Latest structural steel work Tenders | Government structural steel work Tenders

CTN :41822875

22 Sep, 2025 16.84 Lacs

Vadodara - Gujarat

Tender For fabrication and erection of structural steel works in connection with civil structural and underground piping works

CTN :41770460

19 Sep, 2025 NA

Bardhaman - West Bengal

Tender For supply of dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof coverings etc complete all as specified , dismantling of plain or corrugated ac sheeting any gauge thickness including nainital or similar pattern roof coverings etc complete all as specified. , dismantling of framed work timber scantlings 40 sqcm and over in section in any position complete all as specified and as directed , dismantling of framed timber scantlings under 40 sqcm in sections for filletsrailspostsrafters purlins etc complete all as specified and directed by enggincharge. , demolition of brickwork or stone boulder masonry built in lime mortar including all quoins arches pillars etc but excluding ashlar facings dressed stonework , dismantling of structural steel work including doors gates but excluding framed truss etc. complete all as specified and as directed , dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by enggincharge. , taking down chowkhats or frames not exc.1.50 sqm each without taking off shutters from frames complete all as specified and as directed by enggincharge. , taking down chowkhats or frames exc 1.50 sqm but n exc 4.00 sqm each but with shutters without taking off shutters from the frame complete all as specified and as directed by enggincharge. , demolition of cement concrete unreinforcement in ground floors and pavings n exc 15 cm thickness below or above ground level complete all as specified. , surface excavation n.exc not exceeding 30 cm deep and averaging 15cm deep and getting out harddense soil complete all as specified. , removing building material etc to a distance 2km including loading and unloadingstacking at the destination complete all as specified. , pick axe as per is 273 (q4)

Central Government/Public Sector

CTN :41347327

22 Sep, 2025 80.00 Lacs

Ernakulam - Kerala

Tender For corrigendum : providing of custom bid for services - revamping of cantilever skidding, sub structure skidding and jacking system for jur sagar kiran

CTN :41775988

20 Sep, 2025 19.17 Lacs

Dharmapuri - Tamil Nadu

Tender For supply of sop boards , slogan writing and poster painting , vinyl sticker , banners , grass cutting machine , transportation up to 500 km upto 20 t , structural steel works , supply and installation of gi grating , supply and instn of galvalume sheet , modification of existing structural steel , welder services , plumber services , o2 cylinder refilling , n2 cylinder refilling , fan slip roll , unskilled manpower , seal wire , distance measuring device laser , branding of pipelines , chain pulley 2 t , painting of fire engine exhaust pipe

corporations/Associations/Others

CTN :41735318

11 Sep, 2025 2.50 Lacs

Coimbatore - Tamil Nadu

Tender For supply and fixing of new 5000lit sintex tank with 10m height of tower errection at ward no 25 e b office street in karamadai municipality - earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rock inclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation, plain cement concrete in mix 1:4:8 (one cement , four sand and eight aggregate) using 40 mm bss hbg metal including cost and conveyence of all meterials to work site and labour charges for mixing, laying, curing etc complete as per the standard specification., cement concrete in 1:2:4 [one cement and two sand and aggregate using 20mm size iss grade machine crushed metal including the cost of mixing laying curing etc., complete complying with standard specification., supplying, fabricating, erecting structural steel work for roofing welded or bolted type using ms channels, angles, plates and round bars etc. conforming to is specification including primer coating as per design given by the departmental officers etc, complete as per standard specification, painting two coats with ready mixed enamel paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors., supply and fixing of 5000 lit hdpe tank isi make with all accessories such as tank nipple, washer etc,including cost and conveyance of all materials to site etc, complete as per standard specifications., supply and fixing of g.i. and pvc pipes and specials and electrical items as per i.s. specification including packing, loading, unloading, freight, stacking and transist insurance etc.complete as per standard specification. 2" g.i pipe, 2" pvc pipe, 2" g.i elbow, 2" g.i coupler, 2" pvc gate valve, pvc adhesive 100 gm bottle, shellac 100 gm, flange, laying and jointing pvc & gi pipe and specials including conveyance of all charges etc complete .

Central Government/Public Sector

CTN :41703951

19 Sep, 2025 22.36 Lacs

Mumbai - Maharashtra

Tender For construction of elevated security watch tower in structural steel work at the sea shore of the institute, colaba.

CTN :41723105

13 Sep, 2025 NA

Dimapur - Nagaland

Tender For construction of 03 x orl shelter with furiture - sch of works, or living shelter. size 12.0m x 6.10m with 1.50m wide front & rear verandah, three doors, seven aluminium sliding windows (1200 mm x 1200 mm), false ceiling made of 30mm puf panels, wall cladding made of 50mm puf panels, roof cladding made of 0.6mm ppgi colour coated sheets and three steel trusses made of portal frame structure. main column with web-300 200 x 5mm thick and flanges of 125 x 8mm thick, main rafter with web-250 150 x 5mm thick and flanges of 100 x 8mm thick, 110 x 8mm thick and cantilever verandah rafter of same dimension. the three main portal frames are provided at a distance 6.0 mtr centre to centre and interconnected by z / c purlins at spacing all as given in the drawing no lvg-01, seven sheets attached. detailed specification of shelter and constr part as given in appx a and appx batt. store list of elect items and constr mtrl are att as per annx - i & ii., (a) provn of double sleeping bunk with matteress as per tech specification given in appx c, (b) provn of bed side locker as per tech specification given in appx d., (c) provn of chair writing as per tech specification given in appx e, (d) provn of writing table as per tech specification given in appx e., (e) provn of water dispenser as per tech specification given in appx e., (f) provn of fire extinguisher 1 kg capacity as per tech specification given in appx e.

CTN :41560817

15 Sep, 2025 NA

Bardhaman - West Bengal

Tender For corrigendum : m.s. structural steel work along with the painting at bottom ash silo #7 under dpps, dpl.job no. 932/dpps.

corporations/Associations/Others

CTN :41672354

23 Sep, 2025 NA

Kanpur - Uttar Pradesh

Tender For renovation and construction of shed and paver block work : - dismantling of old toilet block approx area 4 x6 sqm detail specification as per annexure a , clearing jungle of girth up to 50 cm measured at a height up to 3 m above ground level detail specification as per annexure a , earth work in excavation by mechanical means detail specification as per annexure a , demolishing brick work manually or by mechanical means detail specification as per annexure a , dismantling old plaster or skirting raking out joints and cleaning the surface for plaster at all height detail specification as per annexure a , removing and re fixing of m.s grill out side from middle wall to side wall including detail specification as per annexure a , providing and laying in position cement concrete of specified grade m 7 point 5 detail specification as per annexure a , 52 mm thick cc flooring with concrete hardener topping detail specification as per annexure a , p and f glass strips in joints of cement concrete floors detail specification as per annexure a , repairing of crack in flooring with help cement mortar with hardener and chemical detail specification as per annexure a , making plinth protection 50mm thick of cement concrete m1o detail specification as per annexure a , 15 mm cement plaster of mix 1 isto 4 cement coarse sand in wall and ceiling detail specification as per annexure a , repairing and maintenance of window with fabrication detail specification as per annexure a , repairing and maintenance of rolling shutter fabrication detail specification as per annexure a , repairing and maintenance of ms shutter fabrication of damaged work detail specification as per annexure a , renewing glass panes with putty and nails detail specification as per annexure a , clearing of roof by wire brush and joint of brick detail specification as per annexure a , providing and applying 20 mm thick water proof cement plaster detail specification as per annexure a , providing and laying in position specified grade of rcc m20 in foundation and up to plinth detail specification as per annexure a , providing and laying in position specified grade of rcc m20 in column detail specification as per annexure a , rcc work m20 in beams shelves chajjas lintels bands plain detail specification as per annexure a , centering and shuttering foundations footings bases of columns detail specification as per annexure a , centering and shuttering columns pillars piers abutments posts and struts detail specification as per annexure a , centering and shuttering lintels beams plinth beams girders detail specification as per annexure a , centering and shuttering suspended floors roofs landings balconies and access platform , steel reinforcement for rcc work including straightening cutting bending placing detail specification as per annexure a , brick work of class designation 7point5 in foundation and plinth cement mortar 1 isto 6 detail specification as per annexure a , brick work bricks of class designation 7point5 in superstructure above plinth level up to floor v cement mortar 1 isto 6 detail specification as per annexure a , half brick masonry bricks of class designation 7point5 in superstructure above plinth level up to floor v level cement mortar 1 isto 3 detail specification as per annexure a , structural steel work riveted bolted or welded in built up sections trusses and framed work detail specification as per annexure a , p and f precoated galvanised iron profile sheets zero point 5 mm total coated thickness with zinc coating 120 grams per sqm detail specification as per annexure a , 12 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , 15 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , cement plaster 1 isto 3 1 cement 3 coarse sand finished with a floating coat of neat cement detail specification as per annexure a , providing and laying integral cement based water proofing treatme

CTN :41430559

15 Sep, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and installation of training items for solar technician (electrical) trade under craftsman training scheme (cts) at consignee locations - measuring steel tape: 5 meter, plier: combination, 200 mm, screw driver: insulated, 4 x 150 mm, screw driver: insulated, 6 x 150 mm, screw driver: insulated, 8 x 200 mm, screw driver: insulated, 10 x 250 mm, center punch: 100 mm, electrician s knife: 100 mm, neon tester: 500 v, steel rule: 300 mm, graduated both in metric and english unit, hammer: cross peen, 500 grams with handle, chart: electrical symbol and basic electronic component, pipe vice: 100 mm, hand vice: 50 mm, bench vice: 100 mm, hacksaw frame: adjustable, 250 mm to 300 mm, hacksaw frame: fixed, 150 mm, file: flat, second cut, 200 mm with handle, file: half round, second cut, 200 mm with handle, file: round, second cut, 200 mm with handle, plier: long nose, 200 mm, plier: flat nose, 150 mm, plier: round nose, 150 mm, spanner set: double ended, 6 mm to 32 mm, set of 12, standard wire gauge: metric, portable electric rotary hammer drill machine, crimping tool: 0.5mm to 16mm , crimping tool: 2.5mm , 4mm , 6mm , crimping tool: 25mm to 400 mm , plier: side cutting, 200 mm, wire stripper: adjustable length, hammer: ball peen, 500 grams with handle, scriber: bend and straight, 150 mm, 5 tray cantilever tool box: w:d:h = 450:200:200, 20 mm, plastic tool box: w:d:h = 550:300:250, 20 mm, 7 drawer tool trolley: w:d:h = 700:450:900, 25 mm, allen key set: hexagonal, 1.5 mm to 10 mm, set of 9, scissor: 200 mm, paper, plastic handle, right hand, electrical load trainer, torque wrench: 5 nm to 25 nm, pipe cutter: wheel type, 3 mm to 30 mm, pipe cutter: for pvc pipe, upto 42 mm, engineer s square: 150 mm blade, load bank: variable, 1.2 kw, lamp/ heater type, wire cutter and stripper: 150 mm, earthing plate set, earthing electrode set, micrometer: outside, 0 mm to 25 mm, lc = 0.01 mm, tap and die set, platform trolley: 150 kg, rooftop mounting structure: 2 kw, gi, rooftop mounting structure: 2 kw, aluminium, electrical wiring and switch gear rack: training kit, protective relays and contactors trainer, demonstration board: circuit breakers and fuses, rccb with isolator, demonstration board: electrical cables, solar dc cable: 4 sq.mm, red, solar dc cable: 4 sq.mm, black, mc4 solar connector, hacksaw blade: length = 300 mm, width = 12.5 mm, thickness = 0.63 mm, tpi = 18, low alloy, packet of 100 blades, pickaxe, spade, wheel barrow: 2 wheels, 50 liters, trowel: brick, 8 inch x 5.5 inch, trowel: heart, 6 inch, trowel: plastering, 8 inch x 5 inch, trowel: pointing, 6 inch, plastic tub: 20 liter, manual earth auger, stillson pattern pipe wrench: length = 300 mm, opening = 42 mm, spanner: adjustable, 300 mm, universal quick adjustable multi-function wrench spanner set, multimeter: solar, insulation resistance tester: digital type, hydrometer, solar insulation tester: digital, pyranometer, lux meter: upto 1 lakh lux, magnetic flux meter, clamp meter: solar, soldering iron set: solar technician (electrical), thermometer: digital, 0 to 150 degree celsius, sun shine recorder, weather monitoring station, sunlight radiation meter, magnetic compass, cut model: photo voltaic cell assembly, cut model: lead acid battery, battery: lead acid, tubular, solar, 12v, 150 ah, simulator: solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells, demonstrator kit: solar tracker, solar pv e-learning software, halogen lamp with stand, bench grinder: double ended, 200 mm, solar photovoltaic module: 75 w mono crystalline module, solar photovoltaic module: 75 w amorphous silicon module, solar photovoltaic module: 250 w thin film module, solar photovoltaic module: 5w poly crystalline module, solar photovoltaic module: 10w poly crystalline module, solar photovoltaic module: 40w poly crystalline module, solar photovoltaic module: 250w, solar mppt meter, solar charge controller: dusk to dawn automati

Structural Steel Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others