

27 Apr, 2026 2.84 Lacs

Raipur - Chhattisgarh

Tender For estimate for replacement of 33 kv ab cable with dog conductor at 33/11 kv swagat vihar s/s. dunda, raipur under city dn. south, raipur. 78-33p-5156-25-0041 dt. 29.12.25. r5633p250867. (33p-161-i)estimate for replacement of 01 no. mid span rsj pole with lt line at shyam nagar telibandha raipur under civil line zone of city dn. east raipur. 78-33p-5145-25-0051 dt. 22.12.25. r4533p250749. (33p-173-i)estimate for replacement of burnt 33 kv underground cable end terminal jointing kit of intakewell feeder at 33/11 kv rawanbhata substation under city dn. west raipur. 78-33p-5146-25-0046 dt. 22.01.26. r4633p250660. (33p-190-i)estimate for replacement of damage 08 span single run 3phase 05 wire lt ab cable at near verma fabrication ashwani nagar and 01 no. damage old age pcc pole at raj rajeshwari mahamaya mandir raipur under lakhenagar zone city dn. west raipur. 78-33p-5146-25-0044 dt. 19.01.26. r4633p250359. (33p-188-i)estimate for providing straight jointing kit for burst 11 kv ab cable at shri ram park dd nagar under dd nagar zone city dn. west raipur. 78-33p-5146-25-0040 dt. 19.01.26. r4633p250326. (33p-184-i)estimate for providing straight jointing kit for burst 11 kv ab cable at dungaji colony dd nagar under dd nagar zone city dn. west raipur. 78-33p-5146-25-0041 dt. 19.01.26. r4633p250327. (33p-185-i)estimate for maintanance/replacement of damage 11 kv conductor & lt line at near kankali math bramhanpara under lakhenagar zone city dn. west raipur. 78-33p-5146-25-0043 dt. 19.01.26. r4633p250353. (33p-187-i)

CTN :44674329

04 Apr, 2026 25.50 Lacs

Valsad - Gujarat

Tender For tender for supply, laying, testing & commissioning of 11kv underground cablexlpe (cable to be supply by dgvcl) with cable end termination and straight joint kit(to be supplied by the contractor / agency) and hdpe green pipe for ht undergroundcable work and erection of ht-lt lines & t/c etc. for work under nd scheme & all otherscheme at within jurisdiction of umargam ind.sub division under vapi ind. division.

CTN :44611308

13 Apr, 2026 1.00 Crore

Surat - Gujarat

Tender For tender for annual rate contract work of laying, testing and commissioning of 11/22 kv underground xlpe cable (11/22kv xlpe cable to be supplied by dgvcl) with 11/22 kv cable end termination & straight joint kits (to be supplied by contractor) under any sub division under sachin division under all scheme.

Straight Joint Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government

State Government