Web Analytics Made Easy - StatCounter

Structural Channel Tenders

Get complete information related to latest Structural Channel Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Structural Channel Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Structural Channel Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :45484258 Due date: 19 Jun, 202619 Jun, 2026 NA
Tender For supply of dome camera night vision 3mp , 64gb memory card , installation testing , 4mp ip bullet camera with dual light and audio , 16 channel nvr cp plus , camera installation , 5x5pvc box , rj45 with crimping , 4u rack for nvr poe switch , 8 plus 2 port poe switch , 4tb surveillance hard disk 3y warranty , nvr harddisk poe switch installation , wallmount bracket 43inch tv , 43inch tv plus wall bracket installation , rack fitting , cat 6 cable 23awg with open cable lying , hdmi cable 4k 3meter

CTN :45176246 Due date: 12 Jun, 202612 Jun, 2026 NA
Tender For bid to ras supply of teensy 4.1 micb3 c40 , mems microphones sph0655lm4h- 1 , raspberry pi 5 8 gb ram , lora sx 1276 and 1278 module , nuts, bolts and l angle different varieties , connecting wires and cables varieties , gps modules with pps output , power bank 10000ma 5v dc , enclosures for teensy, lora, microphone assemblies , micro sd cards 32 gb, class 10 , regulated power supply 12v dc to dc , tripods for sensor nodes , cable and connectors , nema 17 59 n-cm stepper motors bipolar , tmc2208 stepper motor drivers , mini protoboard with screw terminals , 100 uf capacitor 35v , 22 awg wire , 5v regulator , 8.4 inch 4 wire resistive touch panel , 30 v bench power supply , 1 inch steel bearing ball , 22 mm long m3 tie rod , m3 x 6 mm threaded inserts , m3 x 5 mm standoffs , m3 x 5 mm screws , m3 x 8 mm screws , m3 x 10 mm screws , m3 x 35 mm screws , m3 nylon locknuts , m4 x 20 mm screws , m4 x 25 mm screws , m4 nylon locknuts , pla filament , exacto knife , hot glue gun , primary dual payload release actuator , retrofitting carbon fiber cf structural tube , aerodynamic dummy bomblet , electronic trigger interface and wiring harnes , mounting bracket and fastener kit , primary dropping mechanism unit , retrofitting assembly straps , aerodynamic bomblet , 550 mah li hv battery pack , dual channel li hv charger , primary mmhg payload release actuator , retrofitting base plate assembly , dummy mmhg practice bomblet , electronic trigger interface , mounting hardware and vibration dampeners ) /bid number : gem/2026/b/7476437 * /dated: 13-05-2026 & & / bid document 1 / 39

CTN :45507508 Due date: 25 Jun, 202625 Jun, 2026 13.71 Lacs
Tender For supply of excavation, levelling and dressing of earth , fixing of all accessories and materials of single rail pole , erection of 11 kv isolator set , fabrication and commissioning of 11 kv isolator set , earthing of poles and transformer , construction of new transformer plinth , supply and fixing of stay wire and stay rod set , end termination of cable jointing , fabrication and erection of guarding wire , laying of xlpe power cable , supply and fixing of g.i. pipe , laying ,drawing sagging jumpering testing and commissioning of line , supply of ms channel , supply of 11 kv disc insulator , supply of 11 kv pin insulator , supply of 3 pole, 11 kv 400 amp isolator set , supply of structure for above set , supply of structure for pin and post insulator set , supply of pg clamps , supply of earthing rod , supply of end termination jionting , supply of 11 kv fuse set , supply of earth wire and gaurding wire , supply of gaurding channel , supply of f bracket for 33 kv , supply of 33kv v type cross arm , supply of 33 kv pin insulator , supply of 33kv disc fitting , supply of acsr dog conductor of 32 amp mcb , supply of danger board , supply of number plate , supply of barbed wire g.i. , supply of al. binding wire 6 swg , supply of stone pad , supply of belting angle

CTN :45478356 Due date: 29 Jun, 202629 Jun, 2026 NA
Tender For tender for supply of copper sulphate , u/g cable armoured , mcb , socket piano modular type , u/g cable armoured , bell push , u/g cable armoured , plug top , lamp holder , lamp holder , kitchen sink with drainge board , glass pane , wire mesh , aluminium door closer , brass cp hand shower rose with pvc tube , wc seat cover (pvc) white colour , pvc cover , glass pane , glass pane , ptmt angle stop cock , bronze angle cock with flange , pvc connection , cp brass conceled spindle with cp head , pvc waste pipe , float valve , brass spindle for concealed stop cock , ss sliding door bolt , cp grating , rubber beading , ptmt stop cock , internal kit complete , gate valve , piller cock , ss handle anodised , ss sliding door bolt with hasp , ss anodised tower bolt , ss anodised hasp and staple , putty oil for glass pane , butt hinges ss , pvc waste coupling , butt hinges ss , fancy type decorative pvc sheathed gi curtain hanging rod , ss bracket chromium plated for curtain rod 19mm to 20mm , brass cp concealed stop cock , brass washer jumper 20mm qty 100 nos eact packet , brass washer jumper 15mm qty 100 nos eact packet , pvc shelf , ss cromimum bracket for 25mm dia , telescopic channel set 20 inch , telescopic channel set 22 inch , pvc 18mm thick both side plain board , damproof paint raincoat

CTN :45467579 Due date: 29 Jun, 202629 Jun, 2026 NA
Tender For supply of static sentry surveillance and detection system , ir camera , 4mp ptz camera , 4mp bullet camera , 4k ptz camera , ptz camera rain shield , ir camera rain shield , patchcord sc to sc pigtail cable , 55 inch led tv , junction box , media converter , pole with hanging bracket 65 mm 20 ft , 50 inch led tv , monitor 24 inch , key board , wireless mouse , 8 channel network video recorder , rj 45 , motion sensor light , armoured ofc cable 12 core , service cable armoured 2 core 10mm , pvc cable 1.5mm 1x90 , cat 6 cable , extension cord , lan tester , nylon plastic tie 6 and 8 inch , splicing machine , 3 kva ups , solar inverter with bty 2 kva , core i5 laptop , ni enabled drone

Central Government/Public Sector

CTN :45261449 Due date: 25 Jun, 202625 Jun, 2026 NA
Tender For corrigendum : supply of 1 wedge , 2 wedge , 3 lh-cutout edge member bottom -fwd , 4 rh-cutout edge member , 5 rh-tee member -sta -4 , 6 bracket-bot -drouge light , 7 bracket-lh-x-5360 , 8 bracket-rh-x-5360 , 9 bottom reinforcement bracket -sta-1 , 10 bracket-lh -x- 5360--top , 11 bracket-rh -x-5360--top , 12 bracket-lh -x-5360- bottom , 13 bracket-rh -x-5360- bottom , 14 cross beam -sta-15- -x-4670- , 15 bracket-lh-bottom floor sta-15to st , 16 bracket-rh-bottom floor sta- 15 to s , 17 beam -sta-13- , 18 bottom frame - bulkhead sta-17- , 19 bottom frame -sta-19- , 20 splice bracket-lh -sta-20- , 21 splice bracket-rh -sta- 20- , 22 bridging bracket-sta-16--17- , 23 bracket- external handle , 24 tee-back up fitting o-b-rh--sta- 25 , 25 tee-o-b rh -gun bay floor--sta- 22 , 26 cover plate-i-b , 27 cover plate-o-b , 28 longeron -air channel - shear wall- , 29 longeron -air channel - shear wall- , 30 shear wall longeron -top- -sta-28 t , 31 shear wall longeron -top- -sta-28 t , 32 tee o-b - lh-top- x-6450 , 33 tee o-b -lh-top- x-6450 , 34 u-c door hinge fitting-i-b-sta-25 t , 35 u-c door hinge fitting-i-b-sta-25 t , 36 u-c door hinge fitting -o-b-lh -sta , 37 top floor-lh_-sta-31 to sta-32- , 38 top floor-rh-sta-31-sta-32- , 39 fitting-outer-lh--wing pickup--sta- , 40 fitting-outer-rh--wing pickup--sta-

corporations/Associations/Others

CTN :45431388 Due date: 30 Jun, 202630 Jun, 2026 1.51 Crore
Tender For 1.4 m long m.s. channel bracket with clamp - supply of 1.4 m long m.s. channel bracket with clamp as per tender specifications tn-2155

State Government

CTN :45433596 Due date: 19 Jun, 202619 Jun, 2026 1.40 Crore
Tender For supply of supply of stone pad , supply of ms top channel , supply of ms dropper channel , supply of ms t off channel , supply of lt clamp , supply of danger board , supply of prc connector , supply of i hook , supply of dead and clamp , supply of suspension clamp , supply of ms angle , supply of barbed wire , supply of f clamp , supply of number plate , supply of holding clamp , supply of double pole clamp , supply of e bracket , supply of henley type lailless unit , supply of lt pvc cable , supply of distribution box clamp , supply of clamp with nut and bolts , supply of allunimum lug 25 kva tf , supply of allunimum lug 63 kva tf , supply of allunimum lug 100 kva tf , supply of allunimum lug 250 kva tf , supply of allunimum lug 400 kva tf , safe carriage of pcc 8.5 m pole , safe carriage of st pole 9 m pole , safe carriage of st pole 11 m pole , safe carriage of 25 kva tf , safe carriage of 63 kva tf , safe carriage of 100 kva tf , safe carriage of 250 kva tf , safe carriage of 11 kv pin insulator , safe carriage of 11 kv disc insulator , safe carriage of 11 kv disc fitting , safe carriage of 11 kv fuse set , safe carriage of earthing , safe carriage of lt ab cable , safe carriage of lt xlpe cable , safe carriage of acsr weseal conductor , safe carriage of lt pvc armoud cabler , safe carriage of distribution box , safe carriage of stay set complete , erection of pcc pole 8.5 m single support , erection of st pole 11 m single support , erection of st pole 9 m single support , erection of pcc pole 8.5 m double pole , erection of st pole 11 m double pole , laying sagging of weseal conductor , laying sagging of lt ab cable , laying sagging of lt xlpe cable , laying sagging of lt pvc armoud cable , laying sagging of lt pvc cable , erection of plinth 250 kvatf , providing and installation of fancing , erection of pipe earthing , mounting of 25 kva tf , mounting of 63 kva tf , mounting of 100 kva tf , mounting of 250 kva tf , erection and grouting of stay , erection of stone pad , fixing of barbed wire , fxing of danger board , fxing of number plate , erection of earthing complete , erection of 3 phase distribution box , erection of dead end clamp , erection of prc connector , erection of 11 kv fuse set , erection and installation of lailless unit , received back material of 10 and 16 kva tf , received back material of 100 kva tf , received back material of lt ab cable

State Government

CTN :45427476 Due date: 11 Jun, 202611 Jun, 2026 NA
Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to civil hospital jawalamukhi by providing 11/0.4 kv, 400 kva dtr a/w 11 kv ht line in electrical section amb under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.065 km), steel tubular poles 11 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm x2 no., x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, eye hook for earth wire, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, 11 kv g.o. switch, d.o fuse unit, aluminium paint, red oxide point, supply part of 11/0.4 kv 400 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble 300 sq mm, copper thimble 95 sq mm, danger plate, barbed wire, lt cable 3.5 core 400 sq. mm, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, ct pt combined unit, energy meter (3-ph, 4-wire) dlms compliant 1000/5 a ct type for 400 kva dtr, pvc multistrand 2.5 sq mm copper wire, ms angle iron (50x50x6 mm) length 2800 mm x 4 nos., ms angle iron (50x50x6 mm) length 450 mm x 2 nos., erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 400 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 400 kva dtr

State Government

CTN :45427480 Due date: 11 Jun, 202611 Jun, 2026 NA
Tender For tender for supply of equipment/material, design, erection, testing commissioning for sop to jsv by prov. 11/0.4 kv, 25 kva dtr at bohal khalsa a/w 11 kv ht line in electrical section bharoli under esd hpsebl no-i jawalamukhi ed jawalamukhi - supply part of 11 kv ht line with aaac 7/3.81 (0.692 km), steel tubular poles 10 mtr. long, steel tubular poles 9 mtr. long, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm, x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), safety & maintenance equipment for line maintenance, ci 100x50x5 mm length 2340 mm, belt ai 50x50x6 mm length 1800 mm, aluminium paint, supply part of 11/0.4 kv 25 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, distribution transformer 11/0.4 kv, 25 kva, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, lt distribution panel box for 25 kva dtr, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr, lt switched capacitor 9 kvar for 25 kva dtr, erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 25 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr
 Loading, Please wait...

Connect us via What's Up