Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l
Tender For bid to ras bid to ras providing of design installation and maintenance of educational lab/centre - science lab; supply and installation of hardware, teacher training; service provider - pin board 3x2ft, re safety and first aid, wooden table for students, sturdy stools, table chair for teachers, steel cupboard, white board, tool panel, display shelf, , nameplate, classroom electrical, space-themed mural, solar axis tracking system, , chromatography, water filter, hydraulic bridge, parallel and series circuit, electronics kit for class, optics & mirror leaming, rapid oxidation kit, ray box, diy lungs working, electrolysis & electroplating kit, maxwell wheel, ohm's law apparatuu with power supply, industrial material separator, diy sound speaker, solar water pump, energy conversion kit, dna double helix model, mini biped robot, separation of material, skeleton on stand, human torso model, solar car
Tender For corrigendum : tender for supply of shaft along with impeller keys , bearing lock nuts (2 nos.) and lock washers (2 nos.) , material of construction of shaft and impeller keys- forged aisi 316(forging conforming to astm standard a-473) , bearing lock nut material- en-8 , as per drawing no. nfv/u/m-193 and nfvp/m/u/lw/p14 (drawing for lock washer) , for hydrolyser feed pump 11-p-14a/b. , shaft size f85x762x5l 820 , impeller lock nut radial side , material of construction- sus420j2/taft or equivalent. dimensions as per nfl drawing no.- nfvp/u/m/p6-678 fluid- steam condensate , working pressure- 30kg/sq. cm. , working temperature- 80 degree celsius , impeller lock nut thrust side , material of construction- sus420j2/taft or equivalent. dimensions as per nfl drawing no.- nfvp/u/m/p6-678 fluid- steam condensate , working pressure- 30kg/sq. cm. , working temperature- 80 degree celsius , shaft with bearing locknut and lock washer , material of construction- sus420j2 or equivalent. dimensions- as per nfl drawing no.- nfv/u/m-187 fluid- steam condensate , working pressure- 30kg/sq. working temperature- 80 degree celsius. , shaft along with impeller lock nut and keys as per drawing no.nfv/u/m-194 rev.(2) , material of construction-forged aisi 316 conforming to astm standard a-473). , shaft along with impeller nut , bearing lock nut and key as per drawing no. nfv/u/m-54 rev.-3 , material of construction of shaft , impeller nut and key- forged astm a-276 ss 316 , bearing lock nut material- en-8.
Tender For sale of unserviceable material and scrap at verka bathinda dairy. - sale of unserviceable material and scrap at verka bathinda dairy (note:- bidders participating for item no. 1.05 and 1.06 must have authorized certificate from ppcb/cpcb for handling plastic waste- copy of certificate to be attached) :-, ghee tin 500 ml, 01 ltr, 02 ltr, wmp/ghee tin 10 kg and 15 kgs, damage kraft paper bag smp and wmp, all type of plastic milk tray, ice cream crate, pallets, all type of plastic cup (dahi/ice cream/kheer/rabri etc.), all type of milk , lassi, dahi, ice cream poly film scrap, smp/wmp poly liner scrap, c/box scrap all type, plastic bucket / cannies, 15 kg and 05 kg curd matka plastic, steam valve, gadder scrap, rl 32 oil, bearing, fly killer, electric weighing scale, tyre, old batteries, key board, mouse, led screen, ups, tonner, printer, chessie tanker, tata 407 chessie, amcu/dpu set, generator enginee 30 kva, generator enginee 250 kva, furness oil, steam trap valve, air cylinder, welding machine 3 phase, vaccume pump, iron scrap, altinator
Tender For bid to ras supply of cooling pad 2 feet x 4 feet with fitting , cooling pad frame alluminium 2 feet x 4 feet , water circulation pipe for pad frame , repairing fogger system with fogger and material , green net , insect net , gi profile with installation , zigzag spring with installation 8 mm , fogger with lpd with installation , uv stabilized film , uv stabillized film greennet insect net installation labour , exhaust fan with installation , 15 w solar street ligh system set with installation , 15 w solar street light repering work , motor repairing 1.5hp , 2 hp three phase exhaust fan motor repairing , 2 hp three phase exhaust fan new motor with installation , gi pipe 1.5inch 2 mm thikness with fitting , gi pipe 2inch 2 mm thikness with fitting , repairing of panelboard , 2 core 4 sq cable with fitting , 3 core 4 sq cable with fitting , 4 core 4 sq cable with fitting , fiber or pvc gutter with fitting , temperature controller with fitting , humidity display with fitting , fogging auto controller with fitting , bedsheet 100 micron , fabrication work , electric work , plumbing work upvc pipe and fitting 50 mm , plumbing work pvc pipe and fitting 63 , micro irrigation facility for plantation , micro irrigation facility for hitech nursery , 16 mm lateral with installation , 16 mm inline with installation , 8 lph dripper with fitting , inverted modular sprinkler or fogger sytemt for nursery , installation of foundation pipe pole digging and civil material without pole , hp solar controllar , hp solar motor pump , 545 watt solar panel with fitting , 50 mm10 kg isi hdpe pipe , remove damage uvsheet greennet insecti net profile