Tender For repair and overhauling service - sushobhikaran va sudharna tadmajla classroom; sushobhikaran va sudharna tadmajla classroom; yes; buyer premises-1 providing and fixing classroom table made of 19 mm thick plywood, finished with thick decorative laminate of approved shade and make on top surface and balancing laminate on bottom. sq.ft 700 table size shall be 14 feet (l) 2.5 feet (w) with suitable internal framing, stiffeners, and supports to ensure rigidity and durability. all exposed edges shall be finished with hardwood lipping. 2 providing and fixing step-up platform table made from 19 mm thick plywood, finished with decorative laminate on top and balancing laminate on underside. sq.ft 1408 structure shall be strong enough to withstand continuous foot traffic, with proper support framing and anti-warping construction. edges to be finished with hardwood lipping. complete in all respects including material, labour, fixing, and finishing as per site requirement. 3 providing and fixing professor table made of 19 mm thick plywood, finished with decorative laminate on top surface and balancing laminate below. sq.ft 40 table shall be ergonomically designed with appropriate height and working space suitable for faculty use. edges shall be properly finished with hardwood lipping. 4 providing and fixing lecture podium made of thick plywood, finished with thick decorative laminate on all exposed surfaces. sq.ft 32 design shall be suitable for classroom / lecture hall use with slanted top surface for documents. edges to be properly finished and rounded for safety. complete including all fittings, labour, and finishing. 5 providing, making and fixing 35 mm thick flush door shutter made from solid core , laminated with decorative laminate on both sides of approved make and shade. no 4 door shall include all necessary hardware fittings such as hinges, handles, tower bolt, door stopper, and locking arrangement of approved make. 6 providing and fixing wall-towall floor carpet of approved quality, colour, and thickness suitable for classroom use, laid over prepared floor surface. sq.ft 1664 carpet shall be fixed using approved adhesive, properly stretched, aligned, and finished to avoid wrinkles and gaps. chairs for class room 7 providing and fixing classroom chair made of heavy-duty ms tubular frame, properly welded, ground smooth and finished with powder coating of approved colour to ensure corrosion resistance and durability. nos 120 8 providing and fixing faculty chair made of heavy-duty nylon base , finished to resist corrosion and wear, suitable for continuous institutional use. the chair shall be nos 4 ergonomically designed, with medium back support, moulded pu foam cushioned seat and back, upholstered with fabric of approved make and shade. false ceiling for class room 9 providing and fixing 2 feet 2 feet grid false ceiling system consisting of approved quality pre-painted gi framework, including main runners, cross tees, wall angle, suspenders, dash fasteners, and all accessories, suspended from rods, complete in all respects. sq.ft 1664 electrical work for class room 10 supply and installation of electrical conduits, pipes, copper wiring, and cabling of approved make and size including junction boxes, accessories, testing, and commissioning. nos 1664 providing and fixing of switch and socket supply and installation of 2 2 led panel light fixtures of approved wattage suitable for false ceiling mounting. smart interactive panel and audio system 11 supply, installation, testing, and commissioning of smart interactive flat panel display (ifpd) suitable for classrooms. nos 4 having features follows:- led interactive flat panel multi-touch technology built-in operating system & hardware audio & connectivity 12 pa amplifier shall be solidstate type, with inbuilt tone control, microphone and auxiliary inputs, master volume control, and overload protection. nos 4 13 providing, supplying, installing, testing and commissioning podium m
Tender For supply of hammer ball peen -0.25 kg , plumb bob -115 grams , wooden mallet 1 kg 75mm 15mm , conduit pipe cutting and threading machines adjustable -for 15 mm to 30 mm , conduit pipe bending machine, suitable -for 15 mm,18 mm, 25 mmand 30 mm pipe , hot wire ammeter -0-15 amps. , wheatstone bridge - , voltmeter m.c. -0-300 volts , voltmeter mc multi range 0.70- 150 -300 - 600 v , voltmeter m.c. multi range -0-15 30-50 and 75 v , voltmeter centre zero -15-0-15 volts , voltmeter m.i. multi-range -0- 150- 300-600 v , voltmeter m.i. multi-range -0-50- 75- 150 v , ammeter m.i. -0-30 amp panel board , ammeter mc -0 - 500 ma , autotransformer , solid state solar based single phase energy meter , ammeter m.c. centre zero -5-0-5 amp , ammeter mc -0 - 1 amp , single phase kwh meter analog -5a - 250 v ac , single phase kwh meter digital -5a 250 v ac , three phase kwh meter analog -25a - 415 v a. c , three phase kwh meter digital -25a - 415 v a. c , watt meter dynamo meter type -5 amps. and 250 v- 1.25 kw , magnetic flux meter -0-500 tesla , meter reading instrument , hydraulic crimping tool for ug cable crimping with bits -20 sq. mm to 250sq mm , crimping tool -heavy duty , small crimping tools , rubber matting -2 meter x 1 meter x 9 mm , wiring board on stand -3 meter x 1 meter with 0.5 meter projection on the top , set of wall jumper octagonal -37mm x 450mm and 37 x 600mm , pliers flat nose insulated -150 mm , pliers round nose insulated -200 mm , screw driver heavy duty -200 mm , screw driver heavy duty -300 mm , firmer chisel -1 inch , hammer ball peen -1.0 kg , hammer cross peen -0.5 kg , rawal tool holder and bit , scriber -150 mm , file flat -300 mm rough , file flat round -150 mm smooth , file round -300 mm 2nd cut , file triangular -150 mm 2nd cut , spanner set of 6 - double ended 18x18 - 20x22- 21x23- 24x27- 25x27- 30x32 , foot print grip -250 mm , hand vice -50 mm jaw , cut out relay -16a- 440v , reverse current relay -16a- 440v , insulators including hardware fitting -egg type , insulators including hardware fitting -suspension type , knife switch dpdt fitted with fuse terminals -16 amp , various lamps with fittings -halogen incandescent lamp , various lamps with fittings -fluorescent tube , various lamps with fittings - hp mercury vapor lamp , various lamps with fittings -high- pressure sodium lamp , various lamps with fittings -low- pressure sodium lamp , various lamps with fittings - floodlights , bus bar with brackets -1 mtr each , solar dc pump -24v, 1 hp , led lights -12v- dc- 5w , led lights -6 v- dc- 5w , solar charge controller with manual switch day lighting -6v-5 a , star delta starter -manual , star delta starter -semi-automatic , star delta starter -automatic , automatic reverse forward starter - , soft starter -1 phase , field regulator -0 - 1000 ohmic -2 amps , transformer single phase -1 k.v.a. 250 -100 v , d.c. compound motor -3 h.p 250 v with 4 point starter and field regulator , d.c. shunt motor -3 h.p 250 v with 3 point starter and speed regulator , d. c. series motor -3 h.p 250 v with 2 point starter and speed regulator , mg set consisting of squirrel cage induction motor 5 hp , immersion heater -1500 watt- 240v , mixture and grinder -750 watt- 240 v , dmx controller - dmx 512 , rewinding machine -manual , control panel -5 x 3 x 1.5 -foot , working bench -2.5 m x 1.20 m x 0.75 m //bid details 2 / 64
Tender For corrigendum : supply of scania mt 1074 e e -winch brake part no 265506 , cover part no 310518 , control part no 1104198 , switch foot dipper part no 159656 , seal strip door l 2000 part no 187649 , handle window reg part no 187730 , k u rubber strip part no 256538
Tender For corrigendum : tender for supply of hose -20mm with threaded end connections , sock mount for main frame , jubilee clip 40mm , nut and bolt 12x100mm ss , level switch , hp flexible hose , victualic coupling , kit shaft seal , prefilter - filter pump shaft seal , filter pump , motor for 30tpd filter / prefilter pump , impeller 30.6id x 73 od x 9h , kit gaskets , cm 3-5 chamber complete p-4d , cm 3-5 pump shaft p-51 , cm 3-5 staybolt m8 p-181 , cm 3-5 kit gaskets , ring-circlips p-931 , casing p-1 , bearing lock out p-22 , bearing lock washer p-69 , cover gasket p-73 , constant level oiler p-77 , bolts p-171d , foot bolt p-171g , coupling , valve kit , seal.oil crankshaft , lockwasher , cap oil filler , gauge oil bubble w-gasket , o-ring crankcase cover , crank case , pin crosshead , seal oil crankcase , slinger barrier , retainer seal 2 pc , spacer lo-pressure seal , adapter male , springs coil , spacer w-coil springs , spacer v-packing , plug for priming , manifold discaharge , protector shaft wh screws , seal kit , o ring over hauling kit , victualing fitting , swash plate set , valve plate set , pulsation damper 0.16 lts. , o ring for head distriutor , sand filter , cartridge filter housing , lip seal dt module , membrane cushion , membrane cushion , pvc-u 2way solenoid vv d20 type160 nc , abs solvent cement , abs ball valve 2 way 25 mm , flow transmitter , o ring union 20 mm , o ring union 32 mm , o ring ball valve 25 mm 3-2 way pvc , connector 1 1-4 bsp m x 1 1-4 vivt , pu 4 hose , coupler for vict. coup.2.5 , pipe clamp 32 mm 2 bolt , elbow pu push in 1-4 mxpu4 qsl-1-4-6 , elbow pu push in fitting 1-4 fxpu4 , straight connector .1-4 m x pu 4 , solenoide valve , sol v-v 1-2 f230v 50hz ss316 2-way-no , two way ball valve with elec. actu. , control cabinet ro 200 , circuit breaker 1.6-2.5amp , pressure switch , miniature relay base for 2 c-o , servo motor control valve , control transformer 160 va , flow meter assembly , impeller grub screw , spacing pipe , spare kit d32 pvc , ball valve 2 way pvc-u 20 mm , dt module clamp , o-ring oil filler cap , edi module tool kit , oil gauge , hp elbow 1.for smcv , end connection flange brine and permeate , rubber hose 20mm , 325 mm long hose , 1650 mm long hose , pulsation damper , cartridge filter housing , cartridge filter element , lip seal dt module-groove ring gasket flange-sealing , air regulator , servo motor control valve , circuit breaker 1.6-2.5amp , miniature relay 24 vdc phoenix 2966171 , fuse base - 20 amp , pressure maintaining vlave , pressure switch , temperature indicator , circuit breakers 16 - 25 a , o-ring , o-ring , thermometer , 2 way ball valve assembly , 2 way ball valve ptfe d32 , ball valve abs 3 way d20 , pulley for motor , taper bush 1610 bore 24 mm , bearing hp pump , plunger rod , oil seal plunger rod , inlet valve adapter , oil drain kit , hp pump inlet manifold , frp filter type 1354 , head distributor , hp crank case oil , s.s. jubilee clips 22 mm to 30 mm , o ring crank case cover , high pressure hose module outlet , control transformer , emi filter mf 423-3-3d 200a , emi-emc choke mf 423-3-2d 200a , pressure transmitter 0-10 bar , level switch , conductivity sensor , conductivity electrode , flowmeter 40-400lph with magnetic float , lp hose 25mm idx1 bspmx500l ss316 , lp hose 32mm , h.p. flex. hose connecting hp pp and pi60 , hp hose of module in , h.p. hose module 1 to module 2 , hp hose sea water distribution manifold of dt module , lp hose hp pump inlet , hp hose discharge hose to dt manifold spool , taper bush 1615 bore 42mm , taper bush 2517 bore 42 mm , v belt , bearing hp pump motor , av mount for hp pp , av mount akcc 85m , mount for permeate transfer pump/filter pump , av mount akcc 40m , av mount for pk20 , hp pump crank case oil , jubilee clips 00 13mm to 20 mm , jubilee clips for d 25 , ss jubilee clips 2x 45 mm to 60 mm , support gravel 0.75 - 1.5 mm , support gravel 3.0 - 5.0 mm , support gravel1.52 - 3.0 mm , sand sup. fine 0.3 - 0.7mm ,
Tender For supply of pre-fabricated steel tubular ffl 2 oblic 1 structure of size 2.40 x 2.40m , quick setting compound rapidite make acclerex cico fosroc , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , manufactured sand m sand confirming to is 383 2016 specifications for coarse and fine aggregates. , bricks cement pcc brick of size 230mm x 115mm x 75 mm with sharp corners , non skid ceramic tiles coloured 7 to 8 mm thick in floors , liquid water proofing compound is 2645 2003 , white cement packet 01 kg , pvc ceiling rose 2 obliq 3 terminal with pvc square box complete with screws , led tube light fitting 1 x 12 w 2 feet long complete with all accessories including led tube rod , pvc cable insulated and pvc sheathed 1.50 sq mm twin core with copper conductor , flexible wire pvc insulated twin core twisted of size 23 obliq 0.0076 with copper conductor , modular switch one way 6 amp 1 module , white cover plate with frame 2 module , white cover plate with frame 3 module , metal flush box 2 module , metal flush box 3 module , mcb double pole 230v ac 50 hz 16 amps 10ka confirming to is 8828 1996 , mcb distribution board in sheet metal enclosure two ways with blanks conforming to is 8828 1978 , ms screw 20 mm full threaded per pkt 100 nos conforming to is 723 1972 , tape insulation 2 cm width 10 mtr long isi marked , pvc casing caping 25 mm x 16mm , pvc casing caping square box 4 inch x 4 inch , pvc body exhaust fan 250mm sweep with lowers , vitreous china squatting pan orissa pattern size 580 x 440 mm white with integral foot rests , pvc valve less syphonic action type low level flushing cistern 10 ltrs capacity , 110mm dia upvc pipe 3 mtr long single socketed with cowl , 110mm dia upvc single tee , 110 x 110mm nahani trap with jali , 4 inch dia upvc bend , 15mm brass stop cock conforming to is-8934 1978 , 3 layer of pp r polypropylene random copolymer pipes sdr 7.4 , 20mm elbow suitable for 20mm dia ppr pipe conforming to is 1239 1989 , 20mm socket suitable for 20mm dia ppr pipes conforming to is 1239 1989 , 20mm equal tee suitable for 20mm dia ppr pipe conforming to is 1239 1989 , 20mm union suitable for 20mm ppr pipes conforming to is 12391989 , ppr end plug 20mm conforming to is 1239 1989 , ppr pipe clamp suitable for 20mm piping , bib cock 20 mm with flange conforming to is 8931 1978 , gi reducer socket 15 obliq 20mm , gi reducer elbow 15 obliq 20mm , pre fabricated man hole cover 6 feet x 4 feet made of isa 40x40x6mm frame , rotational moulded polyethylene water storage tank double layer , ppr tank connector 20mm with check nut and washer , white lead safeda , thread cotton ball 100 m long , vitreous china wash hand basin whb white flat back size 550x400 mm , 20mm dia pillar taps of ptmt of any colour high pressure screwed for iron pipe , 110mm dia upvc swr pipe single socketed pipe type a in any length with rubber joint , 600x450mm size looking mirror mounted on pvc with pvc shelf assembly including all fittings all as specified
Tender For supply of foot switch spring load for sanding, vigilance and release of indep. brake (pos. no.192.1.235.262) as per clw specn. no. clw/es/3/0032 alt.-g and clw drg no.clw/es/3/sk-1/32/ g and (abb pro.no.3ehp585810r00) [ warranty period: 30 months after the date of delivery ]