Latest surf board Tenders | Government surf board Tenders

CTN :43529892

20 Jan, 2026 NA

Multi City - Multi State

Tender For supply of cement,agregate,sand,bolder,floor tiles kajaria,labour charges,plywood 12mm 8x4,plywood 19mm 8x4,wood peices 2 inch x 2inc 10ft

CTN :43522911

19 Jan, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For supply of leg press - outdoor gym equipments (q3) , chest press - outdoor gym equipments (q3) , twister - outdoor gym equipment (q3) , air walker / stroller - outdoor gym equipment (q3) , parallel bar - outdoor gym equipment (q3) , surf board - outdoor gym equipment (q3) , sit up board - outdoor gym equipment (q3) , shoulder builder / arm wheel - outdoor gym equipment (q3)

CTN :43035327

12 Jan, 2026 NA

Bhavnagar - Gujarat

Tender For bid to ras supply of air walker / stroller - outdoor gym equipment (q3) , chest press - outdoor gym equipments (q3) , twister - outdoor gym equipment (q3) , sit up board - outdoor gym equipment (q3) , surf board - outdoor gym equipment (q3) , parallel bar - outdoor gym equipment (q3) , leg press outdoor gym equipments (q3)

CTN :43494625

15 Jan, 2026 6.36 Lacs

Multi City - Karnataka

Tender For supply of material and machinaries the construction of a kitchen at the kannada higher primary school in bannur village of athani taluka - pvc pipe of 4kgcum75 mm morb35, ceramictiles 30x 30 cms morb25, providing and installing of pre painted galvalume iron trapezoidal profiled sheet, providing and fixing in position brass bib cock of approved quality 20mm nominal bore, providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm, fabricating, supplying and erecting m.s. tubulartruss, providing and fixing in position black cuddapah slab / shahabad slab / thandur blue slab 4 cms thick, providing and fixing glazed vitrified tiles of approved make, quality and colour of size 600x600x10mm thick, providing and fixing in position in cement concrete steel glazed windows and ventilators side hung/top hung fully openable as per approved drawings, providing and applying two coats dry distemper of approved brand, and shade on wall surface including priming coat and whitening after throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications, providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specificaiton, atn9 hom of vibrator 0.71 days, atn8 plasticizer / super plasticizer, atn7 mixer (concrete) - 1 cum capacity, atn6 portland cement, atn5 broken stone aggregate 12 mm to 10 mm size, atn4 broken stone aggregate 20 mm size, atn3 broken stone aggregate 40 mm size, atn22 burnt bricks class 35 (non modular), atn2 coarse sand (zone iii), atn15 mixer (concrete small used in culvert), atn14 bond stone 20 x 20 x 45 cm, atn13 rubble stones, atn11 binding wire, atn10 tmt bars fe 500, atn36 providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on10mm thick cement plaster, atn30 providing and fixing in position fully panelled matti / nandi wood shutters for doors, stylesand rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as perdrawing and panels of 20mm thick including cost of materials, labour, hom of machineries complete asper specifications. ( excluding cost of fixtures ), atn26 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for chejja, atn46 providing and placing on terrace, polyethylene water storage tanks with manhole lidand suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flowpipes, including cost of all materials, labour, transport charges, hom of equipments and testingcomplete as per specifications.(for 1000 litre capacity) as per is 12701 1996. specification no.kbs13.22, atn39 providing and finishing external walls in two coats with waterproof cement paint ofapproved brand and shade to give an even shade after throughly brooming the surface to remove all dirtand loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications., atn29 providing matti / nandi wood frames of doors, windows, clerestory windows, ventilatorsand other frames, wrought, framed or assembled including making plaster groves ( excluding cost ofcement concrete and side clamps ), but including cost of materials, labour, hom of machineriescomplete as per specifications., atn28 providing and removing centering, shuttering, strutting, propping etc., and removal ofform work for roof slab, atn25 providing and removing centering, shuttering, strutting, propping etc., for beams

CTN :43496848

16 Jan, 2026 15.99 Lacs

Multi City - Karnataka

Tender For supply of material and machineries for the construction of g.p building in bannikuppe -kai village in kailancha hobli, ramanagara taluk - mtr-17-stone aggregate(single size)20 mm nominal size, mtr-18-stone aggregate(single size) 10 mm nominal size, mtr-20-white cement based putty at 2sqm/ kg at rs 1050 per kgs, mtr-26-spacers for vitrified tiles, mtr-27-sealer for vitrified tiles, mtr-28-glazed tiles 300x450, mtr-29-border tiles 30 x 10 cms, mtr-30-powder coated 60-70 micron, mtr-31-nylon rollers, mtr-32-rubber beading for shutters beading, mtr-33-pvc beading, mtr-34-alluminium tower bolt - 20 cm, mtr-35-alluminium handles - 15 mm, mtr-36-cleat angles, mtr-37-chrominum plated screws, mtr-38-5.50 mm thick plain glass, mtr-39-enamel metal paint, mtr-40-vitreous china orrisa type w.c. pan size 580 mm, mtr-41-vitreous china flat back wash basin 630x450 mm, mtr-42-15 mm c.p.brass tap, mtr-43-c.p. brass waste 32 mm, mtr-44-c.i. bracket for wash basin and sinks, mtr-45-chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, mtr-46-polyethylene water storage tank with cover and suitable locking arrangemnet, mtr-47-bib cock 20mm nominal bore, mtr-01-broken stone aggregate 20 mm size, mtr-02-broken stone aggregate 12 mm to 10 mm size, mtr-03-coarse sand (zone iii), mtr-04-portland cement 43/53 grade as per reqirment, mtr-05-mixer (concrete) - 1 cum capacity, mtr-06-plasticizer / super plasticizer, mtr-07-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, mtr-08-mixer (concrete small used in culvert), mtr-09-casurina poles 100 - 150 mm, mtr-10-tmt bars fe 500/550 as per reqirment, mtr-11-binding wire, mtr-12-unit cost as per the specification (windows, grils, main door frames, ventilators), mtr-13-honnewood planks for panels 20 mm thick, mtr-14-jungle wood runners and planks, mtr-15-silver oak or equivalent planks 38 mm thick, mtr-16-casurina poles 75 - 100 mm dia, mtr-19-solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm, mtr-21-plastic emulsion paint, mtr-22-water proofing cement paint, mtr-23-vitrified tiles 10 mm thick 600 x 600 mm, mtr-24-adhesive for tiles, mtr-25-grout for vitrified tiles

corporations/Associations/Others

CTN :43461971

13 Jan, 2026 3.03 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in garden of annual part i of sector 44 chandigarh under wdf - providing & fixing of push chair functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting life. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing & fixing of sur board functions: by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel footrest / foot paddle for long lasting life.the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing and fixing of space walker .space walker complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is no.t more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no. less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is no.t less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no. less than 3.0 mm.13 the diameter of rotating shaft is no.t less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge, providing and fixing of seated pedal trainer leg shaper complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high en

corporations/Associations/Others

CTN :43480599

14 Jan, 2026 3.02 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym and pcc benches in parks near house no.2870/2 sector 49-d,chandigarh under mplads. work no.114 18th ls. - push chair odf 001functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mm material: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting lifeprovision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, surf board by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, streel footrest/foot paddle for long lasting life.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, space walker .space walker complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is not less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no less than 3.0 mm.13 the diameter of rotating shaft is not less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. approaches: hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, seated pedal trainer leg shaper complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730

Central Government/Public Sector

CTN :43503896

30 Jan, 2026 NA

Hajipur - Bihar

Tender For supply of open gym sit up board double , open gym surf board double , open gym chest press double , open gym twister triple , opem gym air walker/stroller , open gym shoulder builder/ arm wheel , open gym leg press double

corporations/Associations/Others

CTN :43307160

12 Jan, 2026 NA

Kathlal - Gujarat

Tender For corrigendum : supply of air walker / stroller - outdoor gym equipment (q3) , sit up board - outdoor gym equipment (q3) , surf board - outdoor gym equipment (q3) , twister - outdoor gym equipment (q3) , parallel bar - outdoor gym equipment (q3) , leg press - outdoor gym equipments (q3) , shoulder builder / arm wheel - outdoor gym equipment (q3) , chest press outdoor gym equipments (q3)

CTN :43378411

12 Jan, 2026 NA

Panchkula - Haryana

Tender For bid to ras supply of supply only 10 to 15mm thick italian marble velam grey 380 , supply only floor tiles of sedimento chiaro matt of sixe 1200x800mm , supply only wall tiles staturio eminence of size 1200x1800mm surface lux , supply only essence slate glossy surface lux 1200x1800mm s , supply only capitol grey glossy tiles for wall highlighter , supply only essence slate matt surface floor tiles of size 1200x1800mm , supply only essence beige glozzy surface lux size1200x1800mm , supply only etna brillo glossy wall times of sixe 1200x1800mm , supply only essence beige matt surface quilltouch of sixe 1200x1800 mm , supply only decorative castiron baluster , supply only polished teak wood ist quality , supply only rimless back to wall wc of sixe 360x560x420 mm , supply only table top wash hand basingof size 495x395x150mm , supply only table top wash hand basin of size 700x435x135mm , supply only 250mm brass handles caste type polished bright , supply only butt hinges 125mm size cast brass with hinges pin , supply only 300mm cast brass barrel tower bolts of extruded section , supply only door closer brass extruded section hydraulically , supply only cast brass sliding door bolt 300mm long clip and bolt type , supply only nano quartz composite marble 15mm thick light grey polished , supply only french polished 35mm thick , supply only french polished 35mm thick first class teak wood door , supply only french polished 35mm thick teak wood door with , supply only 12mm thick fixed glass glazing of size 1 point 20x3 mtr , supply only aluminum agnle 50mmx50mmx5mm thick and 100 mm long , supply only cnc cutting 18mm thick wpc jafri fixed with ss screw , supply only apex floor guard 20 ltr , lacquer polish 20 ltr as per samle , sponge for lacquer polish , ce marked cementitious geocomposits , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , ptmt tap fitting (q3) //bid details2 / 29

Surf Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others