Latest structural design service Tenders | Government structural design service Tenders

State Government

CTN :40861455

03 Jul, 2025 3.28 Crore

Sangli - Maharashtra

Tender For providing and supplying furniture to the various building at krantisinh nana patil government college for food technology, at peth, tal. -walwa, dist. sangli for mpkv rahuri - providing and supplying furnitures to the various buildings at krantisinh nana patil government college for food technology at peth, taluka walwa, dist sangli, for mahatma phule krushi vidyapeeth, rahuri ahilyanagagr, maharashtra, single bed @ 2025lx 1000dx 650h :- providing and fixing single bed of size 2025lx1000dx650 h with matress and pillow. under structure :-the legs are made of square tube of size 25x25 mm made out of ms with a thickness of 1.2mm. the legs should have corner brackets welded to it at two levels. the corner brackets are made of 2mm thick crca having a l shaped structure to join the side panels and head board to the leg . threenos .of horizontal stiffeners are provided at equal intervals. the stiffeners are made of square tube of size25x25mm made out of ms with a thickness of1.2mm. the middle horizontal stiffener has a leg at tached to it to transfer the load to the ground and add to the strength and stability of the complete structure. this legisal so made of square tube of size 25x25mm made out of ms with a thickness of1.2mm. all metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 microns dft. side panel:-the side panel sare made upof 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the over all width of the side panel is 150mm. the side panels have 18mm thick prelam particle board baton running for required lengtht oadd rigidity to the structure headboard: -the head board is made up of 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000x650mm. footboard:-the foot board is made up of 18mm thick prelamparticle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000 x 450mm. bedbase:-the bed base is made up of 12mm thick prelam particle board with both side white laminate., study/ computer table 400d x 1030w x 725h :-providing and supplying computer table as per approved design the table shal be of size 400d x 1030w x 725h including in built key board pull out tray for keeping keyboard of computer the table shall be made from 20mm prelaminated partical board . all edges are covered by 2mm thick pvc edge bands glued by hot melt glue applyed by auto edge bending machine. modesty panal made from 18mm both side prelaminated partical board all edges covered by 0.8mm pvc edge band gluve by hot melt glue applied by auto edge bending machinne, study/visitor chair :-providing and supplying nilkaml/ cello/ supreme make visitor chair of plastic with coushion for seat and back of with 55 cm depth 60cm and hight 80 cm with approximate weigth of 4 kg as per approved design and directed by engineer-incharge, dinning chair:-supplying and instalation of 6 seater dinning table of size : 1800mm w x 1200 mm d x 750 mm h with structural frame to be made in 35mm x 50mm x 1.6mm thick powder coated ms box section welded with ms champ made out at of 3 mm thick ms plate at corners. table top to be made up of 25 mm thick prelaminated mdf board conferming to is 14587:1998 table top to have 2 mm reious at the on all edges table fixed with the frame with required fitting solid wood leg to be made of 90mm x 90mm size with solid oke wood with adujustable metal leaveling screw (m10) at the bottom leg to be fixed to the structural frame with m8 philips head bolt. metal finish: all metal component to be structured matte black colour with powder coating more than 60 micron, all exposed wooden part shall be finish with good polish, wood finish with 2 coats of pu coating all wooden panel are stained to pass 4h test, di

CTN :40902604

07 Jul, 2025 12.65 Lacs

East Khasi Hills - Meghalaya

Tender For providing of hiring of consultancy services - percentage based - technology consultants; consultancy service for oil investigation and structural design, drawings , preparation of estimates, boq & yard stick (04 x wks) jorhat; yes; hybrid(as specified in scope..

CTN :40902695

07 Jul, 2025 4.85 Lacs

East Khasi Hills - Meghalaya

Tender For providing of hiring of consultancy services - percentage based - technology consultants; soil investigation and structural design, drawings , preparation of estimates, boq & yard stick for aizwal mil stn; yes; hybrid(as specified in scope of work)

Central Government/Public Sector

CTN :40785877

07 Jul, 2025 64.3 Thousand

Raiwala - Uttarakhand

Tender For corrigendum : construction of new building for echs polyclinic at raiwala mil stn (preparation of structural design and drawings of the followings buildings based of arch drgs)

Central Government And Public Sector

CTN :40886004

19 Jul, 2025 NA

Mumbai - Maharashtra

Tender For providing of hiring of consultants - milestone/deliverable based - technology consultants; preparation of structural drawings, ph design and drawings, construction working drawings and allied equipment foundations etc for 2 mgd swro plant civil building, based on..

State Government

CTN :40882295

03 Jul, 2025 NA

Jammu - Jammu And Kashmir

Tender For rendering consultancy service for providing of architectural drawings structural design with calculations soil investigation rendering consultancy service for providing of architectural drawings structural design for shri ranbir srml parade, jammu.

Central Government And Public Sector

CTN :40875606

07 Jul, 2025 16.99 Lacs

Delhi - Delhi

Tender For for procurement of building materials for undertaking the work of conservation of shish gumbad at losdhi garden complex new delhi - conservation work, unslaked lime (rajgarh/katni) in proper packing, coarse sand in good quality free from dust & foreign meterials, surkhi of 1st class bricks free from dust and foreign materials, belgiri (well dried), gur/ sheera, gum (babool), safedi (daliya lime), stone dust/chips 1st quality (free from clay organic matter etc.), batasha, rope sisal/jute (25mm dia), wooden planks of size 3.0 x 0.25 x 0.05m, bamboo solid (hight upto 10), ss clamps ( standared size or as per requirement of site incharge), round off chemical for up rooting the tree from structure, cr stone (size as per site requirement), red sand stone (as per site requirement), brick aggregate (40mm nominal size (must be free from clay/silt/organic matters etc. and well graded), common burnt clay fps (non modular) bricks class designation 7.5 (1st class), stone aggregate (single size) 20mm nominal size (free from any organic matter clay impurities), stone aggregate (single size) 10mm nominal size (free from any organic matter clay impurities), portland cement (opc-43 grade) isi marked (50 kg), fine sand (zone iv)free from impurities, prime having voc content less than 50 grams/litre, synthetic enamel paint (colour as per site requirement), base plates 150x150x5mm for 50mm dia long pipe, swival coupleer for 50mm dia pipe, right angle coupler (as per required size & design), steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (2 nos. of gate) (as per required size & design), disposal of moorum / malba/rubbish similar unserviceable, or waste material by mechanical transportation including loading, transporting unloading to approved dumping ground lead up to 10 to 15 km approx. 9capcity 8 cum/trip), provind and fixing double scaffolding system (cup lock type) on the exterior side up to seven story height made with 40mm dia m.s. tube 1.5m centre to centre horizonal & vertical tubes m.s tube cahllies m.s. amps and m.s. staircase system in the scaffolding for working platform etc.and maintaining it in a serviceable condition for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings runners connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer-in-charge the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irresopective of duration of scaffolding., hydraulic excavator with driver and fuel, hire & running charges of loader, hire & running charges of concretye mixer with hooper, hire and running charges of vibrator, pvc mug (standard size & quality), pvc bucket (standard size & quality), cane basket (standard size & quality), pvc pan (tasla) (standard size & quality), polythene sheet (standard size & quality), pvc gum boot (pair) (standard size & quality), first aid box with medicine, diesel for machine, loading rickshaw with wooden body & motor cycle wheel, repairing of mixture machine as per site requirement, pvc pipe 1" dia, submersible pump 1.5 hp (isi mark), agro shed green net cloth 3 m wide, safety belt isi marked, water tank pvc 500 ltr isi marked triple layer, water tanker 2000 ltr for supply on hiring basis, safety helmet isi marked, provision for photo documentation & drawings of the conservatgion work

State Government

CTN :40877401

08 Jul, 2025 19.87 Lacs

Thiruvananthapuram - Kerala

Tender For kiifb-coastal highway - tvpm - stretch 1 - land acquisition-structural valuation- structural design work

CTN :40870108

07 Jul, 2025 7.00 Lacs

Ernakulam - Kerala

Tender For providing of hiring of consultancy services - percentage based - consultancy services for outsourcing structural design provision of deficient single living accommodation for training sailors at niat naval base kochi; outsourcing of structural design; yes; hybrid..

CTN :40841825

14 Jul, 2025 NA

Doda - Jammu And Kashmir

Tender For engagement of consultant for providing consultancy services including survey, detailed investigations, study, structural design, estimation, preparation of detailed project report & getting it vetted from state technical agency (sta) and principal technical agencies (pta) for bridges in block bhagwah & gundna of pmgsy division doda of district doda under pmgsy-iv in jammu province j&k ut

Structural Design Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government And Public Sector

State Government