Latest table panel Tenders | Government table panel Tenders

State Government

CTN :45558196

22 Jun, 2026 NA

Medininagar - Jharkhand

Tender For supply of list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractor's profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source , fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. , close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel , aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 to

State Government

CTN :45562938

22 Jun, 2026 NA

Ranchi - Jharkhand

Tender For stone boulder of size 150 mm and below at source quarry supply of quarried stone 150-200 mm size for hand broken at source quarry boulder with minimum size of 300 mm for pitching at source quarry coarse sand i) at source coarse sand ii) at source fine sand at source quarry moorum at source quarry gravel/quarry spall at source quarry granular material or hard murum for gsb works at source quarry fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant filter media/filter material as per table 300-3 (mort&h specification) at crusher. close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher. close graded granular sub-base material 37.5 mm to 9.5 mm at crusher. close graded granular sub-base material 26.5 mm to 9.5 mm at crusher. close graded granular sub-base material 9.5 mm to 4.75 mm at crusher. close graded granular sub-base material 9.5 mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 2.36mm at crusher. close graded granular sub-base material 4.75mm to 75 micron at crusher. close graded granular sub-base material 2.36 mm & below at crusher. stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher. coarse graded granular sub-base material 2.36 mm & below at crusher. coarse graded granular sub-base material 4.75 mm to 75 micron at crusher. coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher. coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher. coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher. coarse graded granular sub-base material 53 mm to 26.5 mm at crusher. aggregates below 5.6 mm at crusher. aggregates 22.4 mm to 2.36 mm at crusher. aggregates 22.4 mm to 5.6 mm at crusher. aggregates 45 mm to 2.8 mm at crusher. aggregates 45 mm to 22.4 mm at crusher. aggregates 53 mm to 2.8 mm at crusher. aggregates 53 mm to 22.4 mm(grade iii) at crusher. aggregates 63 mm to 2.8 mm at crusher. aggregates 63 mm to 45 mm (grade ii)at crusher. aggregates 90 mm to 45mm(grade i) at crusher. aggregates 10 mm to 5 mm at crusher. aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher. aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher. aggregates 13.2 mm to 5.6 mm at crusher. aggregates 13.2 mm to 10 mm at crusher. aggregates 20 mm to 10 mm at crusher. aggregates 25 mm to10 mm at crusher. aggregates 19 mm to 6 mm at crusher. aggregates 37.5 mm to 19 mm at crusher. aggregates 37.5 mm to 25 mm at crusher. aggregates 6 mm nominal size at crusher. aggregates 10 mm nominal size at crusher plant. aggregates 13.2/12.5 mm nominal size at crusher plant. aggregates 20 mm nominal size at crusher plant. aggregates 25 mm nominal size at crusher. aggregates 40 mm nominal size at crusher. crushing of stone aggregates (gsb crusher run) ac pipe 100 mm dia acrylic polymer bonding coat alluminium paint aluminium alloy plate 2mm thick aluminium alloy/galvanised steel aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm barbed wire bearing (cost of parts) bearing (cast steel rocker bearing assembly of 250 tonne ) road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision) bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation) taking elastomeric bearing of size 500 x 400 x 96mm, overall volume=19200 cubic cm bearing (forged steel roller bearing of 250 tonne) bearing (pot type bearing assembly consisting of a metal piston supported by a disc, pt

State Government

CTN :45562939

22 Jun, 2026 NA

Hazaribag - Jharkhand

Tender For list of approved construction materials for the preparation of schedule of rates for the year 2026, basic rates of which to be approved by the state level schedule rate committee (materials should conform to relevant b.i.s., mord and mort&h specifications). the rates will be inclusive of royalty but exclusive of all taxes, g.s.t,overhead and contractors profit. "rates are at source"quarry/ crusher plant. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road st

State Government

CTN :45558189

22 Jun, 2026 NA

Chaibasa - Jharkhand

Tender For the quotation is invited to ascertain and assess the rate of materials as per with lowest market rate for framing of schedule of rate. - stone boulder of size 150 mm and below at source quarry, supply of quarried stone 150-200 mm size for hand broken at source quarry, boulder with minimum size of 300 mm for pitching at source quarry, coarse sand i) at source, coarse sand ii) at source, fine sand at source quarry, moorum at source quarry, gravel/quarry spall at source quarry, granular material or hard murum for gsb works at source quarry, fly ash conforming to is:3812 (part ii & i) at hmp plant/batching plant/crushing plant, filter media/filter material as per table 300-3 (mort&h specification) at crusher., close graded granular sub-base material 53 mm to 9.5 mm/4.75mm at crusher., close graded granular sub-base material 37.5 mm to 9.5 mm at crusher., close graded granular sub-base material 26.5 mm to 9.5 mm at crusher., close graded granular sub-base material 9.5 mm to 4.75 mm at crusher., close graded granular sub-base material 9.5 mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 2.36mm at crusher., close graded granular sub-base material 4.75mm to 75 micron at crusher., close graded granular sub-base material 2.36 mm & below at crusher., stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at crusher., coarse graded granular sub-base material 2.36 mm & below at crusher., coarse graded granular sub-base material 4.75 mm to 75 micron at crusher., coarse graded granular sub-base material 4.75mm to 2.36 mm at crusher., coarse graded granular sub-base material 9.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5mm to 4.75 mm at crusher., coarse graded granular sub-base material 26.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 37.5 mm to 9.5 mm at crusher., coarse graded granular sub-base material 53 mm to 26.5 mm at crusher., aggregates below 5.6 mm at crusher., aggregates 22.4 mm to 2.36 mm at crusher., aggregates 22.4 mm to 5.6 mm at crusher., aggregates 45 mm to 2.8 mm at crusher., aggregates 45 mm to 22.4 mm at crusher., aggregates 53 mm to 2.8 mm at crusher., aggregates 53 mm to 22.4 mm(grade iii) at crusher., aggregates 63 mm to 2.8 mm at crusher., aggregates 63 mm to 45 mm (grade ii)at crusher., aggregates 90 mm to 45mm(grade i) at crusher., aggregates 10 mm to 5 mm at crusher., aggregates 11.2 mm to 0.09 mm (key aggregate type b) at crusher., aggregates 13.2 mm to 0.09 mm (key aggregate type a) at crusher., aggregates 13.2 mm to 5.6 mm at crusher., aggregates 13.2 mm to 10 mm at crusher., aggregates 20 mm to 10 mm at crusher., aggregates 25 mm to10 mm at crusher., aggregates 19 mm to 6 mm at crusher., aggregates 37.5 mm to 19 mm at crusher., aggregates 37.5 mm to 25 mm at crusher., aggregates 6 mm nominal size at crusher., aggregates 10 mm nominal size at crusher plant., aggregates 13.2/12.5 mm nominal size at crusher plant., aggregates 20 mm nominal size at crusher plant., aggregates 25 mm nominal size at crusher., aggregates 40 mm nominal size at crusher., crushing of stone aggregates (gsb crusher run), ac pipe 100 mm dia, acrylic polymer bonding coat, alluminium paint, aluminium alloy plate 2mm thick, aluminium alloy/galvanised steel, aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable class-b type iv, road aluminium stud with micro prismatic lens reflectors (with shank) 100 x 100 mm, barbed wire, bearing (cost of parts), bearing (cast steel rocker bearing assembly of 250 tonne ), road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of morth (5th revision), bearing (elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation), taking elastomeri

Central Government/Public Sector

CTN :45555889

06 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of bright steel rounds 40mm dia cold drawn to specn.is:9550-2001 (surface quality as per tab.5 of class.3)with the following chemical and mechanical properties. chemical composition: sl.no. description max% 1. carbon 0.23 2. manganese 1.5 3. sulphur 0.05 . 4. phosphorus 0.05 5. silicon 0.4 carbon equivalent max.0.42% mechanical properties:1. tensile strength 510-740 (min)mpa 2. elongation(min) 15% tolerance on diameter shall be h11 as per table 2 to is:9550-2001. the bright steel rounds shall be supplied in 3 to 5 metres length with maximum 10% shorts down to 1 metre. marking and colour coding shall be as per icf/md/specn.113.issue status 01. rev.00 with amendment nos 01 and 02. the supplier shall submit test certificate for each heat which will contain both physical and chemical properties. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45580929

07 Jul, 2026 39.07 Lacs

Midnapore - West Bengal

Tender For supply of metal shelving racks (adjustable type) conforming to is 1883 (v2) (q2) , modular table / meeting table / centre table (v2) (q2) , sofa (v3) (q2) , steel almirah / cabinets (v4) (q2) , chair for general purpose (q2) , executive table (v4) (q2) , computer table (v3) (q2) , revolving chair (v5) (q2)

State Government

CTN :45472016

22 Jun, 2026 3.00 Lacs

Ranchi - Jharkhand

Tender For corrigendum : supply of executive table (v4) (q2) , revolving chair (v5) (q2) , chair for general purpose (q2) , steel almirah / cabinets (v4) (q2) , pin up notice board (v2) (q3)

State Government

CTN :45564848

20 Jun, 2026 41.83 Lacs

Rangat - Andaman And Nicobar Islands

Tender For supply of furniture and other items for newly constructed working womens hostel at mithila, rangat - recall. - providing and placing in specified rooms single size wooden bed/cot with wooden planks on top including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge.(single size cot of category ii (a) hardwood). size: 6 1/2 x 4 feet, providing and placing in specified rooms good quality mattress (5 inch thick) for single size bed/cot including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. (reputed brand: kurl on, century or equivalent), providing and placing in specified rooms office tables including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. (steel table with veneered wood on top of reputed brand)size: 1.50x0.90x0.75 mtr, providing and placing in specified rooms executive chairs including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. (reputed brand), providing and placing in specified rooms ornate chairs including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. (nilkamal, supreme or equivalent brand), providing and placing in specified rooms upholstered sofa set (3+2 seater) with teapoy including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. (category i padauk sofa set) (finished dimension:3 seater - 1.92x0.87x0.92 mtr2 seater - 1.47x0.87x0.92 mtr, providing and placing in specified rooms stainless steel 8 seater dining table with built-in steel chairs/stools including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge., providing and placing in specified rooms plastic dining chairs including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. (make: nilkamal, supreme or equivalent brand), providing and placing in specified rooms big size table including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. (steel table with veneered wood on top of good quality), providing and placing in specified rooms plastic chairs including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. (make: nilkamal, supreme or equivalent), providing and placing in specified rooms washing machine including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge. semi automatic, 10 kg capacity (whirlpool, samsung, lg or equivalent), providing and placing in specified rooms kitchen utensils including loading, unloading, labour and transportation charges complete as per the direction of engineer-in-charge., cup & saucer (set of 6) (la opala, cello or equivalent), glass tumbler (set of 6) (treo, borosil or equivalent), dinner set (la opala, cello or equivalent), aluminium degchi 10 ltr (good quality), aluminium kadai 5 ltr (good quality), stainless steel full plates (good quality) (set of 6), stainless steel big serving spoons (good quality) (set of 6 piece), stainless steel rice spoons (good quality), stainless steel trays (good quality), providing and fixing nickel plated m.s. pipe curtain rods with nickel plated brackets:, 20 mm dia (heavy type), providing and fixing in specified rooms good quality jacquard cloth door curtains including loading, unloading, transportation and labour charges, etc. complete as per the direction of engineer-in-charge.door size: 1.00x2.10 mtr, providing and fixing in specified rooms good quality jaquard cloth window curtains including loading, unloading, transportation and labour charges, etc. complete as per the direction of engineer-in-charge.window size: 1.50x1.20 mtr, providing and placing in spe

State Government

CTN :45410585

19 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of stainless steel dining table with fixed chair (q2)

Central Government/Public Sector

CTN :45555019

24 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of ms. forged steel hex. reduce bush to size 32 mm x 25mm to is 1239/2011 part-2 table 27.clause 9.1. thread shall be made as per is-554. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Table Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors