Latest swivel seat Tenders | Government swivel seat Tenders

Central Government/Public Sector

CTN :42432890

31 Oct, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of seat reclining arrangement

Central Government / Public Sector

CTN :42435316

18 Nov, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of top spring seat for axle box guide arrangement.

CTN :42265353

28 Oct, 2025 NA

Madurai - Tamil Nadu

Tender For supply of furniture for computer and eee department - list of furniture, junior executive table: teakwood legs laminated top cupboard on one side and 4 closed drawer on other side with keyboard arrangement size : 5 x 3 x 2 , 6 steel senior plain cup board 4 shelves forming 5 compartments size : 6 x 3 x 1 (19 ), 6 x1.1/2x 2.1/2 (lxbxh) steel desk with shelf writing top 1.2 mm 18 gauge cr sheet, book shelf 1 mm 20 gauge cr sheet, ms oil pipe leg frame mic welding, paint finishing red oxide & paint finishing (brown colour).6 x1.1/4x 3 (lxbxh) steel bench with backrest 1.2 mm 18 gauge cr sheet, sitting top 1.2 mm 18 gauge cr sheet, 24 mm 18gauge, ms oil pipe leg and backrest frame bottom seat 18inches and backrest 9inches cr sheet plate fixing mic welding, paint finishing red oxide & paint finishing (brown colour)., executive steel table l topsq tube legs with 3 drawer on one side and cabinet on other side with l topsize : 4 x 2 x 2 , s type knitted chair with armusing teak wood frame nylon wire knitted seat and back

CTN :42365220

31 Oct, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For providing & arrangement of high back chair :-tilt mechanism with multi locking, high density cushion on seat composite leather with metallic sliver finish base and arms with p.u.castors gaslift for hiehht adjustment)

Central Government/Public Sector

CTN :42263916

25 Oct, 2025 NA

Sundergarh - Odisha

Tender For supply of spares parts for boiler feed pump 2502002123 - disc,balance,pump,pn 601,dwn pr26485b, , disc,counter balancing,pump,pn 602, , wearing ring,feed pump,mm hda 100-10, , impeller,wear ring,pump,mm hda 100-10, , wear ring,pump,pn 512,mm hda 100-10, , sleeve,stage,pump,pn 521,mm hda 100-10, , sleeves,spacer,pump,mm hda 100-10, , sleeve,centring,pump,pn 526,mm hda100-10 , bush,stage,pump,pn 541,mm hda 100-10, , shaft,with keys,pump,mm hda 100-10, , bearing shell,pn 1370,f- pump hda 100-10 , o ring set,mm hda 100-10,ksb pumps ltd , pins,f-feed pmp,mm hda 100-10,ksb ltd disc,balance,pump,pn:601,dwn:pr26485b, balancing disc for boiler feed pump part no 601 of supplier drg. no p r 26485 b & moc as per pr 26485 d (sheet 2,3,4 of 4) and supplier general arrangement drg no f 28533 b liquid to be handled : boiler feed water p h of water : 8.5 to 9.2 operating temperature : 115 deg centrigade kinematic viscosity of fluid : 0.2501 cst speed : 2900 rpm power : 423 kw : motor rating : 530 kw material of balancing disc : a 182 gr f 6 a b the part no 601 should have matching dimension as per part 602 of hda 100/10 model & earlier supplied pump bearing serial no :5111016441-000100 - (01 to 04) manufacturer : ksb pumps ltd part no : 601 drawing no : p r 26485 b drawing no : f 28533 b drawing no : pr 26485 d (sheet 2,3,4 of 4), disc,counter balancing,pump,pn:602, counter balancing disc ( cbd) for boiler feed pump part no 602 of supplier drg. no p r 26485 b & moc as per pr 26485 d (sheet 2,3,4 of 4) and supplier general arrangement drg no f 28533 b liquid to be handled : boiler feed water p h of water : 8.5 to 9.2 operating ) /bid number : gem/2025/b/6769908 * /dated: 13-10-2025 & & / bid document 1 / 23 temperature : 115 deg centrigade kinematic viscosity of fluid : 0.2501 cst speed : 2900 rpm power : 423 kw : motor rating : 530 kw material of counter balancing disc seat ( cbd) : a 182 gr f 6 a c the part no 602 should have matching dimension as per part 601 of hda 100/10 model & earlier supplied pump bearing serial no :5111016441-000100 - (01 to 04) manufacturer : ksb pumps ltd part no : 602 drawing no : p r 26485 b drawing no : f 28533 b drawing no : pr 26485 d (sheet 2,3,4 of 4), wearing ring,feed pump,mm:hda 100/10, wearing ring for boiler feed pump of model no. h d a 100/10 as per part no 502 of supplier crossectional drg. no : pr 26485 b ; supplier pump ga drg no f 28533 b and moc as per pr 26485 d (sheet 2,3,4 of 4 ) liquid to be handled : boiler feed water ; p h of water : 8.5 to 9.2 operating temperature : 115 deg centrigade kinematic viscosity of fluid : 0.2501 cst speed : 2900 rpm power : 423 kw : motor rating : 530 kw material of wearing ring : cr. hard 400 the wearing ring should conform to that of hda 100/10 model and compatible to earlier supplied pump bearing serial no :5111016441-000100 - (01 to 04) 1 set = 10 nos. manufacturer : ksb pumps ltd type/model : h d a 100/10 part no : 502 drawing no : pr 26485 b drawing no : f 28533 b drawing no : pr 26485 d (sheet 2,3,4 of 4 ), impeller,wear ring,pump,mm:hda 100/10, impeller wear ring for boiler feed pump of model no. h d a 100/10 as per part no 503 of supplier crossectional drg. no : pr 26485 b ; supplier pump ga drg no f 28533 b and moc as per pr 26485 d (sheet 2,3,4 of 4 ) liquid to be handled : boiler feed water ; p h of water : 8.5 to 9.2 operating temperature : 115 deg centrigade kinematic viscosity of fluid : 0.2501 cst speed : 2900 rpm power : 423 kw : motor rating : 530 kw material of impeller wearing ring : 1.4024.19 the wearing ring should conform to that of hda 100/10 model and compatible to earlier supplied pump bearing serial no :5111016441-000100 - (01 to 04) 1 set = 10 nos. manufacturer : ksb pumps ltd type/model : hda 100/10 part no : 503 drawing no : pr 26485 b drawing no : f 28533 b drawing no : pr 26485 d (sheet 2,3,4 of 4 ), wear ring,pump,pn:512,mm:hda 100/10, wear ring for boiler feed pump of model no. h d a 100/10 as per part no 51

CTN :42216328

20 Oct, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of bib cock cp 15mm , cp pillar cock 15mm bore , cp angle valve 15mm , cp shower rose fancy type , cp towel ring , cp towel rail 60 cm long , cp telephonic showers , cp coupling 32mm , cp swan neck pillar tap 15mm , cp bib cock 15mm short body , cp bib cock 15mm long body , cp bottle trap 32mm , cabinet mirror pvc , gi elbow 15mm dia isi marked , gi elbow 20mm dia isi marked , elbow reducing 20x15mm , gi socket isi marked for 15 mm dia pipe. , gi socket isi marked for 20 mm dia pipe. , gi bend 15mm dia isi marked. , gi union 15mm isi marked , gi union 20mm isi marked , gi tee 15mm dia isi marked , gi tee 20mm dia isi marked , hexa nipple gi 15mm dia isi marked , plug gi 15mm bore pipe isi marked. , kitchen plat rack of stain less steel over all size 31 x 30 x 10 inch , pvc ball valves 15mm bore ptmt with epoxy coated aluminiumrod and high density plastic ball , pvc ball valves 20mm bore ptmt with epoxy coated aluminiumrod and high density plastic ball , pvc bib cock cobra series quarter turn suitable for 15mm dia bore pipe , ms sliding door bolt 300mm long and 16mm dia of bolt , al. tower bolt 150mm long isi marked , m s tower bolt 200 mm long , galvanised ms wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm , ss aisi 304 coloured coated sink with drainage board made out of 1mm thick steel sheet for kitchen 940mmx455mm with bowl size 405mmx355mmx178mm , stainless steel aisi 304 coloured coated sink without drainage board made out of 1mm thick 495mmx420mm with bowl size 405mmx3550mm , plastic water closet seat cover suitable for europian type wc , plastic water closet seat cover suitable for europian type , pvc low level flushing cistern 9 to 10ltr capacity , hydraulic door closer suitable for door size upto 1000mm max max door weight 90 kg normal coloured , wall mixer with telephonic or long bend arrangement with ligset and wall flange, without hand shower and tube brass c.p. , vitreous china coloured whb size 580mmx450mm , grating doom 125mm dia with waste hole of ptmt , wall mixture set with hand shower, flexible pipe, adjustable wall , bracket , elbow, comply and over head shower set 15mm , cp brass , looking mirror 600mm x 450mm x 5mm beveled edge of selected quality glass mounted on commercial plywood , basin single lever mixture swivel 15 pipe mm , cp wall mixture brass three in one for 15mm bore pipe with leg set and metal flange , floor door stopper aluminium superior quality of size 100mm , pvc flexible waste pipe 32mm dia , pvc connections 15mm size with ptmt nuts of length 450mm , rotational moulded polyethylene water storage tanks 500 ltr capacity , butt hinges ms 75mm isi marked , butt hinges ms 50mm isi marked , butt hinges ms 25mm isi marked , fevicol 1 kg pack make modi or pidilite , nail tack cut of size 20mm , nail 17 no , nails wire 30 mm , nails wire 40 mm , nails wire 60 mm , screw wood steel 20mm , screw wood steel 12 mm , screw wood steel 60mm , screw wood steel 25mm , screw wood steel 35mm , screw wood steel 75mm , ply wood commercial size 7x3x12mm bwr

Central Government And Public Sector

CTN :42217427

30 Oct, 2025 NA

Kaiga - Karnataka

Tender For sanitory ware and fittings - supply of toilet seat(iwc)-indian style squatting pan with orissa pattern squatting pan (size- 630 x450 mm) confirming to is:2556(part3) latest. specification: (1)location of flushing inlet- located at broad end, (2)flushing rim type- open rim type, (3)type of trap-p type with inspection vent , (4)colour- white, (5) foot rest provide- yes, supply of european style washdown water closet conforming to is:2556(part-2) latest. specification: (1) pattern 1 (fig1a), (2)type of trap- s-type, (3)colour- white (15 nos) 3. supply of seat cover for water closet confirming to is:2548(part 2) latest & suiting to item no-02. specification: (1)material of seat and cover- polypropylene, (2) material of buffer- rubber, (3) colour- white., supply of lever type flushing cistern. specification: (1)operating mechanism- lever type, (2) flushing operation- single flush system, (3)capacity- 10 ltr, (4) flush pipe- included, (5) material of flush pipe- pvc, (6)material of cistern: acrylonitrile- butadiene-styrene(abs), (7) length of flush pipe- 300mm, (8) wall thickness of cistern(+/-5%)- 1.01mm, (9) colour- white. note: cistern fixing kit with anti rusting non corrosive screws and washers to be supplied along with cistern., supply of seat cover for water closet confirming to is:2548(part 2) latest & suiting to item no-02. specification: (1)material of seat and cover- polypropylene, (2) material of hinging devices- suitable plastic (with reinforcement) (3)material of buffer- rubber, (4) rigidity- grade 1 (5)colour- white., supply of urinal bowl (flat back) without flushing rim confirming to is2556(part 6) latest. specification: (1) size- 410 x 265 x 305 mm, (2) pattern- wall hung urinal flat back without flushing rim, (3) colour- white., supply of vitreous china sinks/washbasins confirming to is2556 (part 4) including supply of nuts, bolts and fixing bracket / support accessories. specification: (1) pattern- flat back, (2) overall length (+/-10)- 40cms, (3) overall breadth (+/-10)- 60cms, (4) overall height (+/-10)- 40cms, (5)shape- oval, (6) colour- white, (7)waste hole- 32mm, (8)fixing arrangement- wall hung., supply of waste coupling for washbasin confirming to is2963 latest. specification: (1) material of waste fitting- leaded tin bronze confirming to grade 2 of is 318/1962 (2)nominal size- 32mm for washbasin. (3)thickness of ni-cr coating - not less than service condition number 2 of table 3 of is 1068/1993, supply of pvc flexible waste pipe. specification: (1) type of waste pipe- flexible, (2)material of pipe- pvc, (3)material of waste coupling attached with pipe- pvc, (4)basin connection size- 40mm, (5) length of pipe- 750mm, (6) pipe outer diameter- 40mm, (7)pipe wall thickness- 1.0mm, (8)colour- white.

Central Government/Public Sector

CTN :42241228

30 Oct, 2025 NA

Mysore - Karnataka

Tender For supply of top spring seat for axle guide arrangement to drg. no.- t-0-1-608 alt-11 & l, item no-1, is: 2062-99 gr. fe 410 cu. wc or is: 2062/2006 gr. e 250 cuc.

corporations/Associations/Others

CTN :42218093

30 Oct, 2025 17.33 Lacs

Junagadh - Gujarat

Tender For work of hiring of rto taxi passing vehicle - diesel / petrol driven, closed body suv vehicle (non a/c) for security mobile squad junagadh for 24 hrs/day, 3000km/month, time limit of 2 years, (rto taxi passing, 6+1 seat arrangement, vehicle with airbag in front seats, model: mahindra scorpio, bolero, neo, tuv or equivalent)

CTN :42154066

23 Oct, 2025 2.00 Crore

Bhopal - Madhya Pradesh

Tender For e tender for supply of rehab and training unit equipment 2025 - upper body trainer machine should offer exercise for upper body (shoulder, arms, and elbow). machine to offer bi-directional resistance. user progress should be displaced precisely with incremental reading of 0.1 walk through design to enable user to get on to machine with ease. detachable seat should be available. range of movement by adjustable arm handles to target different muscle group exercises. removable/ adjustable handles. with 19 deg from vertical plane to offer correct biomechanics. high density seat with 360 deg rotatable swivel design, adjustable height, adjustable back rest upto 20deg minimum. touch screen display with all readouts. 3 speed fan on display to add comfort. resistance 180 levels(min) with 0.2(min) increment for providing precise resistance. numeric data entry. low resistance with minimum 175 resistance setting. programs such as quick start, iso-strength, heart rate, bi-directional resistance etc. machine should be tuned to adjust workout load/rpm automatically to achieve desired level of intensity/workout. machine should be self-powered, along with ac adopter., total body trainer machine should offer exercise for total body (shoulder, arms, and elbow& lower body- leg exercises). machine to offer bi-directional resistance. user progress should be displaced precisely with incremental reading of 0.1 walk through design to enable user to get on to machine with ease. detachable seat should be available. range of movement by adjustable arm handles to target different muscle group exercises. removable/ adjustable handles. with 19 deg from vertical plane to offer correct biomechanics. high density seat with 360 deg rotatable swivel design, adjustable height, adjustable back rest upto 20deg minimum. touch screen display with all readouts. 3 speed fan on display to add comfort. resistance 180 levels(min) with 0.2(min) increment for providing precise resistance. numeric data entry. low resistance with minimum 175 resistance setting. programs such as quick start, iso-strength, heart rate, bi-directional resistance etc. machine should be tuned to adjust workout load/rpm automatically to achieve desired level of intensity/workout. machine should be self-powered, along with ac adopter., stability trainer machine should offer exercise for lateral motion strengthening exercises. machine to offer bi-directional circular motion. user progress should be displaced precisely with incremental reading of 0.1 walk through design to enable user to get on to machine without lifting leg. detachable seat should be available. high density seat with 360 deg rotatable swivel design, adjustable height, adjustable back rest upto 20deg minimum. touch screen display with all readouts. 3 speed fan on display to add comfort. resistance 180 levels(min) with 0.2(min) increment for providing precise resistance. numeric data entry. low resistance with minimum 175 resistance setting. programs such as quick start, iso-strength, heart rate, bi-directional resistance etc. machine should be tuned to adjust workout load/rpm automatically to achieve desired level of intensity/workout. machine should be self-powered, along with ac adopter., gait trainer with recumbent elliptical exercies machine should offer exercise for knee movement for improving gait training & total body, machine to offer bi-directional resistance., user progress should be displayed precisely., range of movement with arm handles to target upper body muscle group, dual position handles., high density seat with 360 deg rotatable swivel seat design., touch screen display with all readouts., 3 speed fan on display to add comfort., resistance 180 levels(min) with 0.2(min) increment for providing precise resistance., numeric data entry., low resistance with minimum 175 resistance setting., programs such as quick start, iso-strength, heart rate, bi-directional resistance etc., machine should be tuned to adjust wor

Swivel Seat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others