Latest table frame Tenders | Government table frame Tenders

Central Government/Public Sector

CTN :45538565

19 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of table frame grids for stako machine drg: drg. no. 54/mtc/cnc-v/0148-001 rev: 01. note: 01.material grade mild steel conforming to is 2062 (latest) 02 fabrication tolerances asper rcf document no. mdg0008 version 02 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45555522

22 Jun, 2026 NA

Nasikcity - Maharashtra

Tender For supply of study table with metal frame (approx. size 800 mm x 600 mm x 750 mm) specification :- intermediate legs support at bottom, ms hollow pipe size 25 mm x 25 mm / 25 mm x 50 mm, table frame-black powder coated , table top made of 18 mm bwr grade plywood with laminate as approved by consignee.[ warranty period: 12 months after the date of delivery ] ]

CTN :45450044

13 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For corrigendum : repair and overhauling service - as per scope of work; as per scope of work; yes; buyer premises; for towable gcu turn table front axle assembly qty-03 nos at ma , supply of items; 1 tow handle as per sample mild steel, 2 bracket as per sample mild steel, 3 main axle as per sample mild steel, 4 turn table frame as per sample mild steel.

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45260577

19 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of metallic bench with wooden plank on top , a shaped metallic structures , v shaped metallic structures , t shaped metallic structures , h shaped metallic structures , y shaped metallic structures , l shaped metallic structures , u shaped metallic structures , plus shaped metallic structures , metallic circles , metallic semi circles , metal poles with circular or square plate on top , goal post shaped metallic structures , circular disc attached to poles with chains , metallic drum 1mx60cm , small swings , miscellaneous metallic structures as per diagrams , inclined ramp with support four ramps on one support , figure 8 structure metallic , spider web structure with ropes , ramp and slide set of 4 structures , barrels , balancing beams , screen jump , rope bridge , tarzan swing goal post with platform , double platform set , double ditch goal post , commando walk , tiger leap goal post with platform , rope climbing goal post , grout points , cement pcc blocks , gst 18 percentage ) /bid number : gem/2026/b/7427728 * /dated: 20-05-2026 & & / bid document 1 / 31

Central Government/Public Sector

CTN :45423244

10 Jun, 2026 NA

Multi City - Multi State

Tender For supply of study table with metal frame , intermediate leg support at bottom, ms hollow pipe size - 25x25 mm /25x50 mm, table frame black powder coated , table top made of 18 mm bwr grade plywood with laminate [ warranty period: 12 months after the date of delivery ] ]

CTN :45224800

01 Jun, 2026 NA

Muzaffarnagar - Uttar Pradesh

Tender For bid to ras supply of wooden planks for flexible duck board jamoya size 150x38x900mm , wooden planks for flexible duck board jamoya size 125x38x900mm , steel pin lock setting for main and ramp girder of kruppman bridge , buggle strap for main and ramp girder of kruppman bridge , rubber sleeve for coupling nut of kruppman bridge , sleeve clamp small for coupling nut of kruppman bridge , sleeve clamp large for coupling nut of kruppman bridge , butt strap for h frame

CTN :45326592

09 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of equipments for ece department - function generator frequency range: 0.1 hz to 5 mhz display: 4 to 6 digit led display output waveforms: sine, triangle, square, pulse, ramp . amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, strain gauge trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., temperature measurement kit sensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc). display: 3 digit led/lcd digital display (typically 200 mv fsd). temperature source: portable water kettle or heater block. signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation. test points: multiple 2 mm / 4 mm banana sockets for monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntc thermistor probe, k-type thermocouple probe, patch cords and user manual., cathode ray oscilloscope bandwidth: dc to 30 mhz (-3 db) - sensitivity: 1 mv/div to 5 v/div - display modes: ch1, ch2, dual (chop/alt), add, sub - timebase: 0.2 s/div to 0.5 s/div (essential for slow bio-signals) - magnification: x 10 sweep magnifier - triggering: alt triggering, auto, norm, - tv-v/h with source selection (ch1, ch2, line, ext). - input impedance: 1 mohm || 25pf - included accessories: two 60 mhz passive probes, power cord, and user manual

corporations/Associations/Others

CTN :45028341

12 May, 2026 NA

Multi City - Multi State

Tender For auction sale of fire ext 22.5 kgs trolley mtd,fire ext 50 kgs trolley mtd,tarpauline old,gen set 15 kva ser no sw-0706020,gen set 11.2 kva two wheeled trolley mtd,eng assy tatra eng no 005834 & 4595,eng assy,steel scrap,mine plugh (steel scrap),gen set 3.5 kva model deg-5000,gear box o/s,mt scrap,steel scrap (table, camp chair etc),alluminium scrap,steel scrap (mine plugh, ramp loading),eng assy o/s,mt scrap (load carrier),computer o/s,wooden scrap,jack o/s,canvas old(d/hose pipe etc),helmet o/s,mine plug,case & cradle,steel scrap (concentina coil & barbed wire),tarpaulin old,tarpauline old,fire ext o/s,fire ext 25 kgs,blanket o/s

Table Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others