Latest switchgear panel repair Tenders | Government switchgear panel repair Tenders

CTN :45663041

29 Jun, 2026 45.03 Lacs

Panipat - Haryana

Tender For carrying out electrical installation testing and commissioning of transformers switchgear motors cables and associated electrical systems as per eil std spec for composite work for u and o part b project of iocl panipat refinery haryana

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

corporations/Associations/Others

CTN :45619316

10 Jul, 2026 NA

Bardhaman - West Bengal

Tender For providing of custom bid for services - proposal for electrical insulation floor painting in ht and lt switchgear rooms in esp iph switchyard oph and chp dstps dvc

Central Government/Public Sector

CTN :45409373

11 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; electrical system or installation, biennial maintenance contract of m/s schneider make 11 kv switchgear panels and vcbs of stp1 and methanol plant at rcf ..

State Government

CTN :44927757

01 Jul, 2026 NA

Kheda - Gujarat

Tender For corrigendum : works of preventive maintenance, shutdown & emergency maintenance of grp,ht/lt switchgear,400/220kv/gis switchyard /coal yard c/r relay panel compartment cleaning, tb tightness, electrical testing kit lifting/shifting work etc.

corporations/Associations/Others

CTN :45301926

22 Jun, 2026 43.00 Lacs

Ghaziabad - Uttar Pradesh

Tender For corrigendum : electrical works - works under the 'business plan 2026-27' head—specifically comprising 33 kv vcbs, 33 kv switchyards, 11 kv switchgear, and the strengthening and protection of 33/11 kv substations—to be executed within the jurisdiction of the urban electricity distribution division (33 kv), trans-hindon area, ghaziabad, under the administrative control of the urban electricity distribution circle (commercial & technical), ghaziabad.

corporations/Associations/Others

CTN :45469923

22 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; overhauling of various ht/lt transformers, ip/sp bus-ducts and associated electrical systems, 6600v unit, station and ash handling switchgear buses, servi..

CTN :45453100

29 Jun, 2026 NA

Howrah - West Bengal

Tender For augmentation & improvement of electrical substations, switch rooms with associated ht/lt switchgear panel, cables, transformer, earthing & other safety items under the jurisdiction of sse/g/kwae & sse/g/rph".

CTN :45445126

25 Jun, 2026 NA

Hisar - Haryana

Tender For expression of interest (eoi) from any reputed manufacturers for budgetary quotations for supply of electrical equipment materials within the jurisdiction of dhbvnl on for destination basis- heat shrinkable termination kit for 11 kv xlpe cable (outdoor type) , 3cx50mm2 , 3cx95mm2 , 3cx120mm2 , 3cx185mm2 , 3cx300mm2 , 3cx400mm2 , scx630mm2 , heat shrinkable termination kit for 11 kv xlpe cable (indoor type) , 3cx50mm2 , 3cx95mm2 , 3cx120mm2 , 3cx185mm2 , 3cx300mm2 , 3cx400mm2 , scx630mm2 , 11 kv 3/c cable heat shrink type straight through joint of sizes , 3/cx50mm2 cable , 3/cx95mm2 cable , 3/cx120mm2 cable , 3/cx185mm2 cable , 3/cx300mm2 cable , 3/cx400mm2 cable , s/cx630mm2 cable , sleeve , sleeve, 11 kv insulated medium voltage line cover (mvlc) for acsr conductor (sleeve) suitable for size upto 100 mm2 as per nigam's technical specification /relevant iss and latest amendments thereof , un-armoured copper control cable , 2c x 4mm2 , 2c x 6mm2 , 3c x 4mm2 , 4c x 4mm2 , 6c x 4mm2 , 7c x 2.5mm2 , 10c x 2.5mm2 , lt xlpe armoured cable , lt xlpe mm2 cable un-armored 1c*300 , lt xlpe armoured 2c*16 mm2 cable , 33 kv ht tr-xlpe cable , 3/c 300mm2 , 3/cx400mm2 , 11 kv h.t. tr-xlpe cables , 11 kv 3c*400 mm2 tr-xlpe armoured cable(hdpe extruded cable duct) co- , 11 kv 3c*300 mm2 tr-xlpe armoured cable(hdpe extruded cable duct) co-, , 11 kv 3c*185 mm2 tr-xlpe armoured cable(hdpe co-extruded cable duct), , lt feeder panel and lt switchgear, , 400 amps acb, 4 pole, manual operated, fixed type with enclosure, , 200 amps mccb with enclosure, , 100 amps mccb with enclosure, , 7 way distribution feeder panel with 2 nos. mccbs, 4 pole, 3phase, 415 v, 400 amps for incoming and 5 nos. outgoing mccbs 4 pole, 3phase, 415 v, 100 amps rating type suitable for outdoor installation, in accordance with technical specification (type-d), , 33 kv rmus, , outdoor type 33 kv sf6 type extensible and motorized 5 way rmu (2lbs+3vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts, , outdoor type 33 kv sf6 type extensible and motorized 5 way, , outdoor type 33 kv sf6 type extensible and motorized 4 way rmu (2lbs+2vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 4 way rmu (2lbs+2vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (2lbs+1vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (2lbs+1vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (1lbs+2vcb) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (1lbs+2vcb) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (3lbs) with fpi as per is (without frtu) with the provision of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 3 way rmu (3lbs) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) with the provision, , of self-powered supply through 1 kva aux transformer (33/0.230 kv) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) as per ts., , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (2lbs) with fpi as per is (without frtu) as per ts. (both side extensible), , outdoor type 33 kv sf6 type extensible and motorized 2 way rmu (1lbs+1vcb) with fpi as p

CTN :44961942

15 Jun, 2026 65.76 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : supply of spares for lnt make lt and ht switchgear, breakers and panel accessories of electrical circle and chp circle, csctpp, chhabra - racking handle for cn-cs 5000c, racking handle cn-cs 4000 h2, lockable trip push button type-aa, fixed arcing contact 800 s1, moving arcing contact 800s1, moving arcing contact, 5000c, hardware kit, spring charging, motor 220 v dc, spring charging limit, switch 220 v dc, closing coil 220 v dc, shunt release 220 v, dc, test position microswitch, service position microswitch, mdo to edo 800-, 2500c,3200h1(3p), mdo to edo 3200h1(4p), mdo to edo 5000c (4p), pole assembly 800c d/0, brekaer, door camlock-lhs, door camlock-rhs, racking handle, sic puller tq3 mat.-, delrin500, locking angle -tq3 m, tq3 earthing lip assembly, aux. busbar support, tq+tf2 v, aux.busbarterm assy, tf3,tq3-fr, aux.busbar support assy, tf3,tq3-fr, stainless steel door lock, td3,tf3-fr, bracket ,reset cord mn5 relay, ,tq3, xtension shaft, dropper support assembly, tq3 form iv, safety shutter tq3 d/o, safety shutter opener tq3, d/o, vcb spares 11 kv and 6.6, kv, big gear assembly, small gear -charging gear, assembly 12 kv vcb-25ka, subadha aux switch, (12no+12nc), tripping coil, closing coil, spring charging motor, vcb sds housing wo wire, pin locking channel, assembly, vaccum interrupter abb, vg6, drive rod assembly 800, a,1250a,2000a, vcb racking handle, spring charging handle, tripping rod, pin type channel racking, fixture 600 w, pin type channel racking, fixture 1000 w, breaker shutter assembly, 600 w, breaker shutter assembly, 1000 w, switron, switch,switron, 12no/12nc) aux., switch, rackin handel &, interlock, locking channel, assy 12kv 1250a 40ka, 1000w 3150a locking, channel assembly, limit switch, test/service,omron, make limit, switchmodel: x-, 10gm-b,contacts: 1, c/o, shutter roller, bracket 3150 a, roller for shutter, 3150a 40ka, pin for shutter, roller 3150a 40ka, 3150a breaker arm, contact - finger, contip finger f 2000a, vcb breaker, m4 flat washernylon(, 4.5 x 9, x 0.8mm), x 10-cozn pan head, m/c, screw, spring washer (zc), bottom conductor, arm, assy 12kv 3150a 40ka, top conductor arm, assembly 12kv 3150a, 40ka-abb, vi, 800a breaker arm, 800a vcb contact, finger assy new, flexible conductor, 12kv 800a, 40ka- abb vi, 2000a breaker arm, contip finger f 2000a, ø4 ss e-clips, ø6 ss e-clips, ø8 ss e-clips, ø10 ss e-clips 0.8mm, thk, circlip dia. 12mm, 1 mm, thick, 24 external type, circlip, wire circlip dia. 3.4+0/-, 0.4 ss, m3 x 25 spring pin, m3 x 30 spring pin, x 25 mm cotter pins, x 30 mm cotter pins, spring pin 6.5 dia x 40, long, split pin ø3x35, split pin ø1.8x20, connector type lug, for 800a,1250a,2000a &, 3150a), male connector - dnf, 14-250fim-m, female connector -, dnf 14-250fib-m, kv switchgear vcb, spares for type vk10l40h, rated voltage:12 kv, rated, normal current:800, a,rated s.c breaking, current : 40 ka & type, vk10q40h,rated, voltage:12 kv ,rated, normal current :3150, rated s.c. breaking, current : 40 ka, pds cable asm 12 kv, 800 a, short pds r phase asm 12, kv 800 a, short pds y phase asm 12, kv 800 a, short pds b phase asm 12, kv 800 a, breaker: type vk10l40h,, rated voltage:12kv, rated, normal current: 800a,, rated s.c. breaking, current: 40ka, line pt rack-in/out handle

Switchgear Panel Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others