Latest tab washer Tenders | Government tab washer Tenders

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

corporations/Associations/Others

CTN :45318366

04 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply of tab washers m33 part no.ph 03 and ph 09 , tab washers m30 part no.ph 06 , tab washers m27 part no.ph 18 , tab washers m24 part no.ph 15 , tab washers m20 part no.ph 24 , tab washers m16 part no.ph 21 , tab washers m12 part no.ph 12

CTN :45307463

03 Jun, 2026 9.67 Lacs

Pathankot - Punjab

Tender For tender for supply of charge fire ext water type carbon , paper wrapping brown unglazed 735 mm , nails steel wire round 45mm , steel angles 40 40 6 mm , polythene fil .18mm thick , nails steel wire round 125 mm , abrasives cloth emery , pins cotter split steel , soap shaving tablet , washers spring coil type b , brass foil cold rolled 160 , s cotton thread 270 , nails steel wire round , blade hack saw hand flexible , leaded brass rod round , thread flax undyed

CTN :45318214

15 Jun, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of 5241420280 gasket for set w6 , em6290b-5285302783 modular system , em6290b-5285302883 modular system , em6290b-5295308212-s0001 plug-in board not adjusted , em6290b-5552031780 gasket , em6290b- 700292008400 tab washer , em6290b-700368022001 sleeve rubber , em6290b-700429018005 o-ring for set w5 , em6290b-700429065000 o ring , em6290b- 700429130003 o ring , em6290b-700429140000 o-ring for set w5 , em6290b-700429160001 o ring , em6290b- 700429190001 o ring , em6290b-700429244000 o ring for set w6 , em6290b-705100502035 cylinder roller bearing , em6290b-7603038101 washer a cop s2000 by 4000 , em6290b-8499970065 gasket for set w5 , em6290b-8499970066 gasket for set w5 , em6290b- 915007013000 transition socket , em6290b- e0010106951 injector , em6290b-x00041391 actuator vlv , em6290b-xp52499100226 v-band clamp , em6290b- xp52717300024 key , em6290b-xp52717300077 washer , em6299b-5240384110 conrod bearing upper half , em6299b-5272030080 gasket , em6290b-x00043422 battery , em6290b-x00055829 by 50773 sealant , em6290b-x00e50200575-76 plug in board , em6290b- x00e50700032 wiring harness for on-engine sensor , em6299b-700429010004 o-ring , em6299b-ex00036684 coolant pump , em6299b-x00040978 fuel delivery pump , em6299b-x52405500177 cylinder head cover , em6299b-x52820500001 sealing ring for seawater cooler , em6299b-x59308300058 easychange fuel filter , em6299b-x59407700023 hp fuel line , em6299b- x59499100165 sealing ring , em6299b-x59599100145 hose , em6290b-5240780824 conn fuel rail rear , em6290b-0000170660 ring c e , em6290b-0000530126 valve collet , em6290b-0000741893 spring , em6290b- 0002000017 base complete , em6290b-0055345410 switch , em6290b-111b14009 tapered compression piston ring , em6290b-111b14010 1 ring oil control , em6290b-5272010153 spacer sleeve , em6290b- 5295308712 plug-in board , em6290b-5550111610 cylinder liner , em6290b-700429021002 o ring , em6290b-700429030002 o ring , em6290b-700429043000 o ring , em6290b-x00e50208386 pressure sensor , em6290b-x52408100002 link , em6290b-xp58420400009 gasket , em6299b-ex59507300003-87 hp pump , em6299b-700429012004 o ring , em6290b- ex52710100050 exhaust turbocharger lift side , additional charges em6290b-x00012879 fuel filter, em6299b-8699950012 clamp, em6299b-x00009934 o-ring, em6299b-x00044862 sealing ring, em6299b-x52404200042 gasket for cylinder head, em6299b-x59414500018 exhaust pipe bellows, em6299b-x59420200238 restrictor, em6299b-x59499100160 o ring, em6299b-x59512500026 gasket f air transfer valv, em6299b-xp52717300001 sealing ring, em6290b-000-092-17-05 filter element, em6290b-000000000668 clamp, em6290b-0000187135 crankcase breather, em6290b-0000920260 gasket, em6290b-0000943268 contam indicator, em6290b- 0001400182 exh pipe bellows, em6290b-0002033286 valve cover, em6290b-0002033746 end plate, em6290b-0005356660 thermocouple, em6290b- 0005382130 screw driver 2 point 5 x 0 point 4, em6290b-0005382330 screw driver 4x0 point 6, em6290b-0005382530 screw driver 9x270, em6290b- 0005382735 computer accessories trackball, em6290b-0005382830 screw driver phillips 4 point 5, //bid details 2 / 72

CTN :45275681

28 May, 2026 NA

Rewari - Haryana

Tender For requirement of materal at rewari store - hacksaw blade d/e (make surya), pvc tape roll (make steelgrip), rechargeable torch 3w (havells make), rubber sheet 1/8 , enamel paint black (make asian/ berger), plastic arm chair (modular chair model no.9402) make italica, pvc copper wire 1.5mm make (polycab/rr/havells) (90mtr roll), pvc copper wire 2.5mm make (polycab/rr/havells) (90mtr roll), nylon sling 3 ton of 3 meter length (make garware), nylon sling 5 ton of 3 meter length (make garware), insulated hand gloves11kv (vidyut make), farrata fan heavy duty 500mm (make-havells), coupling link assy. for 20 to 50cs. pump with alluminium bush/synthetic rubber bush (as per sample), coupling rubbber bush with nut, bolt & washer synthetic for 20 to 60cs pump (as per sample), flood light 100watt ip66 (havells make), indicator light red/ green/ yellow, digital ammeter 3 phase abb(m1a3), l&t make(wl1310), digital voltmeter 3 phase l & t(wl1320), abb make(m1v3), enamel paint smoke grey (make asian/ berger), mccb 100 amp. 3 pole 36 ka, thermal megnetic (havells make), sisal rope 1, ms nut & bolt (5/8"x 3 ") full thread, synthetic rubber bush for 50 cs pump (67x98x160mm), synthetic rubber bush for 50 cs pump (77x100x160mm), hex. nut & bolt 1"x3.5 (high tensile), socket head cap screw ss (size m16 x60mm) ( as per sample), m.s. welded wire mesh 5ft x 50 ft (wire dia 2.5 mm and wire spacing 1x1), ms chain having link wire dia 3mm with galvanized finish (as per sample), office chair ornate model (supreme make), hydraulic crimpling tool upto (0-1000 sq mm) ring type hpct 150 b capacity upto 1000 sqmm, dies-15 set ( make jainson), pvc flexible spiral fuse reinforced heliflex hose pipe 5 id- 5 thickness 4mm, working pressure 4 kg / cm2 5%, working temperature range 5 c to 60 c and weight / mtr. is 4 kg / mtr. 7% isi 4985 2000 class 2. (as per sample), pvc flexible spiral fuse reinforced heliflex hose pipe 6 id- 6 thickness 4mm, working pressure 4 kg / cm2 5%, working temperature range 5 c to 60 c and weight / mtr. is 4 kg / mtr. 7% isi 4985 2000 class 2. (as per sample), pvc foot valve 5 (kranti make), pvc foot valve 6 (kranti make), ci nipple flange 5(as per sample), ci nipple flange 6(as per sample), ms clamp 5 dia. (heavy duty), ms clamp 6 dia. (heavy duty), pvc hose nipple 5 (as per sample), pvc hose nipple 6 (as per sample), pvc insulated unarmored 6mm 3 core copper cable (havells/polycab), 100 amp main switch 4 pole (havells make), nhd series 4 pole ac control contactor, size-1, 40a, cat.-n1n (bch make), nhd series 4 pole ac control contactor, size-1, 25a, cat.-n0n (bch make), electronic over current relay, bocr-ss-05,0.5 to 6a, 320~480vac (bch make), freedom series contactor 200a, 3 pole cat. code mce15rn (make bch), pneumatic timer, krtpcn11, 0~60 sec.,01no+01nc (220v,50hz) (bch make), pneumatic timer, krtpcn11, 0~60 sec.,01no+01nc (415v,50hz) (bch make), electronic motor protection relay with in built earth fault protection model mpr 300 range 2-2.5amp. (l&t make) , (bch make) (as per sample), analog ammeter m.i type (0-400a) (ae make)( as per sample), analog voltmeter analog 3 phase (0- 500v) (ae make) (as per sample), emery paper rough grit size 80, p80 (make 3m), digital vaf+pf meter 3 phase l&t(wl4110), abb make (m1v3), digital signal off delay timer ( model ic- 132d) make ira control (as per sample), kaccha rubber tape (6 x 3 mtr roll), single phase preventor vsp3 -415 (bch make), vernier caliper 300 mm (make mitutoyo), laser light digital techometer (non contact), tarpaulin 12x18 nylon fabric, pvc coated (heavy duty) as per sample, all terms and condition and make of above items mentioned in bid document. the above rates are inclusive of all kind of taxes including gst.

State Government

CTN :45042798

28 May, 2026 NA

Medininagar - Jharkhand

Tender For supply of trw materials under electric supply area medininagar - electrical items :, nylon washer lt 30x18x12, nylon washer lt 22x11x12, nylon washer lt 1/2", nylon washer ht1/2", nylon washer lt 3/4", r.c strip 45x5/50x5, r.c strip 40x5, b.t.c strip, r.c washer 109x78x5, r.c washer 89x45x5, r.c washer 70x45x5, r.c washer 70x45x2, r.c washer 63x35x2, r.c washer 50x28x5, r.c washer 50x28x3, r.c washer 50x28x2, r.c washer 45x25x5, r.c washer 32x14x5, c.i cap 1 1/2"

State Government

CTN :45245312

05 Jun, 2026 NA

Sagar - Madhya Pradesh

Tender For name of work: e-tender for the procurement of materials for use in nurseries under the units of the sagar social forestry circle - 1” braided water hose pipe (length: 30 meters) , monoblock motor: 1 hp, 2-phase , monoblock motor: 2 hp, 2-phase , monoblock motor: 3 hp, 3-phase , monoblock motor: 5 hp, 3-phase , monoblock motor: 7.5 hp, 3-phase , submersible motor: 1 hp, 2-phase , submersible motor: 2 hp, 2-phase , submersible motor: 3 hp, 3-phase , submersible motor: 5 hp, 3-phase , submersible motor: 7.5 hp, 3-phase , submersible motor: 10 hp, 3-phase , submersible pump: 2 hp, 2-phase , submersible pump: 3 hp, 3-phase , submersible pump: 5 hp, 3-phase , submersible pump: 7.5 hp, 3-phase , submersible pump: 10 hp, 3-phase , c-clamp type hdpe pipe (length: 20 feet), diameter: 1.5” , c-clamp type hdpe pipe (length: 20 feet), diameter: 2” , c-clamp type hdpe pipe (length 20 ft), dia 2.5" , c-clamp type hdpe pipe (length 20 ft), dia 3" , t-bend 2.5" , l-bend 2.5" , t-bend 3" , l-bend 3" , end cap 2.5" , washer 2.5" , washer 3" , diesel engine pump 5 hp , diesel engine pump 7.5 hp , hdpe rolled pipe, dia 1.5" , hdpe rolled pipe, dia 2" , hdpe rolled pipe, dia 2.5" , hdpe rolled pipe, dia 3" , plastic nozzle for sprinkler 3/4" , brass nozzle for sprinkler 3/4" , g.i. riser pipe for sprinkler 3/4" , g.i. socket for sprinkler 3/4" , g.i. foot button for sprinkler , g.i. socket 3/4" , covering/cladding material: structure covered with uv-stabilized hdpe / polycarbonate multilayer sheet , screen filter for fogger system , booster pump , temperature meter , 16 mm lateral line , 4-way fogger , exhaust fan (30" dia) , honeycomb pad for cooling system , g.i. round pipe 1" , g.i. round pipe 1.5" , g.i. round pipe 2" , g.i. round pipe 2.5" , iron sieve (for sand) 3x6 ft (with wooden frame) , dhanzyme fertilizer , d.a.p. , n.p.k. , chlorpyrifos 20% ec , fungicide (bavistin powder) , petrol-operated spray pump (20 liters) skid steer loader , gi pan (tagari) – 15-inch , plastic pan (tagari) – 20-inch , shovel (with ms handle) , hand trowel (khurpi) , watering can , pickaxe , crowbar – 25 mm x 5 ft , double-wheel barrow trolley (ms) – size: 600 x 480 x 600 mm , nylon rope – 12 mm dia. (for borewells) , nylon rope – 10 mm dia. (for borewells) , gi pipe – 2.0 inch (for borewell use) , earthworms (species: *eisenia fetida*) , pvc casing pipe – 6-inch , pvc casing pipe – 8-inch , ro water filter (with cooler; capacity: 40 liters) , gi profile strip – length: 4 meters , gi (galvanized iron) zigzag spring , 2-way fogger , polysheet 200 micron, 800 gauge , 40 mm perforated rainpipe (length 100 m) , 40 mm jointer pipe (pvc) , mta 32 mm x 40 mm (pvc) , end cap 40 mm (pvc) , mta cock 32 mm x 40 mm , 45 mm perforated rainpipe (length 100 m) , 2.5" adapter, c-clamp type (hdpe) , 2.5" sprinkler pipe head (hdpe) , 2.5" sprinkler pipe tail (hdpe) , black polythene bag (size 15x25, 250 gauge) , white polythene bag (size 15x25, 400 gauge) , black polythene bag (size 15x25, 400 gauge) , white polythene bag (size 20x30, 400 gauge) , black polythene bag (size 20x30, 400 gauge) , black ldpe sheet , vermicompost bag, 100g, printed (size 22x36 inches; capacity 50 kg) , neem bag, 100g, printed (size 22x36 inches; capacity 50 kg) , green net (shade net) — 50% shade , green net (shade net) — 75% shade , green net (shade net) — 95% shade , chain-link fencing — 1.5 m , chain-link fencing — 2 m , chain-link fencing — 2.5 m , barbed wire , angle iron 50x50x5 mm — 2 m , angle iron 50x50x5 mm — 2.5 m angle iron 50x50x5 mm, 3 mtr , iron rebar (reinforcement bar) 6 mm , iron rebar 8 mm , iron rebar 10 mm , iron rebar 12 mm , m.s. pipe 1"x1" , m.s. pipe 1.5"x1.5" , m.s. pipe 2"x2" , m.s. pipe 2.5"x2.5" , m.s. pipe 3"x3" , cement (bag weight: 50 kg) , sand (for construction) , crushed stone aggregate (40 mm) , crushed stone aggregate (20 mm) , crushed stone aggregate (6 mm) , bricks (kiln-fired) , g.i. profile sheet , vitrified tiles (4"x2") (glossy double charge) thickness 9-10 mm,

CTN :45201075

30 May, 2026 NA

Dindori - Madhya Pradesh

Tender For supply of jalpraday samagri item - pvc pipe 3-inch, pvc socket 3-inch, pvc elbow 3-inch, pvc tee 3-inch, pvc solvent, pvc socket 6-inch, pvc elbow 6-inch, pvc tee 6-inch, rubber 6-inch, leather sheet, gi pipe 2-inch, gi long socket 2-inch, gi nipple 2-inch (0.5 ft), gi nipple 2-inch (1 ft), gi nipple 2-inch (1.5 ft), gi nipple 2-inch (2 ft), gi nipple 2-inch (2.5 ft), gi nipple 2-inch (3 ft), large hacksaw frame, saw blade, ci reflux valve 2-inch, ci valve 3-inch, plastic tank valve 3-inch, tailpiece 3-inch, flange 2-inch, tailpiece 4-inch, tailpiece 6-inch, flange 3-inch, flange 6-inch, hose 3-inch, hose 4-inch, hose 6-inch, nylon rope (12/8), spindle rod 3-inch, spindle rod 4-inch, spindle rod 6-inch, union 3-inch, flange washer 2-inch, flange washer 3-inch, flange washer 4-inch, raw rubber, tape, gi elbow 2-inch, starter (spt) 5 hp, starter (spt) 12.5 hp, panel (spt) 2 hp, 5 hp. 3-core submersible cable (6mm), hdpe coupler, 7.5 hp submersible motor, 7.5 hp submersible motor, 7.5 hp auto-switch, 7.5 hp auto-switch, grips (63, 100, 200, 500 amperes), fuse wire, reducer (2" to 3"), reducer (3" to 4"), union (2-inch), union (3-inch), union (4-inch), drilling machine, grinding machine, pvc pipe (1/2-inch), pvc pipe (3/4-inch), socket (1/2-inch), elbow (1/2-inch), tee (1/2-inch), brass elbow (1/2-inch), brass tee (1/2-inch), cap (1/2-inch), socket (3/4-inch), elbow (3/4-inch), tee (3/4-inch), brass elbow (3/4-inch), brass tee (3/4-inch), cap (3/4-inch), tap (3/4-inch), chain wrench (no. 18), chain wrench (no. 12), chain wrench (no. 24), ring spanner (21-23), ring spanner (18-19), ring spanner (16-17), open-end spanner (21-23), open-end spanner (18-19), open-end spanner (16-17), taparia pliers, large screwdriver, small screwdriver, ammeter, voltmeter, shovel, mortar pan, pickaxe, crowbar, beso, breaker, grinder blade, raincoat, nut & bolt (no. 21, 6-inch), nut & bolt (no. 18, 2-inch), nut & bolt (no. 17). 1/2-inch flange, 2-inch flange, 2.5-inch flange, 3-inch flange, 3-to-2-inch reducer, 3-to-2.5-inch reducer, 14-15mm ring spanner, 12-13mm ring spanner, 14-15mm open-end spanner, 12-13mm open-end spanner, voltage tester, 11 kv gloves, alum, bleaching powder, liquid chlorine, water test kit, 2-inch union, rubber gasket/packing, 2.5-inch flange, 2.5-inch socket, 1.5-inch nipple (1 ft), 6-inch nipple (1 ft), large hammer, 1.25-inch hand pump pipe, hand pump chain, hand pump bearing, hand pump cylinder, brass hand pump upper valve (with rubber), brass hand pump lower valve (with rubber), hand pump axle, water storage tanks (500 l and 1000 l).

CTN :45240952

26 Jun, 2026 NA

Kharagpur - West Bengal

Tender For corrigendum : supply of set of tab washer for main compressor consisting of 02 items having 02 nos in aset as per drg. no. dy.cee/ws/kgp/emu/3512 (item no. 2 & 3 each one no. in a set). [ warranty period: 30 months after the date of delivery ] ]

CTN :45263964

26 May, 2026 NA

Parganas - West Bengal

Tender For spare parts for scania tess veh - 8mm nut with bolt (aps) part no nk, 10mm nut with bolt (aps) part no nk, 12mm nut with bolt (aps) part no nk, 13mm nut with bolt (aps) part no nk, 14mm nut with bolt (aps) part no nk, 16mm nut with bolt (aps) part no nk, 17mm nut with bolt (aps) part no nk, screw (aps) part no nk, screw with nut 1.5" (aps) part no nk, sleeving plastic 4mm aps part no y3-niv, sleeving plastic 6mm aps part no y3-niv, sleeving plastic 10mm aps part no y3-niv, sleeving plastic 20mm aps part no y3-niv, lock tight 510 (50ml) tube part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, self locking nylon cable zip type 2.5x10 part no nk, battery terminals brass (heavy duty) aps part no nk, screw 4mmx20mm 100pcs part no nk, 6mm bolt with nut & washer 30mm length part no nk, aluminium blind rivet 40mm part no nk, aluminium blind rivet 3/4" (large head) part no nk, aluminium blind rivet 3/4" part no nk, aluminium blind rivet 1 inch part no nk, aluminium blind rivet 1/2" part no nk, counter shunk screw aps part no nk, star head screw part no nk, washer assorted part no nk

Tab Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government