Latest stub shaft Tenders | Government stub shaft Tenders

Central Government/Public Sector

CTN :41026248

31 Jul, 2025 NA

Haridwar - Uttarakhand

Tender For tender for supply of tool and equipment d d - stub shaft dia 475 , stub shaft dia 530 , stub shaft dia-450 , stub shaft dia. 475 , stub shaft dia. 450 , technological shaft , technological shaft , technological shaft

corporations/Associations/Others

CTN :40561036

15 Jul, 2025 21.63 Lacs

Kasimpur - Uttar Pradesh

Tender For corrigendum : procurement of spares of lp turbine shaft sealing and casing assembly for overhauling of unit no 9, dtps, htps, kasimpur

CTN :40969753

17 Jul, 2025 NA

Jhabua - Madhya Pradesh

Tender For supply of aph flue gas dampers spare - slave shaft, item no:9,od : d95:640, drive shaft, item no:8 rod dia: 95:1090, stub shaft, item no:10,rod dia: 95:425, jamb seal assy. (stub end), item no:11, jamb seal assy. (drive end) item no:12, gland dia 127x12.5:50,item no:14, bearing holder,d.127x20,item no:16, shaft collardia:95,item no:19, blade pin rod d33:l195,item no:24, slave shaft od : d95:726,item no:9, drive shaft rod dia: 95:1228,item no:8, stub shaft rod dia: 95:435,item no:10, jamb seal assy. (stub end), item no:11, jamb seal assy. (drive end) item no:12, gland dia 127x12.5:50,item no:14, bearing holder,d.127,item no:16, shaft collardia:95,item no:19 dr -373, blade pin rod d33:l195,item no:24 dr.373

State Government

CTN :40967009

15 Jul, 2025 15.42 Lacs

Multi City - Karnataka

Tender For carrying out detailed rla studies on unit-1 turbine runner assembly and servo shaft at mani dam power house

Central Government/Public Sector

CTN :40969783

11 Jul, 2025 NA

Mandal - Gujarat

Tender For supply of roto pump spares > - 1) model: rmab602r7cd1d, tag no: 12p-5 a/b (serial no: h1-1188, 1189), bearing spacer (external), stuffing box gasket, tie rod, gland guard, mechanical seal housing, mechanical seal plate, straight through end cover, pump housing, shaft, pin retainer, rotor, bonded stator, water thrower, bearing cover, bearing housing, o-ring (for part no: 5450 & 5860), drive screw (for part no: 7910,5312,0110,0760), universal joint, universal joint kit complete, taper plug, locking washer, bearing lock nut, grease seal (for part no: 0110)-brg.cover, grease seal (for part no: 0410)-b.housing, 2) model: rlab591r0zz1z, tag no: 14p-12 a/b/c/d ((serial no: hi-1467 to 1470), bearing spacer (external), stuffing box gasket, tie rod, gland guard, mechanical seal housing, mechanical seal plate, straight through end cover, pump housing, shaft, pin retainer, rotor, bonded stator, water thrower, bearing cover, bearing housing, balance mechanical seal- eagleburgmann, drive screw (for part no: 7910,5312,0110,0760), universal joint main kit complete, universal joint head, 3) model: rlab571h0zz1z, tag no: 14p 13 a/b/c/d/e/f/g/h/i ((serial no: hi-1443, 1445, 1446), bearing spacer (external), tie rod, gland guard, mechanical seal housing, mechanical seal plate, straight through end cover, pump housing, shaft, pin retainer, coupling rod, rotor, bonded stator, water thrower, bearing cover, bearing housing, punched washer (for part no: 15), balance mechanical seal, drive screw (for part no: no: 7910,5312,0110,0760), universal joint head, universal joint main kit complete, taper plug, locking washer, bearing lock nut, spring washer (for part no: 15), grease seal (for part no: 0110)-b.housing, grease seal (for part no: 0410)-brg.cover, parallel key (for part no: 3200), 4) model: rlab571r0zz1z, tag no: 14p-13 a/b/c/d (serial no: hi-1455, 1457,1458, 1465-1466, gh 174329), bearing spacer (external), seal plate gasket, stuffing box gasket, tie rod, gland guard, mechanical seal housing, mechanical seal plate, straight through end cover, pump housing, stub shaft, shaft, dowel pin, pin retainer, rotor, bonded stator, water thrower, bearing cover, bearing housing, punched washer (for part no: 10), punched washer (for part no: 15), balance mechanical seal, drive screw (for part no: 7910 & 7950), universal joint head, universal joint main kit complete, taper plug, locking washer, bearing lock nut, spring washer (for part no: 15), grease seal (for part no: 0110)-b.housing, grease seal (for part no: 0410)-brg.cover, parallel key (for part no: 3200), 5) model: rdaa491r0zz1z, tag no.14p-13-s/t/u/v/q/r/h/g (serial no: hi-1474- 1478), tie rod, gland guard, mechanical seal housing, mechanical seal plate, straight through end cover, pump housing, shaft, pin retainer, rotor, bonded stator, water thrower, bearing cover, bearing housing, balance mechanical seal, drive screw (for part no: 7910,5312,0110,0760), universal joint head, universal joint main kit complete, taper plug, grease seal (for part no: 0110)-b.housing, grease seal (for part no: 0410)-brg.cover, parallel key (for part no: 3200), bearing spacer (external), seal plate gasket, stuffing box gasket, 6) model: rdaa531r0zz1z,, tag no: 14p-13 e/f (serial no: hi-1471 ,1472), tie rod, gland guard, mechanical seal housing, mechanical seal plate, straight through end cover, pump housing, shaft, pin retainer, rotor, bonded stator, water thrower, bearing cover, bearing housing, balance mechanical seal, drive screw (for part no: 7910,5312,0110,0760), universal joint head, universal joint main kit complete, taper plug, grease seal (for part no: 0110)-b.housing, grease seal (for part no: 0410)-brg.cover, parallel key (for part no: 3200), bearing spacer (external), seal plate gasket, stuffing box gasket, 7) model: rdaa551h0zz1z, tag no: 8p-1 a/b (serial no: hi-1440 , 1466, 1439), tie rod, gland guard, mechanical seal housing, mechanical seal plate, straight through end cover, pump housing, shaft, pin

corporations/Associations/Others

CTN :39986654

14 Jul, 2025 NA

Bokaro - Jharkhand

Tender For corrigendum : custom bid for services - verification and health checking of bently-nevada make turbine differential expansion etc of ctps u7 during the coh-01) health checking verification, replacement if any, refitting & commissioning of:- a) all bearing and shaft vibration sensors and related modules of turbine/generator bearing. b) lpt differential expansion sensors and related modules at turbine brg no.-4. c) axial shift sensor and keyphasors sensors. d) bearing vibration sensors and keyphasors and its related modules of id fans, fd fans, coal mills, pa fans, cw pumps, ceps and bfps. e) all the cables associated with the above measurements. f) work related to running unit 8 ctps as per availability of work front and up to extent possible. 02. preparation of documentation like verification report of sensors and modules. 03. work assistance:- the entire job is to be carried out by m/s ge oil & gas india private limited. however, dvc will provide work assistance of technicians and helpers to carry out the said jobs. 04. any special tools like shacker table, tk 3e or other equipment s require for the execution of the above mentioned job, especially for lp turbine deferential measurement system are to be brought by m/s ge oil & gas india private limited. 05. all the spares will be provided by dvc..

corporations/Associations/Others

CTN :40605375

11 Jul, 2025 29.93 Lacs

Bankura - West Bengal

Tender For corrigendum : providing of custom bid for services - deputation of service engineer for dismantling, verification, health checking, calibration and refitting of tsi n vms of main turbine shaft & bearing vibrations, generator shaft n bearing vibrations, all other all ht drives ..

State Government

CTN :40872507

14 Jul, 2025 1.26 Crore

Multi City - Karnataka

Tender For re babbiting-dismantling of bearings and pads from housing,rebabbiting of 10 nos tgb thrust pad along with all accessories,rebabbiting of turbine guide bearing, mid bearing & end bearing along with floating seals and all accessories,material composite test, ut test and dp test should be done for re-babbitted material,assembly of re-babbited bearings with blue match,submitting the video graphs of re-babbiting and reports of re-babbiting.re-alignment-the reason for shifting of generator shaft by 2 to 3 mm shall be analyzed and rectification works needs to be carried out,complete dismantling, assembling, painting and re-alignment of machine shaft,inspection of turbine shaft journal surface and repairs if required,inspection/replacement of worn out bushes and seals of guide vane, if necessary,inspection and repair of labyrinth ring, face plates, guide vanes and runner,guide vanes bed setting,tgb water cooler descaling work to improve the efficiency of cooler,complete assembly of machine,checking the magnetic axis of the generator and to ensure its alignment, checking of the unit leveling at all places and complete alignment of machine shaft,testing & commissioning of complete machine,painting of entire machine,checking of vibration & site balancing of machine,submission of vibration, balancing & alignment reports.flow switch-supply and installation of flow switch (flow rate110 lpm) along with 01 no 01 nc contact for inlet and outlet lubrication oil pipelines,supply and installation of pressure switch (30bar) for inlet and outlet lubrication oil pipelines,supply and installation of level switch for in tgb oil sump.replacement of new miv trunion shaft-dismantling of miv counter weight, miv servomotor assembly, and other related parts,lifting of miv from the bed,transportation of miv to the firms place, if required,replacing old nitrile rubber trunnion seals with existing profile by new one on both sides,replacements of miv trunnion shaft. providing of necessary drawings,material composite test, ut test and dp test should be done for new trunnion shaft & trunnion seals, bushes etc,all related fasteners and dowel pin to be replacing by new one,drive and non drive end trunnion bush, cupseals, stop end plate, washer ring etc need to be replacing by new one,repair of miv discand main body to be attended, if required,supply and replacement of miv disc rubber seal,pressure testing and commissioning should be carried out as per standard in presence of kpcl engineers,all tools & tackles required for the above mentioned works shall be arranged by contactor only.

Central Government/Public Sector

CTN :40888792

28 Jul, 2025 NA

Kalyan - Maharashtra

Tender For supply of stub shaft taper to emd part no. 9546333 and dlw part no. 16140175 as per drawing number 9546333 alt aa or latest. drawing attached. note: to be procured from the past proven suppli er of indian railways of the same item. test certificate (tc) and guarantee certificate (gc) are also req uired from the supplier. ]

State Government

CTN :40852661

15 Jul, 2025 8.62 Lacs

Raichur - Karnataka

Tender For procurement of spares for hot pa control dampers of boiler and auxiliaries - cross over lever ii, cross over link of had, lever -ii of had, lever -i of had, split pin of had, nylon bush of had, knuckle(lh) of had, knuckle(rh) of had, blade pin of had, shaft collar of had, sh 1.6 of had, adjusting link-hot pa cd, hex nut m20-hot pa cd, lock nut m20-hot pa cd, stud m20 rod-hot pa cd, follower plate -hot pa cd, bearing (grafoil) sh-hot pa cd, bearing holder rod-hot pa cd, packing rope- hot pa cd, gland od88.9x12.5 -32-hot pa c, gland plate-hot pa cd, stub shaft- hot pa cd, slave shaft-ii rod-hot pa cd, slave shaft-i rod-hot pa cd, drive shaft rod-hot pa cd

Stub Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors