Street Light Luminaire Tenders

Get complete information related to latest Street Light Luminaire Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Street Light Luminaire Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Street Light Luminaire Tenders .

Filter

Loading....

Get Tender in Email

corporations/Associations/Others

CTN :43256244

09 Jan, 2026 4.17 Crore

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of nondimmable 190 w constantcurrent led drivers suitable for replacement in existing outdoor led street-light luminaires of make orient, crompton and philips,, nondimmable 140 w constantcurrent led drivers suitable for replacement in existing outdoor led street-light luminaires of make orient, crompton and philips,, nondimmable 110 w constantcurrent led drivers suitable for replacement in existing outdoor led street-light luminaires of make orient, crompton and philips,, nondimmable 70 w constantcurrent led drivers suitable for replacement in existing outdoor led street-light luminaires of make orient, crompton and philips,, nondimmable 36 w constantcurrent led drivers suitable for replacement in existing outdoor led street-light luminaires of make orient, crompton outdoor) rated power: 36 w ±5% 6 and philips,, nondimmable 18 w constantcurrent led drivers suitable for replacement in existing outdoor led street-light luminaires of make orient, crompton and philips, street light luminaire of 24 w led with adjustable type brackets to fit on pole sizes of 25 mm dia to 50 mm dia for providing on existing poles, street light luminaire of 36 w led with adjustable type brackets to fit on pole sizes of 25 mm dia to 50 mm dia for providing on existing poles, street light luminaire of 70 w led with adjustable type brackets to fit on pole sizes of 25 mm dia to 50 mm dia for providing on existing poles, 100w led solar allin-one street light

CTN :43257853

16 Jan, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of curve , space heater with thermostat , led 11w with door switch phillips , power switch with socket 5 15a 240 vac , earth bus bar 25x6 mm al , fan 4 , louvers 6 ip 55 suitabe , single front fixed type non compartmentalised ip 65 with canopyr size 1890 h x 1600 w x 450 d mm with 15mm antivibration pad and 75 mm base frame , mccb 1no 1nc auxiliary contact , ammeter 96sqmm accuracy cl 1 0 scle 90d with zero adjustable facility , shunt 125 a 75mv , power contactor coil voltage 220v dc with 2no 2nc auxiliary contact for 42 with ac3 duty , thermal overload relay tr2d40353 23 32 a , starting resistance punched stainless steel grid type 2 858 ohm 0 630 ohm 220 v dc , field trimmer resitance variable type non spring type 150 ohm 1 0 a , indicating light cluster led type red green white 22 5 mm 220 v dc , auxiliary contactor 220v dc tca3 dn22md 2 no 2 nc , flush mounted stay put type test push button with 1no 1nc element green colour rcb2 220 v dc , flush mounted spring return type test pb black shrouded 1no 1nc rcb2 ba3 220 v dc , pneumatic type on delay timer 1no 1nc operating voltage 220v dc base mounting ta2 dt2 0 1 30 sec , control terminal suitable for 2 5 sqmm wire 2 5 sqmm , power terminals stud type suitable for 355q mm cable for incoming 2550 mm cable for armature 2 550 mm cable for field dpbb 50 150a kbt 100 100 a katm3c 24 a , 16a 220v dc 4pole 2way selector switch flush mounted , thermostate 30 to 110 , push button projecting type 240v ac , space heater 60 w 240v ac , diode 220v dc , indicator aux supply 85 253vdc input 0 75mv out put 4 20ma with 1no contact , limit switch of the door with 1no 1nc contact 240v ac 6amps , red pilot light 220vdc 22 5mm , green pilot light 220vdc 22 5mm , white pilot light 220vdc 22 5mm , auxiliary relay 220v dc 3no 2nc , time relay 0 1 to 30sec 1n0 1nc on delay , auxiliary relay 220v dc 2no 2nc , latched control relay 220v dc 2n0 2nc , mechanical block anchoring 220 230v ac dc , auxiliary relay 230v ac 2no 2nc , plug in relays 24v dc 4c o contacts , relay base , power contactor 160a dc3 duty 3pole 220v dc coil , auxilary contact block 1no 1nc , power contactor 150a 2pole normally closed 220v dc coil auxilary contact block 2no 2nc , fluorescent light cabnet 220v dc ac 50hz 11w , socket 2p t 16a maxi , blue push button with 1no contact , residual current circuit breaker 25a 30ma 2p rccb , fuse support 20a maxi , fuse link 2a , switch fuse unit 3pole 200a with fuse link 160a lockable type , auxiliary 2c o contact , cooling fan 230v ac 6 , plug in relay 220v dc 2c o contacts , moulded case circuit breaker 160a 3 pole , miniature circuit breaker 2x1 6a dc rating , auxiliary contact 2c o contact , miniature circuit breaker 2x2a dc rating , miniature circuit breaker 2x1a ac rating , miniature circuit breaker 2x2a ac rating , shunt 0 200a 0 75mv , thermostat 30 85 c 1nc , thermostat 30 85 c 1no , earth bus bar 25x6mm , indicator aux supply 85 253v dc ac input 0 75mv out put 4 20ma with 2no contact , auxiliary 1no contact , auxiliary contact 1c o contact , auxiliary contact 1no 1nc contact , earth bus bar 25x6mm for chiller , on delay timer , ipr relay , mcb 2 pole , ct with ammeter , r phase ammeter , y phase ammeter , b phase ammeter , emergency push button epb , energy storage knob mccb ,400a ,4p,tmd based release with rotary handle, aux. contact, dc contactor 300a ,1p normally open type,with 2no+2nc , dc contactor //bid details 2 / 123

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

Central Government/Public Sector

CTN :42606016

29 Dec, 2025 NA

Goa - Goa

Tender For corrigendum : supply of magnetic compass - ta sl no 4 1 1 1 transmitting type magnetic compass with electrical transmission , ta sl no 4 1 1 2 magnetic compass binnacle , ta sl no 4 1 1 3 rim ring with two bearings mounted , ta sl no 4 1 1 4 hood without aperture with handles , ta sl no 4 1 1 5 main electric light with suitable cable type of 3 1 5 sq , ta sl no 4 1 1 6 emergency electric light with suitable cable type of 3 1 5 sq , ta sl no 4 1 1 7 junction box with 5 pole terminal strip for compass light , ta sl no 4 1 1 8 fastening material comprising of 4 bolts of brass m16 4 washers and 4 nuts with flange , ta sl no 4 1 1 9 1 lenses and mounting individually adjusted to an optimum value according to the length of thr reflection tube , ta sl no 4 1 1 9 2 reflection tube 140mm dia with flange one gasket , ta sl no 4 1 1 9 3 removable flange to seal the hole in the deck or ceiling from below , ta sl no 4 1 1 9 4 locking device for the telesc opic mirror head wheel house unit , ta sl no 4 1 1 9 5 wheelhouse unit with day and night mirror , ta sl no 4 1 1 10 six bar magnets 200 mm long 10 mm dia for b c correction , ta sl no 4 1 1 11 two full size d spheres of soft iron with marking fastening bolts m16 with washers and nuts of brass , ta sl no 4 1 1 12 one heeling magnet in tube with marked chain active length 175 mm one magnet 125mm one magnet 50 mrn long , ta sl no 4 1 1 13 reflector compass with compass card dia 180 mm with directional system , ta sl no 4 1 1 14 standard azimuth device with vanes and black hinged mirror , ta sl no 4 1 1 15 1 brackets of coated brass with fastening bolts nuts and washers , ta sl no 4 1 1 15 2 flinders tube brass , ta sl no 4 1 1 15 3 plastic cover for flinders tube , ta sl no 4 1 1 15 4 soft iron core 305 mm length , ta sl no 4 1 1 15 5 soft iron core 152 mm length , ta sl no 4 1 1 15 6 soft iron core 76 mm length , ta sl no 4 1 1 15 7 soft iron core 38 mm length , ta sl no 4 1 1 15 8 wooden core 280mm length , ta sl no 4 1 1 15 9 wooden core 140mm length , ta sl no 4 1 1 15 10 wooden core 70mm length , ta sl no 4 1 1 15 11 wooden core 35mm length , ta sl no 4 1 1 16 magnetic compass repeaters , ta sl no 4 1 1 17 junction box converter box other accessories including cables required for interfacing with ships degaussing system , ta sl no 4 1 1 18 nmea booster splitter convertors for transmission of heading information , ta sl no 4 1 1 19 interconnecting cables , ta sl no 4 1 1 20 interface resistor box attenuator for interfacing with rs degaussing system , ta sl no 4 1 1 21 proving of the interface between rs degaussing system and magnetic compass during hats and sats , ta sl no 4 1 6 on board spares , ta sl no 4 1 3 and 5 14 services of engineers and training , ta sl no 4 1 4 and 5 13 12 drawings and documentation

corporations/Associations/Others

CTN :43066646

26 Dec, 2025 1.22 Crore

Mughalsarai - Uttar Pradesh

Tender For supply of pway maintenance tools c c -versine measurement kit , 6 kg abc fire extinguisher , mechanical track jack 15t capacity , rake ballast with long handle , electronic toe load measuring device , electric arc welding machine , steel sections cutting equipment , rail drilling machine , chamfering kit , thermit welding tool set , rail profile weld grinder , rail trimmer power pack for at welding , rail heating blower for at weld , insulated rail dolly , dip lorrey , tent , chair , umbrella , plate screw tubular spanner , fire bucket with stand , p way measuring kit , track gauge cum level , abrassive rail disc cutter machine , weld measuring straight edge , fish plate nut bolt spanner , g i steel bucket , wire brush , adjustable spanner , telescopic self supporting ledder , crow bar , clip applicator , chiesel , gas cutting equipments machine with spare gas cylender , portable dc welding generator , gang hooter , pipe wrench , chain saw , mono rail basket , filler gauge , emergency inflatable lightning equipment , laser distance mete , rail roller , wire basket , jim crow , ballast profile template , prc sleepers lifting chain , destressing roller , tommy bar , box spanner , beater steel with handle , chain 10 meter long with both side with s hook , measuring tape 5 mtr , safety goggles transparant polycarbonated , safety jacket , handle for 2kg hammer , handle for 3kg hammer , handle for 5kg hammer , wooden handle for ballast rake , safety shoes , h s flag red with pvc handle , h s flag green with pvc handle , banner flag red with pvc handle , rain coat , water proof keyman shoulder bag heavy , tri color led torch , torch with rechargeble patrol man torch , wooden block , drill twist , first aid box , industrial safety hand gloves , steel whistle , dragon torch , safety cross belt with reflective tape , retro reflective tape 45m long , cotton canvass tarpoline , sipper water bottle , grease graphite , small testing hammer , inspection cum chipping hammer , elcometer , pocket steel tape , straight edge , metallic tape , logll line with 20kg lead ball , probing rod , calliper inside and outside , feeler gauge , mirror 10x15 cm , torch light , magnifying glass 100cm , piano wire with clamps , plumb bob , steel scrapper , leaser thermometer , spirit level , binoculars , current meter , echo sounder , schmidts hammer , dye penetration kit , magnetic crack detector , welding gauge , duro meter , auto level , hydraulic torque wrench , erc mk v ro rdso drg no t 5919 , metal liner t 8254 , metal liner t 8255

Loading, Please wait...

Street Light Luminaire Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others