Latest surface plate scrap Tenders | Government surface plate scrap Tenders

Central Government/Public Sector

CTN :40025252

15 May, 2025 1.13 Crore

Jaduguda - Jharkhand

Tender For supply of vitrified tiles laid with cement based high polymer , vitrified tiles laid with cement mortar , ceramic glazed wall tiles , grouting the joints of flooring tiles , providing and fixing aluminium work -for shutters of doors, windows , providing and fixing aluminium work- for fixed portion powder coated aluminium , providing and fixing 12 mm thick prelaminated particle board , providing and fixing glazing - with float glass panes of 4.0 mm thickness , providing and laying structural steel work riveted , 24 mm thick factory made pvc door shutters , 35mm thick isi marked flush door , providing and fixing in position collapsible steel shutters , providing and fixing 18mm thick pre-laminated medium density fibre board , providing sal wood work in frames , providing and fixing 15mm normal bore g.i. union , providing and fixing 20mm normal bore g.i. union , providing and fixing white vitreous china pedestal type water closet , providing and fixing water closet squatting pan , providing and fixing wash basin with c.i. brackets , providing and fixing white vitreous china urinal basin , providing and fixing one piece construction white vitreous china squatting plate , providing and fixing 600x450mm bevelled edge mirror , providing and fixing 600x120x5 mm glass shelf , providing and fixing ptmt towel rail complete with brackets , providing and fixing ptmt liquid soap container , providing and fixing 15 mm bided or jet spray , providing and fixing c.p. brass shower rose , providing and fixing c.p. brass stop cock , providing and fixing c.p brass close hole wall mixer tap , providing and fixing 15 mm nominal bore c.p brass angle valve , 75 mmwaste and vent pipes , 100 mm waste and vent pipes , providing and fixing c.p. brass bib cock , demolishing cement concrete , dismantling old plaster or skirting raking out joints , providing and laying plain cement concrete 1 is to 3 is to 6 , providing and laying in position cement concrete of 1 is to 2 is to 4 , providing and laying 1st class brick work with bricks of class designation 75 , half brick masonry with common burnt clay , providing and laying 12 mm thick cement plaster 1 is to 6 , providing and applying two coats of white washing with lime on old work , providing and applying white cement based putty , providing and applying one coat of cement primer , providing and applying wall painting , supplying and laying two or more coats painting with synthetic enamel paint , earth work in excavation in foundation, , providing and fixing centering and shuttering , providing and fixing 18 mm thick granite

Central Government / Public Sector

CTN :39989503

02 May, 2025 NA

Khurda - Odisha

Tender For assessment of strength and structural adequacy of foundation, pier, abutment and substructure elements of (46 nos) bridges to cater the load of psc slabs in replacement of existing plate girder bridge as per rdso standard of 25t loading over the khurda road division.

CTN :40013359

05 May, 2025 10.43 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of pre fabricated store shelter made up of steel structure of size 18.30m x 6.10m x 3.00m clear height up to ceiling level with partition walls , fire extinguisher of capacity 6 kgs along with its accessories confirming to is 13849 two nos with each shelter , lightning conductor will be provided as under and stores are as per appx f , manufactured sand m sand conforming to is 383 1970 specifications for coarse and fine aggregates. , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , bricks common burnt clay building bricks sub class b modular , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f 2 made of 12 mm and 10 mm , form work type 2 timber form work material for columns of size 0.3 x 0.3 x 0.9m , ms clamp made of ms flat 40 x 4 mm 200mm long bent in l shape with two holes , pvc ceiling rose 2 obliq 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor , cable pvc insulated and pvc seathed 1.5 sqmm single core with copper conductor suitable upto 1100 v conforming to is 694 1990 , modular switch one way 6 amps one module conforming to is 3854 1966. , ms screw 20 mm full threaded per pkt 100 nos conforming to is 723 1972 , ms screw 25 mm full threaded per pkt 100 nos conforming to is 723 1972 , tape insulation 2 cm width 10.00mtr long isi marked , mcb single pole 230v ac 50 hz 6 amps 10ka conforming to is 8828 1996 iec 60898 2002 suitable for lighting and other domestic loads. , mcb distribution boards in sheet metal enclosure 4 ways single door with blanks conforming to is 8623, , residual current circuit breaker with overload and short circuit protection double pole 32 amps , modular socket 6a 2 obliq 3 pin combined 2 module , white cover plate with frame 2 module , white cover plate with frame 4 module , metal flush box 2 module , metal flush box 4 module , pvc casing caping pipe 25mm x16mm conforming to is 14927 part ii , pvc casing caping l bend 25mm conforming to is 371 1979 , pvc casing caping elbow 25mm dia conforming to is 9537 part iii 1983 , pvc casing caping t 25mm for conduit pipe , pvc casing caping square box 4 inch x 4 inch , drilling machine bosch gbh 2 26 re sds plus 2 mode rotary hammer drill 800 watts 26mm electrically driven. make bosch. , sieve for sieving fine and coarse agg 900 x 1500mm made of angle iron frame with stand. , aluminum straight edge 50mm square 2mm thick 1800 mm long , wooden flat gurmala , water levelling pipe pvc 100 mtr , hand rivet gun machine , tasla iron 18 , shovel with wooden handle , brick hammer 1.2kgs , cutting plier insulate 6 , screw driver 12 inch with insulated plastic handle , hacksaw frame with 2 blade , drill bit 6mm dia , drill bit 8mm dia , drill bit 10mm dia , hand gloves insulated with rubber , tape measuring metallic 30m , mason trowel karchi , axes picks with wooden handle , fawda with wooden handle , crowbar 5 feet long , rammer with wooden handle of wt 5 10 kg , pipe wrench 12 inch , pipe wrench 18 inch , aluminum spirit level 6 inch , brick line , spanner adjustable 12 inch

CTN :38924592

25 Apr, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

CTN :40005571

28 Apr, 2025 NA

Vapi - Gujarat

Tender For supply, installation, testing and commissioning of electro mechanical works of pumping machinery with associated mechanical and electrical equipments, instruments & accessories etc for different head works of vapi municipal corporation area. - item no.1: submersible type pump setsupply, installation, testing and commissioning of submerged submersible pump sets with suitable for working on three phase, 50 hz3percentage ,415v10percentage ac supply, suitable rpm with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamp, pipe fittings, mechanical seal, bearing bush, strainer, pump sensors and other protection, pump control unit etc. suitable construction of foundation/ installation device with cable length from pumps to panels and of following material of construction:m.o.c :- casing : ci, impeller : ss cf8m, wearing ring and bearing bush : bronze, tc mechanical seal, cs/ss bearing, ss shaft with sleeve, ss strainer and ms motor body fasteners : ss 316l, guide rail : ss 316, lifting chain : ss 316capacity of pump - 833 lpm and 35 m. head (15 kw/ 20 hp) - 1 working + 1 standby. the price should include water in oil sensor and io 113 for mechanical seal and motor protections suitable for each pumps., capacity of pump - 1667 lpm and 35 m. head (18.5 kw/ 25 hp) - 1 working + 1 standby, capacity of pump - 2083 lpm and 35 m. head (22 kw/ 30 hp) - 1 working + 1 standby, capacity of pump - 2500 lpm and 35 m. head (22 kw/ 30 hp) -(only supply of pump set - without installation), capacity of pump - 3333 lpm and 35 m. head (30 kw/ 40 hp) - 1 working + 1 standby, capacity of pump - 5833 lpm and 35 m. head (48.75 kw/ 65 hp) - 1 working + 1 standby, capacity of pump - 8333 lpm and 35 m. head (75 kw/ 100 hp) - 1 working + 1 standby, capacity of pump - 7333 lpm and 45 m. head (82.5 kw/ 110 hp) - 1 working + 1 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp) - 1 working + 0 standby, capacity of pump - 11111 lpm and 35 m. head (90 kw/ 120 hp (only supply of pump set - without installation), capacity of pump - 14286 lpm and 35 m. head (110 kw/ 150 hp) - 1 working + 1 standby, capacity of pump - 16667 lpm and 35 m. head (132 kw/ 180 hp) - 2 working + 1 standby, capacity of pump - 25000 lpm and 26 m. head (150 kw/ 200 hp) - 1 working + 1 standby, item no.2: submersible non-clog vertical pumpsupply, installation, testing and commissioning of sewage submersible, non clog type suitable for working on three phase, 50 hz 3percentage , 415 v 10percentage , ac supply, 1450 rpm synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set and following m.o.c: casing: ci, impeller: ss cf8m, wearing ring and bearing bush: bronze, tc mechanical seal, cs / ss bearing, ss shaft with sleeve, ss strainer and ms motor body.capacity of pump - 15 kw/ 20 hp - 2 working the price should include water in oil sensor and io 113 for mechanical seal and motor protections., item no.3: manufacture, supply, lowering, laying, jointing, welding and delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having bevelled ends plate or coil conforming to is-3589-2001 or its latest revision/ amendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete charwada 2 - jalaram mandir - 219.1 mm dia. (4.5 mm thick)- delivery pipe, balitha 1 - near kabrsthan - 273 mm dia. (5 mm thick)- delivery pipebalitha 2 - bhandarwada - 273 mm dia. (5 mm thick)- delivery pipechhiri 1 vallabh nagar - 273 mm dia. (5 mm thick)- delivery pipe, dungra - azad nagar - 323.9 mm dia. (5.6 mm thick)- delivery pipe vapi - naikwad tanki - 323.9 mm dia.

Corporations And Associations And Others

CTN :39938885

15 Apr, 2025 60.4 Thousand

Panchkula - Haryana

Tender For providing new foundation to existing 12.5 mtr. high mast in ngm at market committee, ambala cantt along with new foundation bolts and 2 nos. g.i. plate earthing.

Central Government And Public Sector

CTN :38934831

19 Apr, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of - motor point machine for railway yard trs- motor point machine for railway yard trs description of materials and execution for installation, wiring & testing to operate the point machine at nalco rly yard as per eco.railway sepcfification. 1. supply of electric point operating machine 143mm non trailable to operate on 110v dc complete with lock detector, point junction box along with telescopic pipe and slides for lock and detector- rotary locking. universal type as per specification no: irs/s/24/2002 with latest amendment and drg. no.: rdso/s: 10800 (foc motor) along with standard tool kit set for every 4 point machines. (1no.) 2. supply of ground connection set complete suitable for rotary locking type irs electric point machine as per drg. no. s-3262 for 60kg rail with insulating materials with insulation materials. (1 set) 3. supply of junction boxes with covers and terminal plates 24/30 way to suit drg. no. 236967/1 (as amended up to date) and irs: s-10/78. this includes supply of pbt terminal. (1 nso.) 4. transportation, installation of point machine on ms plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, "d" bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. preliminary adjustment for operation of points by crank handle oiling, greasing, painting and lettering as required. this also includes supply and fixing telescopic arrangement using gi pipes of required dia for provision of wires from junction box to point machine.(1 no.) 5. wiring and testing of electric point machine as per the wiring diagram supplied by the railway. this also includes the connection of electric point machine and fixing of insulation materials and providing two numbers of seven lever ( 7 lever) goderj locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of e type lock ( if required).(1nos.) 6. supply of steel apparatus case large size as per drg. no.- con/sk/1/186/ and spec no irs:s-10/78 (adv) with latest amend. with "e" type lock & key of ward no.-32 with handle. (1 nos.) 7. transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (full) with fixing of e-type lock, wiring, cable entry, termination, clamping filling cable pit with sand, painting and lettering etc., as per drg no. s & t/con/sk/16. this included earth work and/or masonry work required for securing the apparatus case as per site condition including supply of all required materials wire coils 6 way terminal pbt hylam sheet, wooden plank etc. (1 no.) 8. pvc insulated amoured, unscreened, underground railway signaling cable as per specification no. irs:s63/2014(rev.4.0) 12/core (250 mtrs) 9. excavation of trenches of depth 1.0m including clearing of roots and trees etc. for all types of soil. this work also including covering of cables laid in trench and backfilling, ranning and consolidation of soil as well as disposal of extra soil after cable is laid as specified in guidelines on signaling cable laying given by rdso and any latest circular.(100 mrtrs) 10. track crossing by horizontal boring method as per technical specification of manual as per feasibility of site condition including supply of dwc pipe or hdpe pipes. (18 mrts) 11. laying of signaling cable/power cable to extend the power of all sizes in excavated trench, etc. (0.5 km) 12. supply, transportation, installation, testing and commissioning of earth electrode, construction of cement enclosure to drg. no. con/sk/t/9a and drawl of 6 swg wire or 2 nos. of 8 swg wires from each electrode to place advised by the site engineer including fixing and soldering of lugs and measuring, painting of the earth resistance etc. (1 nos.) 13. supply of smr ower panel (minl ips) having smr module03 nos., dca card01, dc-dc convertor

Central Government/Public Sector

CTN :39946442

28 Apr, 2025 81.88 Lacs

Ganjam - Odisha

Tender For supply of spares for ball mill under pac - ring gear set , ring gear bolts , grate bolt type-1 , grate bolt type-2 , head plate fitting bolt with washer type-1 , head plate fitting bolt with washer type-2 , ball mill liner bolts , ball mill liners casting td- 32 , ball mill liners casting td- 33 , pinion assembly along with all accessories , grinding media 20 mm size- 3mts , grinding media 25 mm size- 6mts , grinding media 30 mm size- 6mts , grinding media foundation bolts type-1 , grinding media foundation bolts type-2 , grinding media foundation bolts type-3

Central Government/Public Sector

CTN :39130240

21 Apr, 2025 NA

Goa - Goa

Tender For corrigendum : supply of fasteners fittings for weapon cabinet and helo traversing system - draw bar , folding platform , small folding platform , magazine , support , ear , cradle , bolt-eye , barrel , knee , axle , shackle , rail , welded stud , plate , spring holder , type 1 removable ladder , type 2 removable ladder , foundation for the gear ao-18p for ak-630m gm , spring , clamp , portable two-step bench , shelf , gasket , bracket , eye bolt m20 , deck socket , mooring ring , grounding jack for helicopter , bolt eye , pocket , eye , support

State Government

CTN :39914085

19 Apr, 2025 NA

Multi City - Gujarat

Tender For annual unit rate (rate contract) for the items of works for various works in dang district - providing and supplying sadad wood of 3 " planks for shuttur of opening of check dam gate approved quality of sadad wood as per approved design and plan etc. complete., fixing of existing steel gate in grooves in opening of checkdam, checkdam cum causway or sorage tank., fixing of wooden planks in grooves & filling selected earth in between two shutters coverd by approved plastics in opening of checkdam including carting and consolidate etc. complete., providing & laying empty cement bags filling with good selected earth including stiching & laying as and where required., removel of wooden planks from opening of checkdam including carting etc. complete., excavation for foundation in all sorts of soil including yellow, sandy, gravelly soil, soft & hard murrum, etc. dry condition including depositing the excavated stuff in uniform layers in banks or as directed etc. complete for lead uo to 1.0 km and all lifts. (by machinery) (a) above water table., excavation for foundation in soft rock including depositing the excavated stuff as and where directed etc.complete for lead upto 1.0 km and all lifts.(by machinary), excavation for foundation in hard rock including blasting and chiseling if necessary sorting out and stacking seperately the usable rubble, depositing the excavated stuff as and where directed including back filing trenches with suitable excavated stuff etc. complete for lead upto 1.0 km. and all lifts.(by machinary), back fiing the foundation trenches around the structures etc. with selected excavated stuff including watering, ramming, compacting etc. complete.(by machinary), deepening of tank in all type of soil with yellow, sandy, gravelly soil including wet and slushy condition of soil including soft murrum &hard murrum by machinery including conveying and spreading excavated stuffas & where directed with lead up to 0.50 km and all lift etc. complete., drilling holes of 35 mm dia.vertical or inclined in all formation soft rock/concrete upto required depth including washing with air & water at required pressure for following stage of depth. (a) for 0.00 to 10.0 meter depth., providing and placing in position reinforcement bars including cutting, bending welding, joints where necessary, hooking etc.complete as per drawing for all lead and lifts., filling in foundation with concrete of cement, sand and metal (up to5 cm size) in following proportion including centering, shuttering, temping, smooth finishing, curing etc.complete as directed for all leads and lifts.(manually with conventional mixer) (iii)1:3:6, (iv)1:2:4, providing and laying plain/reinforced cement concrete of cement, sand and metal (20mmto 25mmsize) in following proportion laid in situ including centering, shuttering, temping, smooth finishing,curing etc.complete as directed for all leads and lifts (manually with conventional mixer) (iii)1:3:6, (iv)1:2:4, providing and fixing inposition 110mmdia pvc pipe weep holes in abutment, wingwall, and laying training etc. complete., dismentalling the existing stone masonry including sorting out and stacking the useful materials and removing the debries and making good the damage etc. complete as directed. (b) in cement mortar, dismentalling the existing brick masonry including sorting out and stacking the useful materials and removing the debries and making good the damage etc. complete as directed.(b) in cement mortar, dismentalling the existing foundation concrete including disposing the dismentalled stuff including sorting out and stacking the useful materials and removing the debries and making good the damage etc. complete as directed (b) in cement mortar, ( c ) r.c.c for super structure., providing & fixing in position sign board of standard size of 1.20m x 0.90 m with m.sangle 40mm x 40mm x 6mm with 3mm thick iron plate including fixing in 1:5:10 prop. concrete block size 40cm x40cm x

Surface Plate Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Corporations And Associations And Others

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government