Latest strainer repair Tenders | Government strainer repair Tenders

Central Government/Public Sector

CTN :40995301

21 Jul, 2025 NA

Bilaspur - Chhattisgarh

Tender For 139470 ms hrh strainer protective rings for tmd stage-2 units (4x500 mw) for ntpc talcher kaniha

Central Government / Public Sector

CTN :40957799

18 Jul, 2025 NA

Secunderabad - Telangana

Tender For supply, installation & commissioning of hydraulic job clamping wise for fixing of avm pads to 60kva lhb ac transformers on table (with work table, power pack, panel box & clamping wise with cylinder) with accessories consisting the following items and drawing en closed. 1) work table of size:1900x800x750 with top ms sheet of 8mm thickness 2) clamping wise with cylinder (heavy duty). 3) hydraulic p ower pack of electrical pump operated for hydraulic operation with foot pedal switch with 3hp motor, 5lpm pump, m28 coupling, bell hou se, manifold block, valve 240v, relief valve, suction strainer, breather, oil level indicator, pressure gauge, 70lts reservoir, oil grade syste m-68, electrical control panel with electrical safety for men working and equipment. [ warranty period: 30 months after the date of deliver y ]

State Government

CTN :40950747

18 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25 mm dia , sitc

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

Corporations And Associations And Others

CTN :40937103

11 Jul, 2025 9.46 Lacs

Ghazipur - Uttar Pradesh

Tender For :provision of water facility at slf bhalswa - boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. all type of soil (350 mm dia), boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in is: 2800 (part i), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level. rocky strata including boulders-350mm, gravel packing in tubewell construction in accordance with is:4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of engineer-in-charge., development of tube well with suitable capacity of air compressor i/c lowering of the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as reqd. the development shall be considered complete when gravel stop sinking, discharge ceased to improve and the sand contents are not more than 10 ppm after 20 minutes of starting the pump complete as reqd., providing, lowering and fixing/placing in vertical position ms black casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required.(a) 200 mm dia. (nominal bore), providing, lowering and fixing/placing in vertical position ms slotted casing medium ( b-class) pipe of following size conforming to is 1239/3589 part-i (2004) at all depth, both ends threaded as required. (b) 150 mm dia (nominal bore), providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell. (a) 200 mm dia., supply, lowering and fixing following size of g.i. pipe (m-class) i/c cutting threading on both sides etc. isi marked etc as reqd. (d). 50mm(nominal bore), s & f following size of g.i. elbow. as reqd. (d). 50mm, s & f ms clamp made up of iron flat of size 50x6 mm with 4 nut bolt for holding the gi pipe as reqd. (b) 50 mm., providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) : 50 mm nominal bore, supplying, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc. as reqd. (e) three phase 7.5 hp having discharge of 480 lpm approx. at 48 m head., s&f following size of g.i.socket as required. 50mm, s&f following size of g.i.union as required. 50mm, p&f following sizes of pvc insulated & pvc sheathed copper conductor 3 core submersible cable confirming to is.694/1990 etc. as reqd. (b) 3x 4 sq.mm., supply of cubical type control panel board for three phase star delta starter, three position selection with auto switch for submersible pumping set of following rating complete with single phasing preventer in auto, contactor (25amp), 0/l relay tp, mcb, voltmeter, ammeter, vss and indication lamp etc. including lamp etc. including connection etc. as required. (a) 10 h.p. rating submersible pump set over load relay (range13-21 amp) & contactor (range 25 amp)., supplying and fixing following sizes of steel flexible safety rope for holding s

State Government

CTN :40923968

18 Jul, 2025 96.88 Lacs

Hooghly - West Bengal

Tender For manufacturing, fabricating fitting-fixing of ms strainer at all the sides of the intake jetty pump house to arrest the foreign materials in the river hooghly of surface water based water supply scheme for bally-jagacha under howrah division, p.h.e.

State Government

CTN :40872605

11 Jul, 2025 73.78 Lacs

Raichur - Karnataka

Tender For overhauling & emergency works of turbine bearnings ,valves ,ms/hrh strainer & thermal insulation.

CTN :40870231

18 Jul, 2025 NA

Parganas - West Bengal

Tender For tender for supply of hex screw , bolt , clip(fig no- 4211) , o ring (ctlg fig-64) , o ring(fig-20) , o ring , nut , o ring , gasket , washer spring , plug (fig-2110) , washer cylinder head(ms sl-02) , o ring , coller(fig-2025) , washer , hex nut , pin , washer spring , ring snap , o ring (ms sl-251) , o-ring , rotor , ojde spanner 18x21 mm , knob(ctlg fig-2075) , spnr 8x9 (odje) , bushing , combination pliers 200mm , hammer , plug , bolt , key , woodruff , stopper , dust indicator(fig-1410) , bolt cross pin(fig-2085) , hose , wire harness , seal oil , interlock shaft(fig-24&2135) , lock , tube , lever , hose(fig 4130) , clamp , adjustable spnr (10-25mm) , cross head , connector , inlet , valve , evacuator(fig-1410 oblique 11) , gasket , 10 mm socket(sl no-g15313) , o ring , insert valve seat(n495c) , lamp indicator eop , oil seal , seal rectangular ring , spnr ojde 10 x 12mm , bolt , connecting rod , element super to by pass filter (ms sl-69) , delivery valve assy , rod , t-handle universal type 1 by 2 inch (300mm) , water temp gauge , key switch (ctlg fig-07 & 1060) , ojde spanner 36x41 mm(sl no-g15313) , tag (ms sl-189) , net(fig-49) , o ring(fig-21 by 30) , 13 mm socket(eqpt sl no g15313) , techo hour meter(fig-1055) , band , bonnet , plug (fig no 3025) , seal oil , plug , hydro meter , gasket , switch(fig-6211 , sl no-11) , socket wrench 17mm , socket wrench 29mm by 30mm , 19 mm socket(sl no-g15313) , gasket gear cover , hour meter cable(ispl fig-15a) , nipple (fig no-102) , bushing , gasket , sealing ring for 4 (mico) , 32 mm socket(sl no-g15313) , housing , rocker , brg needle , socket wrench 19mm , lampassy , cap(fig-1410 by 27) , shaft , element fuel filter , cup , adjustable wrench 200mm , gasket cylinder head(n743) , bolt , tube assy , gasket , cover , tube fuel supply , fork gear shift 5th , bearing , hose(fig-66) , nipple , nut rod (ms sl-06) , bushing front idler , magnet , cover , band brake , o ring , tube , fan belt(ms sl-62) , cover , governor , screen , hose , service kit , positive connector , kit wire harness (os sl no-1567) , element outer , lever gear shift(ctlg fig-2075) , field coil , bearing assy , tube , clutch plate , tube (os sl no-639) , holder , blade cont lever a (fig-6075) , bearing , ball , exhust pipe , push rod , cover , rod , rod , bracket , tube , injection no 6 , plate , cover strainer , tube , cap (fig no 7006) , bracket , plug(fig-39) , gear guide (5m) , filter assy , lever , 12.7 mm nominal size sq drive socket(sl no-g15313) , bracket , feed pump assy , centrifugal oil filter assy , gear driven 4th , lever (fig-6015) , universal joint 75 mm(sl no-g15313) , hose , gear guide , pin cotter , nut , bracket , arm , pump housing(os sl no-542) , bearing end plate , overflow valve , field coil assy , valve assy , support , cover , water outlet (os sl no-651) , housing , hub , pulley , light , rotary switch , intermediate bearing , bracket , seat operator , quick drop valve lh (fig-6096) , gear driven 1st , housing thermostat (bd80eng fig no 1710) , guard inner lh , valve prassure , case , board floor , dfrive assy , cage bearing lh , bracket rh , pump assy , cylinder block gasket kit (60 items ) fig no k2 , bracket , armatureassembly(lucus) , flange brake drum (fig no 3005) , manifold , exhaust , middle , manifold exhaust front , bracket assy lh , cylinder head gasket kit , armature assy (ms sl-599) , heater , air , mc pump assy(ctlg fig-17) , tube cylinder , tool box , hydraulic tank assy(fig-6015) , pump fuel (ptg mvs) , turbo charger assy(tel) , shaft bevel gear , tank assembly(fuel tank)(ctlg fig-1025) , camshaft , frame rh (p-255)

CTN :40877694

12 Jul, 2025 NA

Goindwal - Punjab

Tender For procurement of ms steam strainer asly. and hrh steam strainer asly. for 270mw bhel make turbine.

CTN :40615237

14 Jul, 2025 4.28 Crore

Nashik - Maharashtra

Tender For corrigendum : supply, installation and commissioning of kitchen equipment at kambalgaon - weighing scale ms platform weighing scale.electronic weighing scales of standard make to weigh upto 200 kg. the certificate from weights & measures dept. is to be attached with the machine, duly certifying the serial no. complete with accessories., sack pallete -having dynamic load carrying capacity of 1000 kg, s.s. rack - 5 shelves 3 side up and front side down material specification and construction standards as per ckd tender docket attached, platform trolley - 500 kg load bearing capacity the entire trolley is made of 16 swg. s.s. sheet on m.s. angle frame work, duly rust proof painted on heavy duty castor wheels of reputed make. the top to be stud wielded with the frame for stronger grip. also fitted with a push cart type handle & rubber cushion in front to avoid the damage during movement., platform trolley - 300 kg load bearing capacity. the entire trolley is made of 16 swg. s.s. sheet on m.s. angle frame work, duly rust proof painted on heavy duty castor wheels of reputed make. the top to be stud wielded with the frame for stronger grip. also fitted with a push cart type handle & rubber cushion in front to avoid the damage during movement., s.s. round bin with lid, s.s. square bin with lid, bain marie for sample food material specification and construction standards as per ckd tender docket attached, double jacketed steam cooker/kettle-heat source 600 ltr. capacity double jacketed steam cooker/kettle-heat source-direct injection boiler steam 3 bar @130 c,all ss 304 industrial grade single jackted open boiling steam cooker manufactured from food gradess 304 stainless steel 1.2 mm thickness of cover and conical bottom with 4mm thk ss 304 sheet completely tig welded.cooker will be tiltable by manual operated heavy duty gear box with ss 304 handwheel.accessories steam inlet rotary multipoint, unoin, starch drain valve.strainer ss 304 removable strainer steam inlet 25mm drain valve 50nb product outlet valve, cooker lid heavy duty lid with flip folding with rectangular ss tubes 2mm thk,built in stainer,, rice washer - 50 kg rice per cycle - of 5 - 7 minutes rice washer- model of rice washer. which by mere water pressure the rice is circulated from the wash tank to the cleaning head for a thorough wash.continous process of this function ensures that the product get cleaned well.cleaned rice is colected in perfocrated container and excess water is drained out., food collection trolley material specification and construction standards as per ckd tender docket attached, food transfer trolley material specification and construction standards as per ckd tender docket attached, food collection trolley material specification and construction standards as per ckd tender docket attached, food transfer trolley material specification and construction standards as per ckd tender docket attached, masala trolley material specification and construction standards as per ckd tender docket attached, ss single burner gas range top of 16 swg. s.s-304 sheet on m.s angle frame work duly rust proof painted on ss tubular/ square legs with adjustable nylon bullet feet for uneven floors. fitted with united/standard make heavy duty burner with pilot lamps with individual control valves and heavy duty cast iron pan support complete with accessories., gas operated-cook - woks 500 ltrs ss stove with auto ignite & sus 304 single layer bowl,lid & mixing arm with ss planetary head assembly, teflon mixing pads. concelead burner and variable speed, gas operated-cook - woks 400 ltrs ss stove with auto ignite & sus 304 single layer bowl,lid & mixing arm with ss planetary head assembly, teflon mixing pads. concelead burner and variable speed, single jacketed seam cooler 500 ltrs, tray stacking trolleymaterial specification and construction standards as per ckd tender docket attached, sev making machine, ss big kadai, ss big pateli, gas operated-co

Strainer Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

State Government

State Government

Corporations And Associations And Others

State Government

State Government