Get complete information related to latest Surge Protection Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Surge Protection Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Surge Protection Tenders.
Tender For supplying installation testing and commissioning of laundry equipment in ashadeep narela delhi - supplying installation testing and commissioning of laundry equipment in ashadeep narela delhi - sitc of front loading washing machine with loading capacity of 30 kg dry weight per charge heavy duty , electrically heater inner basket & outer drum stainless steel, micro countroller base cyclic timer for auto- reserve, auto- timer & auto digital temperature control, water- inlet valve drain valve complete with control panel, & electric motor for wash, driver through pulleys & v- belts and control panel operator on 3ph, 415 v, 50 hz, a.c. supply operation cycle 30 to 40 mintutes complete connection etc as required, sitc of hydro extractor machine direct- driver self- balance with automatic electromangnetic dc injection brake system having capaciy of 30 kg per charge with auto -timed top loading vibration less innner basket and outer drum stainless steel complete with specially designed electric motor and control panel operator on 415 v,3 phase , 50 hz ac supply . operation cycle 5 to 10 mintes complete connection etc as required., sitc of drying tumbler machine front loading open pocket, electrically heater with loading capacity of 30 kg . per charge complete with micro controller base cyclic timer for auto timed & auto - reserver, auto digital temperature control, fitted with control panel , one motor each for driver and blower double walled glass wool insulated outer body mild steel with inner basket stainless steel, self lint screen , v belt driver waster air exhaust etc operates on 415 v, phase 50 hz ac supply . operation cycle 40 to 60 mintes complete connection etc as reqd, supplying and drawing following sizes of frls/hffr pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.a) 3 x 4 sq. mm, b) 6 x 4 sq. mm, supplying and fixing of following capacity, 240/415 volts, 10ka/15ka c series mcbs suitable for lighting and other loads of following poles in the existing mcb db complete with connection, testing and commissioning etc as reqd.a) 40a, 10 ka , fp mcb (415v), b) 63a, 10 ka , fp mcb (415v), supplying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size complete as required.a) 4x 16 sqmm, b) 4x 25 sqmm, supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency >85%, operating voltage ac 140- 270 volt, frequency 50/60 hz, operating temp range -5 c to 40 c, internal surgeprotection of 2.5 kv with short & open circuit protection, thd 10%, p. f. 0.95, ip20, cri >80, flicker free, (flicker shouldbe below 5 %), life time (led, driver & electrical circuitry), of minimum 50000 burning hours with 70% of initial lumen maintained till life ends, cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin), sdcm(standard deviation colour matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard. manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 120 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body (thickness > 1.20 mm)a) 40 watt, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in th
Tender For supply of ip based cctv surveillance system and dedicated fiber optic network backbone connectivity d d -four mp fixed bullet camera with forty mtr , four mp anpr camera with thirty mtr ir , four mp wdr thirty two x ir network ptz camera one hundred eighty mtr , thirty two ch four k nvr , ten tb surveillance hdd , supply and installation of twenty four port layer two and switch with ten giga uplink , supply of ten port l two managed switch incl eight nos of gigabit poe and ports and two nos combo , one g single mode transceivers , two kva li ups with built in batteries , six hundred va ups with built in batteries , cat six twenty three awg solid bare copper conductor uutp unshielded hdpe insulation armoured cable , twenty four core single mode armoured fiber cable , six core single mode armoured fiber cable , fiber patch cord sm , twelve port rack mounted liu with single mode lc upc pigtail and coupler , outdoor enclosure , six u rack , three core copper armoured cable , rj forty five connector , termination junction box , angle for fixing ptz camera , customized gi camera box with gi bracket , spd for lighting or power surgeprotection , electrification including electric wire switch or socket and related accessory , cat six cable laying charges , overhead fiber optic cable laying charge with gi wire , termination and splicing charges of fibre optic cable , supply installation testing and commissioning
Tender For supply of repair and maintenace job at automatic weather station and hydrogen sensor at hydrogen shed -thermistor probe renewal and calibration , hygristor rh module renewal and calibration , ultrasonic wind sensor transducer board renewal , barograph pressure sensor cartridge renewal , rain gauge reed switch and bearing renewal , data logger ic board and surgeprotection renewal , battery pack and charge controller renewal , solar panel junction and connector renewal , hydrogen gas detector sensing head renewal , onsite diagonistics and integrated testing ls
Tender For supply of 5 kva online ups , battery bank for ups 26ah 12v , ats switch for ups , battery bank rack for ups batteries , class c or type ii single phase surgeprotection device , float cum boost charger 24 volt 30 ampere , battery bank for vhf radios 150 ah 12v , battery bank rack for vhf radios , ac power cable , 16 a socket , modular board , 16 a switch , mcb , pvc pipe for laying power ac cable along with wall clamps , miscellaneous item , supply installation testing and commissioning of item 1 to 15 above and training
Tender For supply of electrical materials for day to day maintenance of ei at balak ram hospital. - supply of 6- 32 amps rating, sp mcb, c curve, 10 ka breaking capacity., supply of 6- 32 amps rating, dp mcb, c curve, 10 ka breaking capacity., supply of 40 amp, 2 pole isolator ., supply of 63 amp, 2 pole isolator ., supply of 63 amp, 4 pole isolator ., supply of 100 amp, 4 pole isolator ., supply of 40 amp rating 2 pole rccb, 30 ma ., supply of 63 amp rating, 4 pole rccb, 30ma ., supply of 20 a, spn, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure., supply of 25 mm dia isi marked, pvc conduit, supply of pvc batten / angle holder., supply of 2+6 way, spn, single door, mcb db, supply of 2+2 way, spn, single door, mcb db, supply of 4 way (4 + 12), tpn, mcb db, double door horizontal type., supply of 6 way (4 + 18), tpn, mcb db, double door horizontal type., supplying of led recessed/surface down lighter (round /square/ rectangular) smd type of following body material with pmma and prismatic diffuser and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range - 15 deg to 40 deg centigrade, internal surgeprotection of 2.5 kv with short & open circuit protection ,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), life time of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report, cct 3000 k / 4000 k / 5700 k / 6000 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 105 and 120 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90 c). powder coated die cast /extruded aluminium body including trim with aluminium reflector. 12 -15 watt, supplying of panel light 2x2 ft., of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency >85%, operating voltage ac 140-270 volt, freq 50/60 hz, operating temp range -15 deg to 40 deg centigrade, internal surgeprotection of 2.5 kv with short & open circuit protection,thd 10% , p. f. 0.95, ip20, cri >80, ugr (unified glare rating) 19, flicker free, (flicker should be below 5 %), life time (led,driver & electrical circuitary), of minimum 50000 burning hours with , 70% of initial lumen maintained till life ends ,cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin), sdcm(standard deviation color matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard and trade mark certificate (t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required withminimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by eng
Tender For a/r & m/o residential and non residential buildings of lhmc & ah new delhi during 2025-26.(sh supply, installation, testing and commissioning of surgeprotection device at oncology block).
Tender For corrigendum : supply, testing and commissioning of smps based integrated power supply (mini ips) systemfor lc gate in re area with 200ah vrla battery (55+5 cells) as per rdso specification no.rdso/spn/165/2023 ,version 4.0 or with latest amendment/specification complete set with surgeprotection devices( in separate wall mountable spd box), status minitoring panel , cable for connecting ips to battery bank, tool kit, all spares as per rdso specification, all optional modules , user instruction manual, etc and commissioning of ips system at lc gate in accordance with rdso letter no. sts/e/ips/genl. dated.03.04.2008 or latest.[ warranty period: 30 months after the date of delivery ]