Strip Master Tenders

Get complete information related to latest Strip Master Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Strip Master Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Strip Master Tenders .

Filter

Loading....

Get Tender in Email

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Central Government And Public Sector

CTN :45024341

19 May, 2026 8.52 Lacs

Chamba - Himachal Pradesh

Tender For supply of general electrical and mechanical consumables items and loose tools d d - 96 sq mm ammeter0-100a , ac ammeter 030a , ammeter 0 -250a analog , amp meter 0-50 amp , blanket , cotton hand gloves , crocodile clip , crow bar , d spanner set 6x7- 8x9- 10x11- 12x13- 14x15- 16x17- 18x19- 20x22- 21x23- 24x27- 25x28- 30x32 , decorative rope light , dee shackle 3.2ton , digital vernier calliper 300 mm , drill bit set 1mm to 13mm , d-shackle 10 ton , d-shackle 2mt capacity , d- shackle 5mt , electronic component cleaner co2 500 ml aerosol can , fan regulator module base , gas cutting torch, cuttozen-5 , grease gun 10 kg , grinding wheel bosch 4 inch , hand saw , insulation matt for electrical purpose 1000mm width , led indication lamp 110v , led indication lamp 24v ac-dc , led street light 110w , long travel limit switch , mcb 20amp single pole , mcb 63a single pole , mcb single pole 10a, 240v ac, single pole, c-curve , mcb sp c curve 32 amp , mccb 400a 3 pole , mccb 400a 3 pole 415v breaking capacity 50ka with adjust. thermal o-c and magnetic s-c release , nylon rope 20mm dia in meter , nylon rope 25mm dia in meter , nylon rope 8 mm in meter , nylon slings 10 ton capacity 10 mtr lenth with both side loop , nylon slings 10 ton capacity 5 mtr lenth with both side loop , nylon slings 5 ton capacity 10 mtr length with both side loop , nylon slings 5 ton capacity 5 mtr length with both side loop , nylone rope-10mm in meter , optical fiber cable ofc-6 core , panal voltmeter size 72mmx72mm range 0 to 500v , pvc insulated flexible copper cable 1.5 sq.mm 3 core , pvc insulated flexible copper sheated cable 2 core x 2.5 sq mm , pvc insulated unarmoured two core 1.0 sq mm flexible copper cable , ring spanner set 6x7mm,8x9mm,10x11mm,12x13mm,14x15mm,16x17mm,18 x19mm,20x22mm , screw driver set , slide wrench 12 , socket 16amp 6 pin piano type , steel knife blade , steel weld putty , steel wire rope sling with both end loop- 12mm dia. x 03 mtrs length , steel wire rope sling with both end loop- 16mm dia. x 02 mtrs length , steel wire rope sling with both end loop- 16mm dia. x 04 mtrs length , strip type space heater, 60w, 240v , switch 16 amp,piano type , switch 5a-6a , telephone cable , telephone set , timer for street light , voltmeter square type 0 - 500 v , welder s jacket leather , welding goggles black , welding hand gloves leather , welding lead copper 70 sq.mm , wire rope fluid -lubricant //bid details 2 / 56

Central Government And Public Sector

CTN :44760622

08 May, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For corrigendum : installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

Loading, Please wait...

Strip Master Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government And Public Sector