Latest suspension bolt Tenders | Government suspension bolt Tenders

corporations/Associations/Others

CTN :41794800

23 Sep, 2025 NA

Mehsana - Gujarat

Tender For annual rate contract for supply of electrical goods for street light and other electrical work in visnagar nagarpalika - supplying of double walled corrugated pipes (dwc) of polyethylene (conforming to is 14930 ii )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable ((a)50 mm outer dia, supplying of xlpe (is:7098) (i)-88 isi armoured cable multistrand / solid aluminium conductor for 1.1 kv. to be laid on wall with necessary clampsor in existing trench / pipe of following size of cables (c) 4 core 10 sq. mm, supplying of xlpe(is:7098) (i)-88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size.(a) 2 core 2.5 sq. mm, supplying of xlpe(is:7098) (i)-88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. (b) 2 core 4 sq. mm, supplying of flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. (e) 1.50 sq.mm 3 core round pvc sheathed, supplying of flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. (h) 2.50 sq.mm 3 core round pvc sheathed, supplying single phase ccms, supplying three phase ccms, repairing of single phase ccms, repairing of three phase ccms, supplying approved make smc press moulded composite frp. loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip 5way(3pplusnpluse),din rail for mounting mob and hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts and washers suitable for erection on pole with cable clampsand earth bolt of following size of box.(b) 250mm x 200mm x 100mm [deep], supplying approved make digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme, suitable to operate on 240v plus 5., 16a with, floating contacts minimum switching setup time 1 minimum and lcd display. also comprised permanent on/off switching. programming switches and housed in fire proof thermoplastic enclosure and transparent cover erected as required with necessary connection erected as directed., supplying electrical insulation l.t. tape role with isi marked having nominal width 1.8 cms nominal length 8.0 mtr nominal thickness 0.125 mm and having self adhesive pvc, plyer 8" (taparia), tester (taparia), screw driver 12" (taparia), safety gloves 11kv, safety shoes, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (a) for 25 / 32 a rating, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (c) for 60 / 70 a rating, supplying ac-3 duty 3 pole power contactor with 2 no and 2 nc auxcontacts complete with 415v/220v operating coil suitable for (landt, bch,t.c., siemens, cands make). (e) for 110 a rating, supplying miniature circuit breaker single pole 6a to 25a suitable to operate on 240 v a.c. system and having breaking capacity 10 ka to be erected in existing box. confirming to is 8828/1996 with isi mark cat.iii, supplying 240 v mcb double pole switch for lighting load (b curve) having 10 ka breaking capacity and confirms to is : 8828 in existing box having following capacity (a) 6 to 32 amp.cat.iii, supplying 240 v mcb double pole switch for lighting load (b curve) having 10 ka breaking capacity and confirms to is : 8828 in existing box having following capacity (b) 40 amp. cat.iii, supplying 415v mcb four pole switch for lighting load (b curve) having 10ka breaking capacity and confirms to is :8828 in existing box having following capacity (a) 6 to 32 amp. cat.iii, supplying 415v mcb four pole switch for lighting load (b curve) having 10ka breakin

Corporations And Associations And Others

CTN :41810886

17 Sep, 2025 NA

Delhi - Delhi

Tender For supply of sanitary item/ plumbing material for day to day maintenance of pt/ct in ac-57 and ac-58 for mega swachhata abhiyan in delhi under the jurisdiction of ee(m)-iv/ssz - laying and jointing pvc pipe. heading, supplying of ptmt urinal cock 15mm dia at mcd store, supplying of ptmt bib cock with nozzel 15mm at mcd store., supplying of ptmt stop cock (concealed) 15mm at mcd store., supplying of 15mm nominal bore and 30 cm length p.v.c. connection pipe with with ptmt nuts at mcd store., suppling of flushing cistern pvc 10 liter capacity (low level white with fitting ,accessories and flush pipe ) at mcd store., supplying of ptmt -tower bolt 152x42x18mm at mcd store ., supplying of enamel paint at mcd store., supplying of cpvc pipe 15 mm dia at mcd store., supplying of vitreous china orrisa type w.c pan size 580 at mcd store., supplying of vitreous china pedestal type water closet at mcd store., supplyinh of white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350mm with waste fitting as per is:2556 at mcd store, suppying vitreous china angle back wash basin 630x450 mm at mcd store., supplying of ptmt pillar cock (fancy)15mm flow at mcd store, supplying of ptmt -urinal spreader b15mm at mcd store, suppying of polyethylene water storage tank with cover and suitable locking arrangement at mcd store ., supplying of c.p.brass angle valve 15mm at mcd store, supplying of 20mm dia ptmt stop cock at mcd store

CTN :41520030

17 Sep, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : supply of fasteners e e - screw uni 5739_m5x30 , screw uni 5739_m6x12 , screw uni 5739_m8x30 , screw uni 5739_m12x25 , screw uni 5739_m12x35 , screw uni 5931 m5x10 , screw uni 5931 m5x12 , screw uni 6107 m3x10 , screw uni 5739 m5x12 , srew m4x4 uni 5923 , hex head screw iso 4017 m3x10 a4- 70 pa , hex head screw iso 4017 m4x16 a4-70 pa , hex head screw iso 4017 m5x10 a4-70 pa , hex head screw iso 4017 m5x12 a4-70 pa , hex head screw iso 4017 m5x16 a4-70 pa , hex head screw iso 4017 m5x20 a4-70 pa , hex head screw iso 4017 m5x25 a4-70 pa , hex head screw iso 4017 m6x12 a4-70 pa , hex head screw iso 4017 m6x16 a4-70 pa , hex head screw iso 4017 m6 x20 a4-70 pass , hex head screw iso 4017 m46x25 a4-70 pa , hex head screw iso 4017 m6 x35 a4-70 pass , hex head screw iso 4017 m8x25 a4-70 pa , hex head screw iso 4017 m8 x30 a4-70 pass , hex head screw iso 4017 m8 x35 a4-70 pass , hex head screw iso 4017 m10x20 a4-70 pa , hex head screw iso 4017 m10x25 a4-70 pa , hex head screw iso 4017 m10x30 a4-70 pa , hex head screw iso 4017 m10x35 a4-70 , hex head screw iso 4017 m10x50 a4-70 , screw iso 4762 - m3 x 16 - a4 - 70 -pass , screw iso 4762 - m4 x 12 - a4 - 70 pass , screw iso 4762- m4 x 16 - a4-70 pass , screw iso 4762 - m4x25 - a4 - 70 pass , screw iso 4762 - m5 x 12 - a4 - 70 pass , screw iso 4762- m5 x 16 -a4-70 pass , screw iso 4762 - m5 x 20 - a4-70 pass , screw iso 4762 - m8 x 16 - a4-70 pass , screw iso 4762 - m8 x 20 - a4 - 70 pass , uni 6108 screw - 6 x 8 , uni 6108 screw - 6 x 10 , screw m4x8 uni 6109_88 , screw m5x12 uni 6109_88 , screw m6x12 uni 6109_88 , screw m6x16 uni 6109_88 , m5 x 28 uni 5737 screw , m5 x 35 uni 5737 screw , m3x10 uni 5931 screw , m4x20 uni 5931 screw , m5x12 uni 5931 screw , m5x14 uni 5931 screw , m5x16 uni 5931 screw , m5x25 uni 5931 screw , m6x12 uni 5931 screw , m6x16 uni 5931 screw , m6x25 uni 5931 screw , m6x30 uni 5931 screw , m8x20 uni 5931 screw , screw ph m2.5x5 uni 7687 , screw uni 6107 m3x6 , screw uni 6107 m4x10 , m4x8 uni 6109_88 screw , m5x10 uni 6109_88 screw , screw uni 5933 m 6x12 inox a4-70 pass , screw uni 5933 m 8x20 inox a4-70 pass , screw uni 5933 m 8x25 inox a4-70 pass , hexagon socket head cap screw iso 4762 - m5 x 45 -a4 -70 pass , plastic screw mp50-10-20 , hexagon socket set screw with cone iso 4027 - m4x8 -a4-21h pass , drilled head screw uni 5931 m8x20 , drilled head screw uni 5931 m6x12 , hexagonal drilled head screw uni 5931 m5 x 8 , hexagon head bolt iso 4017 - m4 x 10 - a4 - 70 pass , hexagon head bolt uni 5739 - m8 x 14 , hexagon head bolt uni 5739 - m8 x 20 , hexagon head bolt uni 5739 - m10 x 18 , hexagon head bolt uni 5739 - m12 x 25 , hex head bolt iso 4014 m6 x60 a4-70 pass , hexagon head bolt iso 4014 - m8x40 - a4-70 pass , m10 uni5588 hexagon nut , m12 uni 5588 hexagon nut , nut with external thread m30x1.5 , locknut m3 uni 7473 - a4-50 pass , locknut m5 uni 7473 - a4-50 pass , locknut m6 uni 7473 - a4-50 pass , locknut m8 uni 7473 - a4-50 pass , locknut m12 uni 7473 - a4-50 pass , self locking nut m5 uni 7474 , self locking nut m6 uni 7474 , n 3- 13 - 10 lock nuts

Central Government/Public Sector

CTN :41603178

16 Sep, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For corrigendum : supply of h-433 - butter fly nuts of 04 nos ru locker at foxle & q/deck and 08 in nos vent flaps at foxle /q d , h-432 - locking mechanism and wooden structure of officer s alleyway doors (port and stbd) found def

Central Government/Public Sector

CTN :41596971

23 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & n

Central Government And Public Sector

CTN :41618245

18 Sep, 2025 NA

Angul - Odisha

Tender For supply of machining spares for pot equipment : : - cafd atfdassy locking pin , stud for t h crust breaker , breaker ins ring , upper valve disc , pneum pipe twin hopper , guided spacer for cafd , riser support plate for pl 3 and 4 , tie rod 0816969 with nuts and washer , washer p n 38 of drg 2161 pin lock plate , locling pin of swing bar drg no a3 2167 , stud for s b lift hook cyl , extension rod for breaker cylinder , vent pipe , stud and nut 24x430 , top door hinge , brass nut for tapping laddle tilting be

Central Government/Public Sector

CTN :41618732

08 Sep, 2025 1.84 Lacs

Paschim Medinipur - West Bengal

Tender For supply of 5mm penny washer , 5mm big head rivet al , thread locking adhesive , bow fender , argon gas size 12 kg small cylinder , nyloc nut bolt m6 with washer , dendrite rubber gum size 01 kg , screw ss size 1 inch , screw ss size 3 by 4 inch , grinding wheel aluminium oxide , grinding wheel silicon carbide , hacksaw blade half inch , emery sheet , m16 nuts and bolt with washers ss , m10 nuts and bolt with washers ss , m8 bolt ss with nyloc nut , m5 bolt ss with nyloc nut , plastic d shakle 10mm , lug ring type hex 16sq mm , lug ring type hex 25sq mm and 35sq mm , lug ring type hex 18sq mm , lug pipe connector 10sq mm , lug pin type hex 1sq mm , lug pin type hex 2 dot 5sq mm , lug pin type hex 25sq mm , battery clips 16 amps , rubber beading for inspection hatch , cutting wheel , o ring kit , lug snap type female hex 1 dot 5 sq mm , lug ring type hex 6 dot 4 sq mm , lug ring type hex 1 dot 5 sq mm , lug ring type hex 25 sq mm , lug ring type hex 2 dot 5 sq mm , lug ring type hex 4 dot 6 sq mm , lug ring type hex 10 sq mm

Central Government/Public Sector

CTN :41651226

16 Sep, 2025 160

Davangere - Karnataka

Tender For supply of orthopedic implant to chigateri district hospital, davangere - locking reckon plate, suture anchors all size , acl/pcl sets, spine instrumentation , thr sets, tkr sets, pfn - a2, k nail, square nail, stelnmanl pin, derhaml pin, bohler stirrup, rush pin, ilizarov rubiks cubes, ilizarov slotted threaded rods, ilizarov threaded rods, ilizarov multiple pin fixation clamp, ilizarov single p.n. bolt fixation, ilizarov hinges - male, female, ilizarovhinges-90, ilizarov conneting plates with threaded ends, ilizarov connecting plate (long), ilizarov connecting plate (short), ilizarov hinges male, female, ilizarov graduated telescopic rods, ilizarov telescopic rods, ilizarov conical washer couple, ilizarov wire fixation bolt, olive wire, ilizarov washers a) slotted b)spacing c)spilit locking, ilizarov wire, ilizarov threaded sockets, ilizarov flat sided washers, ilizarov nuts, ilizarov connecting bolts, ilizarov bushings, ilizarov post - male, ilizarov post - female, ilizarov distractor, ilizarov curved plates, ilizarov twisted plates, ilizarov wire tensioner, ilizarov 6/8, 3/4th ring, ilizarov half ring, jess z connecting rods, jess half pins, jess connecting rods, jess k. wires, jess beta clamps, jess distractor, jess l clamps, jess comeeting rod - all, jess fixator components in separate detailed list, ilizarov componenis in separate list, ilizarov wires, olive wires, proximal humeral nail-phn, trochantric femural nail-tfn, trochantric stabilisation plate-tsp, osteotomes , figure of 8 plates, medial and lateral distal humerus locking plates, mini plates for small bones - phalynx, carpal metacardpal, exterrnal fixator - ex fix system, suprapatellar approach expert tibial nail, ethi bond, simplex bone cemenf 40 grams (antibiotic) , simplex bone cement 40 grams , simplex bone cement 20 grams , tit suture disk , tit endo button , r/u distaractor unit, 6,8,10,12 , conecting rod 4mm, length 4,6,8,10,12 , a.o.clamp 3.5mm , a.o.clamp 2.5mm , connecting rod 11mm, lenth 8,10,12,14,16, , trancverse clamp , rod to rod clamp , a.o.clamp 4.5mm , schanz pin 6.5mm 9 conical threaded, schanz pin 6.5mm 9 cancellous threaded , schanz pin 5.0mm 9 32th cancellous thr , schanz pin 4.5mm 9 32th , schanz pin 4.5mm 9 16th , schanz pin 3.5mm 6, schanz pin 3.0mm 6, schanz pin 2.5mm 6 , denham pin 9, 4,4.5,5mm , steanman pin 9, 3mm to 5mm , s.s. wire, 16swg to 30swg, threaded k wire 6 , 1mm to 3mm, k wire 12 , 1 mm to 3mm , k wire 6, 1mm to 3mm , malleolar screw, length 25mm to 50mm, 55mm to 80mm, cancellous screw 6.5mm , (fully threaded), length 25mm to 60m, 65mm to 100mm, cancellous screw 6.5 mm , (16mm threaded), length 25mm to 60mm, 65mm to 100mm, cancellous screw 4mm , (fully threaded), length 15mm to 35mm, 40mm to 80mm, cancellous screw 4mm , (16mm threaded), length 15mm to 35mm, 40mm to 80mm, cortical screw 4.5mm, cortical screw 3.5mm , reconstruction plate 4.5mm, 4 hole to 8 hole, 9 hole to 12 hole, y plate all sizes, l butters plate left & right, 3 hole to 8 hole, 9 hole to 12 hole, t butters plate 4.5mm, 3 hole to 8 hole, 9 hole to 12 hole, narrow d.c.plate 4.5mm, 5 hole to 8 hole, 9 hole to 14 hole, reconstruction plate 3.5mm curved, (d.c.hole), 4 hole to 6 hole, 8 hole to 10 hole, 12 hole to 14 hole, reconstruetion plate 3.5mm , 4 hole to 8hole, 9 hole to 12 hole, small d.cplate, 5 hole to 8 hole, 9 hole to 12 hole, rd 1/3 tubular plate, 4 hole to 10 hole, d.c.s.95 barrel plate round hole , 5 hole to 8 hole, 9 hole to 14 hole, d.h.s.short/long barrel round hole, 125, 130, 135,140 , 4hole to 8 hole, 9hole to 14 hole, d.h.s lag screw, 50mm to 110mm, washer 6.5mm, washer 4mm, cannolated cancellous screw 6.5mm, (16mm threaded) length 25mm to 60mm, 65mm to 100mm, cannulated cancellous screw 4mm, (16mm threaded) , length 15mm to 35mm, 40mm to 80mm, bipolar xl, dia 39mm to 53mm , austin moore prosthesis, dia 39mm to 53mm , distal fibula locking plate, 4 hole to 10 hole, left & right, clavicle hook locking plate, left & right, 4 hole t

Central Government/Public Sector

CTN :41581072

15 Sep, 2025 NA

Multi City - Multi State

Tender For supply of self-locking spring inserted steel nut single piece reusable of size m-27 for 28 mm dia. hook bolt as per rdso spec. no. 1773549/2023/o/o ed/bns/rdso. including 01 no. appropriate box wrench /50 nos. nuts. spec. details: ln- 37.5 mm, sn- 41.0 mm, hn- 22.0 mm, bn- 41.0 mm, cn- 47.3 mm. plating- electro-galvanized or hot-dip galvanized or nickel alloy. nas3350 vibration test certificate required with proper oem/ authorization certificate. make- saper lock or similar.

State Government

CTN :41502737

10 Sep, 2025 NA

Delhi - Delhi

Tender For tender for supply of steel rack - providing and placing closed type steel rack of size 915x450x2000 (wxdxh) having 6 shelves making 5 compartments. shelves & sides made of mild steel sheet not less than 1mm. shelves having load bearing capacity of 100kg. uniformity divided load per shelf. slotted angle shall be 40x40x2mm. shelves & angle shall be joint with galvanized hex. nuts & bolts. each rack shall be provided with rubber shoes at the bottom. all components are duly anti-rust treated and painted for long lasting finish. , providing & placing table of size 1800x1050x1000mm (wxdxh). table top made of 14 gauge (crca sheet) cold rolled close annealed , as said before that metal is rolled in temperature below recrystallization level , cold rolled are much harder and have smoother finish than hot rolled metal. table having provison of ms l angel of size 40x40x4mm thick at all four corners for extra strength. table having 4 legs made in 50x50mm crca square pipe duly powder coated and base beam made in 50x50mm crca square pipe duly powder coated. all the steel components shall be welded together to form one unit and powder coating of minimum 50-60 microns dry film thickness in conveyorised powder-coating plant with bakin oven and powder applicators after 10 tank pre treatment process flow using hankel chemical. , providing and placing low height closed type steel rack of size 915x600x1500 (wxdxh) having 2 shelves making 1 compartments. shelves & sides made of mild steel shelves & sides made of mild steel sheet not less than 1mm. shelves having load bearing capacity of 100kg. uniformity divided load per shelf. slotted angle shall be 40x40x2mm. shelves & angle shall be joint with galvanized hex. nuts & bolts. each rack shall be provided with rubber shoes at the bottom. all components are duly anti-rust treated and painted for long lasting finish. , providing and placing low height closed type shoe steel rack of size 915x400x1200 (wxdxh) having 5 shelves making 6 compartments. shelves & sides made of mild steel sheet not less than 0.8mm. slotted angle shall be 40x40x2mm. shelves & angle shall be joint with galvanized hex. nuts & bolts. each rack shall be provided with rubber shoes at the bottom. all components are duly anti-rust treated and painted for long lasting finish. , providing and placing steel clothes lockers overall size 915(w) x 480(d) x 1980(h) mm with unit size 450x457x450 with all accessories having 8 lockers made of ms sheet front openable shutter with ms sheet of thickness not less than 20 gauge and other sides the thickness of ms sheet should not be less than 22 gauge , powder coated ife locking arrangement and fitting etc. , complete as per direction of engineer- in-charge. , providing and placing closed type steel rack of size 915x450x2000 (wxdxh) having 4 shelves making 3 compartments. shelves & sides made of mild steel shelves & sides made of mild steel sheet not less than 1mm. shelves having load bearing capacity of 100kg. uniformity divided load per shelf. slotted angle shall be 40x40x2mm. shelves & angle shall be joint with galvanized hex. nuts & bolts. each rack shall be provided with rubber shoes at the bottom. all components are duly anti-rust treated and painted for long lasting finish.

Suspension Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors