Web Analytics Made Easy - StatCounter

Surge Suppresor Tenders

Get complete information related to latest Surge Suppresor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Surge Suppresor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Surge Suppresor Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :41396066 Due date: 01 Sep, 202501 Sep, 2025 NA
Tender For tender for supply of retrofit kit-1 , switch , disconnect , carrier , legend , controller , programmed , screw , cap , 3/8-16 unc x 7/8 , ss , clamp , tube , 1 in. od tube , locknut , conduit , 3/4 in. nps , transient suppressor , manual starter , protector , manual starter , protector , elbow , ss , 90 deg , 1/4 npt , bushing , conduit , 3/4 in. nps , locknut , conduit , 1/2 in. nps , switch , selector , 3-position , bushing , 3/4 spig. x 1/2 fnpt , connector , conduit , gasket , liquid tite , 1/2 in. , elbow , entrance , 1/2 in. conduit , tee , pvc , 1 in socket , orca iia-165 , tee , pvc , 2 in socket , elbow , pvc , 90 deg , 2 in socket , coupling (red.) , pvc , sch. 80 1 in soc x 3/4 in soc , connector , cord grip , 1/2 in. mpt , 1/4 in.-3/8 in. cable , connector , cord grip , 1/2 in. mpt 3/8 in -1/2 in. cable , connector , cord grip , 3/4 in. mpt , 1/2 in.-5/8 in. cable , connector , 90 deg. , 1/2 in. mpt , 1/4 in.-3/8 in. cable , connector , 90 deg. , 3/4 in. mpt , 1/2 in.-5/8 in. cable , bushing reducer 1-2 mnpt x 1-4 fnpt , toe , 1 in pvc , 2.25 in lg , orca 11a-165 , toe , 1 in pvc , 4 in lg , contact , auxiliary , contactor , clutch , door , light , pilot , white , breaker , circuit , terminal block , gray , 4-conductor , terminal block , green-yellow , ground , controller , programmed , coupling , pipe , screw , cap , hex hd , ss , m6 x 1.00 x 25 mm lg , plug , 1 npt , elbow , 90 deg , 1npt , washer , lock , ss , 3/8 in. size , nipple , galv. , 2 p x 2 in lg , clamp , worm drive , 1-9/16 to 2-1/2 in dia , plug galv iron sq head solid 3-4 in ips-npt thd s , bushing , galv.hex.pipe npt 2 in x 1 1/2 in ips , ss vacuum toilet evac 910 stainless steel model , toiltet evac 910 floor trevi

State Government

CTN :41447062 Due date: 04 Sep, 202504 Sep, 2025 NA
Tender For supply of various specific nature fitment type electrical and electronics items f f - conventional manual call point , moisture protection relay, wlc , rccb with 25a and 100ma sensitivity,dp , power contactor, type mo 110, make l , power contactor, type mo 70, make l , power contactor, type mo 50, make l , power contactor, type mo 40, make l , power contactor, type mo 18, make l , power contactor, type mo 25, make l , power contactor, type mo 12, make l , add on contact block, 2no 2nc,model mo , add on contact block, 3no plus 1nc, model m , add on contact block, 1no plus 1nc, model m , thermal overload relay, 35 45a, model , thermal overload relay, 8.5 12.5a, model , thermal overload relay, 6.7 9.7a, model , on delay timer, 2a6dt6 , make gic , vmr, model mg73bh, d2vct1,make gic m , 2 plus 1 combined switch socket box, 6a,240v , one way switch, model 11739, item code w , shuttered socket, model no. cml 8524793 , one way switch, 16a, tem code w26411a, 2 , shuttered socket ,item code w26424, 5 pi , industrial socket complete set , 5 pin , fan regulator, 6a, 220 240v, model ker, , pressure gauge, 0 16 kg sqcm, model no , pressure differential switch, make dan , sequential controller, make make ene , water level sensor, ss pin, ss pin injec , uvr, te 210, make taknika , uvr, te 212, make taknika , pccm display for generator, model hmi2 , push button, red , push button, green , auto manual selector switch, make sal , copper thimble,2.5 sqmm , multifunction energy meters, wl 4400, ma , main door switch, make kaycee , cooling fan 8 inch for panel , dc power pack, make maha mai engineers , mpcb 02 10 amp, gv2 p14 , mpcb 1a, gv2 l , mpcb 4 6.3 amp, gv2 p10 , winding temperature relay, s2wtr1, make , mccb 100 amp range 40 100 amps, 3 pole, , vmr, model mg73bh, d2 vmr2,make gic , power contactor 25 amps, lc1e25, make sc , ammeter, dm1110 1ph, make scheider, , voltmeter, dm1210 1ph, make scheider , rotary switch , make scheider , local remote position switch, make kay , ac current transducer, make mecco , sppr relay, vsp d2 model, minilec make , star delta timer, contact 5a, gic make //bid details 2 / 45

Central Government/Public Sector

CTN :41507329 Due date: 27 Aug, 202527 Aug, 2025 NA
Tender For supply of electronic components - "glof controller cardbattery holder coin 12.5mm smdmfr p/n : 1056", "cap cer 1uf 25v x7r 0805mfr p/n : kgm21ar71e105kl", "cap tant 1uf 10% 16v 1206mfr p/n :taja105k016hnj", "cap cer 0.1uf 25v x7r 0805mfr p/n : kgm21nr71e104kt", "cap cer 10000pf 6.3v x7r 0805mfr p/n : 08056c103jaz2a", "cap cer 3pf 50v c0g/npo 0603mfr p/n :cc0603crnpo9bn3r0", "cap cer 2.2uf 16v x7r 1206mfr p/n :cc1206kkx7r7bb225", "cap cer 8.2pf 50v c0g/npo 0603mfr p/n : cc0603crnpo9bn8r2", "cap cer 10uf 16v x7r 0805mfr p/n :emk212bb7106kg-t", "cap tant 4.7uf 10% 16v 1411mfr p/n : t491t475k016at", "cap cer 0.1uf 10v x7r 080mfr p/n : 0805zc104k4t2a", "cap cer 10pf 10v x7r 060mfr p/n :c0603c100k8racauto", "cap cer 10uf 25v x7r 1206mfr p/n :grm31cr71e106ka12l", "cap cer 0.22uf 25v x7r 0603mfr p/n : grm188r71e224ka88d", "cap cer 22uf 10v x7r 1206mfr p/n :grm31cr71a226ke15l", "cap cer 1uf 6.3v x5r 0603mfr p/n : grm188r60j105ka01d", "cap alum poly 27uf 20% 25v smdmfr p/n : svpf27mx", "cap cer 0.22uf 16v x7r 0805mfr p/n :vj0805y224kxjmt", "orange 605nm led indication -discrete 1.9v 0805mfr p/n :hsml-c170", "led yellow clear 0805 smdmfr p/n : sm0805yc", "red led indication - discrete 2v 0805mfr p/n :sml-lx0805drc-tr", "2.0x1.2mm green smd ledmfr p/n : ap2012sgd3", "ferrite bead 600 ohm 0603 1lmfr p/n : fcm1608kf-601t03", "ic flash 256mbit spi 133mhz 16smfr p/n mt25ql256aba8esf-0sit", "8-channel, 50ksps to 200ksps, 12mfr p/n :adc1283ipt", "pressure sensor 4.35psi ~ 18.13pmfr p/n :bmp390", "44 position din connector receptacle,female sockets gold through holemfr p/n : pcn10c-44s-2.54ds(72", "connector header through hole 8 positionmfr p/n : 533750810", "conn header smd 10pos 1.27mmmfr p/n :ftsh-105-01-l-dv-k-tr", "conn micro sd card r/a smdmfr p/n :mem2075-00-140-01-a", "conn header through hole 2pos 4.2mmmfr p/n : 1726480102", "connector header through hole 2 position 2.54mmmfr p/n :901361302", "fixed ind 220nh 2.4a 32.4mohm sm 1210mfr p/n : nlcv32t-r22m-pfr", "1 µh shielded molded inductor 9.6 a 14.6mohm max 1616mfr p/n : xel4020-102mec", "thick film resistors o ohms-smd rca0805mfr p/n rca08050000zsec", "res 10k ohm 0.5% 1/10w 0805mfr p/n :erj-6rbd103v", "res smd 47k ohm 0.5% 1/4w 0805mfr p/n : erj-pb6d4702v", "thick film resistors - smd 33.2ohms1% 100ppmmfr p/n :rca080533r2fkea", "res 100 ohm 5% 1/8w 0805mfr p/n erj-s06j101v", "res 301 ohm 0.1% 0.26w 0805mfr p/n :tnpw0805301rbeea", "thick film resistors o ohms-smd rca0805mfr p/n :rca08050000zsec", "res smd 510 ohm 5% 1/8w 0805mfr p/n : ktr10ezpj511", "res smd 100k ohm 1% 1/8w 0805mfr p/n : chv0805-fx-1003elf", "res 10k ohm 0.5% 1/10w 0805mfr p/n erj-6rbd103v", "thick film resistors o ohms-smd rca0805mfr p/n :rca08050000zsec", "res smd 330 ohm 0.5% 1/2w 0805mfr p/n : erj-p06d3300v", "res smd 220 kohm 0.5% 1/2w 0805mfr p/n erj-p06d2203v", "res smd 510 ohm 5% 1/8w 0805mfr p/n : ktr10ezpj511", "res smd 100k ohm 1% 1/8w 0805mfr p/n : chv0805-fx-1003elf", "res 0.1 ohm 1% 1/10w 0603mfr p/n erj3rsfr10v", "res smd 1k ohm 0.1% 1/8w 0805mfr p/n :crt0805-by-1001elf", "43.2 kohms ±1% 0.25w, 1/4w chip resistor 0805mfr p/n :crm0805-fx-4322elf", "res smd 100k ohm 1% 1/8w 0805mfr p/n : chv0805-fx-1003elf", "res 4.7k ohm 5% 1/8w 0805mfr p/n :erj-s06j472v", "switch spst-no top actuated surface mountmfr p/n skrkaee020", "board mount temperature sensorsmfr p/n :tsys01", "ic mcu 32bit 2mb flash 144lqfpmfr p/n : stm32f469zit6", "ic reg buck 3.3v 4a 14vqfnmfr p/n: lmq62440bppqrjrrq1", "sensor mr i2c/spi 12lgamfr p/n : lis2mdltr", "ic switch spdt x 1 10ohm 6tssopmfr p/n : 74lvc1g3157gw,125", "accelerometer, gyroscope, temperature, 6 axis sensor i2c, spi outputmfr p/n:ism330dlctr", "crystals crystal 32.768khz 12.5pf smdmfr p/n :nx3215sa-32768k-std-mua-8", "crystals crystal 8mhz 8pf smdmfr p/n :nx3225gd-8mhz-std-cra-3", "44 position din connector header, male pins gold through holemfr p/n :pcn10-44p-2.54dsa(72)", "44 position din connector receptacle, female sockets gold through holemfr p/n : pcn13-44s-2.54dsa(7

Central Government/Public Sector

CTN :41507722 Due date: 10 Sep, 202510 Sep, 2025 4.22 Lacs
Tender For defect rectification on various electrical and hull defects onboard icgs c-445 - h-215: 04 in nos partition to be provided in computer rack for storage of file and books. in way jobs include;-(a) relocation of television.(b) 04 nos partitions in ss rack., h-212:08 nos ladder steps in main alleyway ladder found cracked and worn out. steps to be renewed with anti-slip grips as per sample. nut bolts of steps to be renewed.qty -08 nos, material-al., h-217: 01 in no sofa for sitting arrangement in wardroom to be fabricated and fitted. job include:(i) fabrication of 01 in no sofa as per sample.(ii) fitment of sofa in position.(iii) removal and fitment of existing fitting racks.(iv) fabrication of sofa covers. (v) rearrange of dining table. sofa size- 2500 x 500 x 350 mm, l-077: base plate, rotary volume switch socket and junction box of 02 in nos main broadcast system speakers at bridge top and quarterdeck deteriorated due to weathering. mb speakers to be disconnected from junction box and fabrication of base plate, socket and junction box to be carried out, connectorisation of speakers to be done and mb system to be proved for satisfactory operation. specifications of base plate, rotary switch and junction box are as follows:- (a) base plate- 24cmx14cmx10cm, mat-ms is- 513, powder coated.(b) junction box- 9.5cmx8.5cmx6.5cm, mat- ms is-513, powder coated.(c) rotary volume switch-1 pole, 5 way, h-216: chalk test of main engine ventilation flap air tight door observed suboptimal. minor crack and pitting observed on aluminium flap and frame. defect to be rectified by renewal of ventilation flap including cutting and metal buildup of frame. chalk test to be proved. in way jobs includes removal, fitment, machining, welding of door and frame. door size-(1000 x 2000 mm). ventilation door -01 no, mat - al., h-218: aluminum rack for storage in waterjet compartment to be fabricated as per sample. material-aluminum. size- (l x b x h) (3ft x 2ft x 1ft)., h-219: storage box to be fabricated for storage of machinery spares in waterjet compartment (mat- al, qty - 01 no, size - 100 cm x 50 cm x 50 cm)., 01 in no ba controller board to be fabricated as per sample. material : wood/ sunmica.

corporations/Associations/Others

CTN :41500550 Due date: 22 Aug, 202522 Aug, 2025 NA
Tender For auction sale of paper rf45 star micro,ribbon sf 01b star printer micro,epromz-80 bridge,ups pcb,pcb assy for target i/o,assy position sensing,pcb assy z-80 bridge,pcb assy weapon interface,drive hand 52 lps,elevator motor assy,bolt assy rifle l1a1 weapon,bolt assy machine gun l2a2,inter connect cable ac card,pcb i/o,recoil rod,assy printer,video monitor assy,tube light modification kit,assy recoil motor,pcb motor drive,pcb assy audio control,pcb ac control assy,pcb assy ram hd controller,assy sensor l1a1,motor d2 hnrxe inf ns-00,power supply e155 4805 ac on acdcconvert,assy recoil clutch,assy sensor cable,assy drive id ler left,assy drive id ler right,assy target carriage left,assy target carriage right,pcb cpu (sats-bhel-701-5100),diode in 4148 75v a3,emi box assy printer mk-2,transformer assy,pcb main printer cjle 61-5903 6p-890,pcb assy pak b-03,pcb pak 1-02 head indicator,pcb assy logic apb 08-08

CTN :41208871 Due date: 23 Aug, 202523 Aug, 2025 NA
Tender For corrigendum : supply of controller unit assy , part no z6 arj 1750 004 262 82, mtrl no 10446250, regd srl no 56 , controller unit assy , part no z6 arj 1750 004 262 82, mtrl no 10446250, regd srl no 26 , fire control box , part no z6 arj 1750 002 401 39, mtrl no 10434194, regd srl no 79 , loaders fire safety switch , part no z6 arj 175000240527, mtrl no 10439519, regd srl no 35 , loaders fire safety switch , part no z6 arj 175000240527, mtrl no 10439519, regd srl no 69 , loaders fire safety switch , part no z6 arj 175000240527, mtrl no 10439519, regd srl no 83 , turret position indicator , part no z6 arj 1750 002 403 33, mtrl no 10440371, regd srl no 64

CTN :41315576 Due date: 21 Aug, 202521 Aug, 2025 NA
Tender For corrigendum : supply of ac filter , sensor assy cam position , thermostate valve , wiper blade , relay 24v , relay 12v , ecm controller

State Government

CTN :41333626 Due date: 29 Aug, 202529 Aug, 2025 2.18 Crore
Tender For corrigendum : purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen

Central Government/Public Sector

CTN :41323798 Due date: 08 Sep, 202508 Sep, 2025 NA
Tender For power contactor 110 amp. 4 pole 415 v ac coil voltage 380-415 v ac 50 hz wit h 2 nc aux contact along with surge suppresor as per s.no.59 & item no. k-08, place of in stallation s1k43 of bill of material of rdso spec no. rdso/pe/spec/ac/0184-2015(rev.0), us ed for main contactor for local main supply of lhb type ac coaches , confirming to rds o spec. no. rdso/pe/spec/ac/0184-2015(rev.0) suitable for lhb type ac coaches switch boar d cabinet.(s1k-43) spec:rdso/pe/spec/ac/0184-2015(rev.0) of makes m/s abb, m/s schneider, m/s s iemens, m/s l&t and c&s. [ warranty period: 30 months after the date of delivery ]

CTN :41290839 Due date: 12 Aug, 202512 Aug, 2025 NA
Tender For supply of sensor throttle position , controller assy epi ecm , sensor map , sensor assy cam position , crank shaft oil seal guide , sensor water temparature , assy of fuel filter , filter element , element oil filter , front hub nut lock , rear hub nut lock , hub seal rear , filter assy shorter
 Loading, Please wait...

Connect us via What's Up