Latest tachometer drive shaft Tenders | Government tachometer drive shaft Tenders

State Government

CTN :40049068

14 May, 2025 NA

Birbhum - West Bengal

Tender For supply, delivery and installation of different electro-mechanical accessories at loba pwss under bolpur mechanical division, phe,dte. - supply and delivery at site of following vertical submersible pumping machinery directly coupled with wet winding type suitable size submersible motor with following specification: method of starting : dol / s/d, shaft-s.s, impeller- s.s / crome steel / gm, outlet - 80/100 mm dia motor : operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2900 rpm, method of starting : s/d(make : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor.) ( n.b : manufacturers test certificate along with charecteristics curve and gurantee certyificate have to be submitted at the time of delivery.), a)discharge (q) : 20m /hr.head (h) : 36 mtrs., b) discharge (q) : 27m /hr.head (h) : 42 mtrs., c) discharge (q) : 27m /hr.head (h) : 51 mtrs., d) discharge (q) : 30m /hr.head (h) : 57 mtrs., installation of submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of eic., add: gst @ 18% on sum of item no: 1.00 to 2.00, add: cess @1% on sum of item no. 1.00 to 3.00

Central Government/Public Sector

CTN :40062102

29 Apr, 2025 NA

Mandal - Gujarat

Tender For tmpl/pur/rc/jhonson pump spares/718/339 - ccr modelsmodel -1: ccr 40c-160 r1 m2 l3, tag no: 7p 1 a/b/c, application: unclarified pregnant solution pumps (upl) pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, gasket/sealing ring, male connector, pipe, extension piece, stud s4, nut, washer, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), leg/ bracket support, gasket (pump casing), plug, plug, sealing ring/ gasket, allen screw/bolt, bearing housing, bearing cover, bearing cover, oil baffle/catcher, oil filling plug (pp), oil leveler, plug (magnetic drain plug), gasket (brg. cover), grub screw, pump shaft, coupling key, spalsh ring, internal circlip, dist. sleeve, lock nut, lock washer, allen bolt, allen bolt, model -2: ccr 80-250 r1 m2 l3, tag no: 7p 9a/b/c/d, application: filtrate pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, pipe, male connector, extension piece, stud s4, nut, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), wearing ring, leg/ bracket support, gasket (pump casing), plug, plug, allen screw/bolt, bearing housing, bearing cover, oil baffle/catcher, oil filling plug (pp), oil leveler, plug (magnetic drain plug), gasket (brg. cover), grub screw, pump shaft, coupling key, spalsh ring, internal circlip, dist. sleeve, lock nut, lock washer, allen bolt, allen bolt, washer, model -3: ccr 50c-160 r1 m2 l3, tag no: 7p 7a/b, application: clarified pregnant solution pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, pipe, male connector, extension piece, stud s4, nut, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), leg/ bracket support, gasket (pump casing), plug, plug, allen screw/bolt, bearing housing, bearing cover, oil baffle/catcher, oil filling plug (pp), oil leveler, plug (magnetic drain plug), gasket (brg. cover), grub screw, pump shaft, coupling key, spalsh ring, internal circlip, dist. sleeve, lock nut, lock washer, allen bolt, allen bolt, washer, model -4: ccr 80-160 r1 m2 l3, tag no: 7p 3a/b, application: pre coat material solution feeding pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, pipe, male connector, extension piece, stud s4, nut, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), wearing ring, leg/ bracket support, gasket (pump casing), plug, plug, allen screw/bolt, bearing housing, bearing cover, oil baffle/catcher, oil filling plug (pp), oil leveler, plug (magnetic drain plug), gasket (brg. cover), grub screw, pump shaft, coupling key, spalsh ring, internal circlip, dist. sleeve, lock nut, lock washer, allen bolt, allen bolt, washer, model -5: ccr 80c-200 r1 m2 l3, tag no: tag no: 8p- 5a/b & 8p-6a/b, application: clarified hot liquor transfer pumps & caustic feed pumps, shaft sleeve (ss 431), smothering bush/throttle bush, mechanical seal, mech. seal cover (steel), dowell pin m2, gasket m2, socket head plug, gasket (shaft sleeve), gasket (impleller), socket head plug m2, pipe, male connector, extension piece, stud s4, nut, impeller cap nut, key (impeller), pump casing/ housing, stuffing box, impeller ss316, impeller (wcb), wearing ring, leg/ bracket support, gasket (pump casing), plug, plug, allen screw/bolt, bearing housing, bearing cover, oil

Central Government/Public Sector

CTN :40066033

28 Apr, 2025 59.24 Lacs

Nagpur - Maharashtra

Tender For supply of spares for flowmore 200lps x 100 m head hsc csd sale and flowmore pump 250 x 150 2 stage - rotating assembly part no rau5826120011685001 , pump shaft en8 c40 part no 34 , bearing housing nde moc ci part no 20 , impeller cast steel part no 11 , key for impeller moc en 9 part no 26 , wearing ring casing bronze is 318 ltb part no27 , shaft sleeve bronze is 318 ltb ii part no 15 , stuffing box bushing ci part no 9 , gland half bronze 1 stage part no 17052979206 , stud bolt with nut gland part no f5826170529792030 , bearing housing de ci is 210 fg 260 part no 01 , cover for brg housing moc ci part no 32 , shaft collar part no f5826170529792018 , sleeve nut and lock nut de steel 1 stage part no 17052979205 , sleeve nut and lock nut for sleeve nde part no 16 , water seal ring part no f582617052979208 , pump shaft cs 40c8 part no p5932a200746433001 , bearing bracket housing de ci part no p5932a200746433002 , collar inter stage bronze part no p5932a200746433009 , bush inter stage part no 9 , wearing ring casing bronze part no p5932a200746433017 , shaft sleeve s s 410 part no p5932a200746433018 , stuffing box bushing part no p5932a200746433019 , studbolt with nut casing to gland part no p5932a200746433021 , bearing bracket housing nde ci part no p5932a200746433022 , cover for brg hose nde ci part no p5932a200746433028 , shaft collar steel part no p5932a200746433026 , sleeve nut nde steel part no p5932a200746433029 , spr dowel sleeve part no p5932a200746433042 , water seal ring bronze part no p5932a200746433044 , cover plate outer brg cover nde part no p5932a200746433046 , wearing ring impeller part no p5932a200746433048 , complete rotating assembly part no p5932a200746433056 , gland half part no p5932a200746433020 , nut part no fm590170529799028 , washer part no fm590170529799027

Central Government/Public Sector

CTN :40065911

08 May, 2025 NA

Angul - Odisha

Tender For supply of spares for sct 200 58 2 pumps under pac - impeller ist stage for sct 200 58 2 pumpone to one part no 157bronze , impeller 2nd stage for sct 200 58 2 pumpone to one part no1580001 , pump shaft ss one to one part nosct20058218000251 , shaft sleeve bronze one to one part no sct2005823100001 , casing wear ring ss one to one part no sct20058219000232 , gland ss one to one part no sct20058222300232 , gland plate one to one part no sct200582cf8m224 , stuffing box packing one to one part no sct200582ch3116430 , interstage ring ss one to one part no sct20058220400232 , inter stage bush bronze one to one part no sct2005823130001 , split lantern ring bronze one to one part no 2270001 , ball bearing steel 6218one to one part no sct2005822600001 , key impeller one to one part no 3200001 , key coupling one to one part no 3210001 , bearing housing de for sct 200 58 2 pump one to one part no 2401ci , bearing housing c i nde for sct200 58 2 one to one part no 2402ci , ball bearing steel 7218 one to one part no sct2005822600001

Central Government/Public Sector

CTN :40078000

12 May, 2025 NA

Angul - Odisha

Tender For supply of impeller 1st stage one to one part no sct15048157,impeller 2st stage one to one part no sct15048158,pump shaft steel one to one part no 18000251mc,casing wear eing ci one to one part no 190,bearing housing de nde one to one part no 27000011mc,shaft sleeve de ss one to one part no 31000251mc,shaft sleeve nde ss one to one part no 31701251mc,inter stage bush one to one part no sct15048313,round lock nut one to one part no 33600053mc,locking washer one to one part no sct15048415,eye bolt one to one part no 30300063mc,impeller key one to one part no sct15048320,coupling key one to one part no sct15048321,set of o ring rubber one to one part no sct15048ssor1,inter stage ring one to one part no sct15048204

corporations/Associations/Others

CTN :39873315

21 Apr, 2025 NA

Cuddalore - Tamil Nadu

Tender For corrigendum : tender for supply of mill pin bush spare kx-d170 flexible coupling hc to db output shaft , nntps kx d170 spare bolt m16x65mm 10.9 grade din en iso 4014 , nntps mill pin bush spare kx d135 flexible coupling mtr to hc input shaft , nntps kx d135 spare bolt m12x60mm 10.9 grade din en iso 4017 , nntps mill db lop coupling rotex 24 in steel with finished bore keyway , nntps-mill db lop spider rotex 24 for coupling

Central Government/Public Sector

CTN :39964818

21 Apr, 2025 NA

Chhindwara - Madhya Pradesh

Tender For corrigendum : supply of enclosed impeller, cfm8 part no rkb15034kcf8m151 , wear ring suction side cf8m part no19000 , wear ring delivery side cf8m part no19100 , shaft sleeve suction side, aisi 316 part no aisi316310 , shaft sleeve delivery side, aisi 316 part no aisi316311 , distance sleeve, ss part no317ss , bearing lock nut moc c 20 part no336 , round lock nut part no rkb15034kc203361 , inter stage bush for d.w.g.v - cf8m part no35500 , interstage bush for diffuser with guide part no3550001 , stage casing, cf 8m part no124 , bearing housing unit std part no subbhu34k , set of o rings 5 stage rubber part no rkb15034krubberssor15 , set of fastners moc std part no ssof1 , hex socket grub screw moc steel part no 986 , set of keys 5 stage aisi-316 part no rkb15034k5aisi316ssok1 , oil seal de nde part no5000001 , pump shaft 5 stage, aisi 316 part no5stg180 , suction casing cf 8m part no rkb15034kcf8m113 , compression spring steel part no rkb15034ksteel483 , lock washer moc steel part no 415

Central Government / Public Sector

CTN :39896870

25 Apr, 2025 NA

Begusarai - Bihar

Tender For corrigendum : supply of holder pn 17.1 , item340-5629929013-flange pn 11 , item350-5629929023-flange pn 11.1 , item360- 5629930018-complete cartridge,drg no-115459 , item370-5629930903-back up ring, pn-44, ss 316 , item380-5629930933-retaining ring, pn-54.2, ss 316 , item390-5629932103-hex.hd.bolts, pn-40.1, ss 304 , item400-5629935113-lock pin, pn-5.1, ss 316 , item410- 5629935403-set screw, pn-57, ss 316 , item420- 5629935413-set screw, pn-57.1, ss 316 , item430- 5629935423-set screw, pn-57.2, alloy steel , item440- 5629935553-cap screw, pn-40, ss 304 , item450- 5629936653-coil spring, pn-16, alloy c-276 , item460- 5629936663-coil spring, pn-16.1, alloy c-276 , item470- 5629936673-coil spring, pn-16.2, hast-c , item480- 5629937253-spring holder, pn-17, ss 316 , item490- 5629937263-spring holder, pn-17.1, ss 316 , item500- 5629937353-adapter, pn-172, ss 316 , item510- 5629939013-flange, pn-11, ss 316 , item520- 5629939023-flange, pn-11.1, ss 316 , item530- 5632910013-comp seal cart 1.750 pto, drg 2h-154824 , item540-5632910091-comp.unit,unxexn13743 , item550-5632910941-composite ring,unrh38r457u , item560-5632911101-gland ring,un154g175c31 , item570-5632911661-shaft packing,un562fhy47uu , item580-5632912421-throttle bush,uc9670cs4750 , item590-5632912731-collar,unet45porgf , item600- 5632913531-stationary face,uny5fq0m33 , item610- 5632913541-rotating face,unk43t750333 , item620- 5632915131-drive pin,unefj432vr473 , item630- 5632915401-set screw,unmkau8841413 , item640- 5632916021-stub sleeve,un98207ssm135 , item650- 5632916041-sleeve,un141twgc31,pn10 , item660- 5632916611-spring pin,unew56d44523h , item670- 5632916621-spring,unrhjrq5488i , item680- 5632917301-insert mounting,un 568330gu , item690- 5632970981-retaining ring,un 668828db , item700- 5632970991-retainer,un4n42708db , item710- 5632972241-flange bush,un 76370y3r2375 , item720- 5632972701-drive collar,un 833121db , item730- 5632973121-inner flange,un c0299880db-q1 , item740- 5632973501-st. face,un 23295k432375 , item750- 5632973511-st. face,un 23296k432375 , item760- 5632973521-rot. face,un 76368y3r2375 , item770- 5632973531-rot. face,un 76369y3r2375 , item780- 5632975421-cap screw,un 4n01752nd , item790- 5632975461-pumping screw,un c0134549db , item800- 5632976001-shaft sleeve,un 3r93430dbc31 , item810- 5632979021-outer flange,un 159649gge2125c31 , item820-5633971123-auxilary gland pn 8 , item830- 5633979013-flange, pn 11 , item840-5638802403-insert pn-2 silcar-1 , item850-5638803313-lockring pn-rr , item860-5638805103-rot face pn-15 , item870- 5638805403-seal ring pn-3 , item880-5638805413- sleeve pn-10 , item890-5644970208-complete cartridge 2.753,2h-152804 , item900-5650219001- flange,un101570gge3125c31 , item910-5650901163- 568227gu 2.125 viton o-ring , item920-5650901633- 568235gu 3.1253.00 viton rotface gkt , item930- 5650910913-mkax8840432 set screw a200 , item940- 5650912643-mvsr2250333 2.125 viton rot face gasket , item950-5650912693-mvsr2500333 2.252.1252.5 viton pkg , item960-5650913753-mvvr2875333 3.000 viton adapter gasket , item970-5650915723-sb100x515 2.7503.000 snap ring , item980-5650915733-sb105x515 bid details/ 2 / 79 2.8753.000 snap ring , item990-5669039001-lock pin 316ss,un4r55650db , item1000-5260510013- mech.seal,fsl,pt , item1010-5248142703-drive collar,5u4x,fsl,position no 58 , item1020- 5248145423-set screw,5u4x,fsl,position no 57 , item1030-5248145403-set screw,5u4x,fsl,position no57.1 , item1040-5248145413-set screw,5u4x,fsl,position no 57.2 , item1060- 5248146613-spring holder,5u4x,fsl,position no 17 , item1070-5248164103-seat gasket,fsl,5a9x5a9x , item1080-5248164113-rotary face gskt,fsl,5a9x5a9x , item1090-5248164123-seat gasket,fsl,5a9x5a9x , item1100-5248169043-gasket ,fsl,5a9x5a9x , item1110- 5248162363-flange bushing,fsl,5a9x5a9x , item1120- 5248165403-set screw,fsl,5a9x5a9x , item1130- 5248165423-set screw,fsl,5a9x5a9x , item1140- 5248165673-seal face,fsl,5a9x5a9x , item1150- 5248166613-coil spring,fsl,5a9x5a9x , item1160- 52481

CTN :39752787

21 Apr, 2025 NA

Nagpur - Maharashtra

Tender For corrigendum : supply of external circlip type-a for 55mm shaft. dimensions, tolerance and hardness as per is 3075 part 1. , external circlip type-a for 30mm shaft. dimensions, tolerance and hardness as per is 3075 part 1. , external circlip type-a for 35mm shaft. dimensions, tolerance and hardness as per is 3075 part 1. , tension spring for hmt as-32 machine material- spring steel, hardness-48 hrc, 3.2 mm sire, od-31mm, nu , ball screw assembly for x-axis of hmt dt-40 cnc machine as per hmt drawing no. 3210-2196-3 or ofaj d , compression spring for hmt ash 190 machine spindle assly. material: spring steel, hardness: 48 hrc, , thrust ball bearing nsk 51124 mp6, machined brass cage, tole rance to class p6 size 120 x 155 x 25mm , single row needle roller bearing with machined rings, with flanges, without inner ring skf rna-4903. , shell type needle roller caged bearing iko ba-1416z. or equivalent of other reputed make with fitmen , needle roller cage bearing iko kt-40x48x20. or equivalent of other reputed make with fitment and per , inner ring for needle roller bearing skf ir-35x40x20. or equivalent of other reputed make with fitme , internal circlip type-b for 55mm bore. dimensions, tolerance and hardness as per is 3075 part 2. , single direction thrust ball bearing skf- 51205 size: 25x27x 47x15mm. or equivalent with fitment and , double row cylindrical roller bearing no. skf- nn-3017 amsp. size: 85 x 130 x 34mm (parallel bore) . , double row cylindrical roller bearing no. fag- nnu 4920 sk. m. sp. size- 100 x 140 x 40mm (taper bore

CTN :39958362

29 Apr, 2025 NA

Birbhum - West Bengal

Tender For procurement of spares for roller screen at stg-1 chp-mm deptt, bktps. - shaft,roller for eccentric disc for rollerscreen drg. no. m03118/00,roller screen size-2000 mm x 4650 mmadditional data:shaft overall length- 2312 mm , overall dia- 85 mm,material -en19.reference departmentmental drawing no. -bktps/chp-mm-1/rs/e05/40., seal labyrinth of bearing housing for roller scr chp,stage-iadditional data:material - mild steel.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/e05/11, housing non drive end bearing for rollerscreen chp,stage-iadditional data:material - mild steel.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/e05/34, housing drive end bearing for roller screen chp,stage-iadditional data: material - mild steel.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/e05/35, spacer,od-110 mm,id- 65 mm,length- 17 mmfor roller shaft assembly of roller screenadditional data:material - en 8.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/e05/143-148, spacer,od-110 mm,id- 65 mm,length- 40 mmfor roller shaft assembly of roller screenadditional data:material - en 8.reference departmentmentaldrawing no. - bktps/chp-mm-1/rs/e05/143-148, spacer,od-115 mm,id- 85 mm,length- 88 mmfor roller shaft assembly of roller screenadditional data:material - en 8.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/e05/143-148, spacer,od-115 mm,id- 85 mm,length- 43 mmfor roller shaft assembly of roller screenadditional data:material - en 8.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/e05/143-148, spacer,od-115 mm,id- 85 mm,length- 65 mmfor roller shaft assembly of roller screenadditional data:material - en 8.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/e05/143-148, spacer,od-110 mm,id- 85 mm,length- 20 mmfor roller shaft assembly of roller screenadditional data:material - en 8.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/e05/143-148, grub screw socket head for roller screensize:-m16x30additional data:ht, grade - 10.9, washer,plain for bevel pinion for roll bodyshaft of roller screen #additional data:size: 60 mm x 18 mm x 5 mm, material: mild steel., gear bevel with flange $for roller screeneleconadditional data:material - en 24.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/m06/283, gear bevel without flange $for roller screen eleconadditional data:material - en 24.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/m06/284, pinion,bevel of roll body shaft for rollerscreen elecon elecon #additional data:material - en 24.reference departmentmentaldrawing no. -bktps/chp-mm-1/rs/m06/315, internal circlip(90x3) $for roller screen, lock nut,km-10 for roller scradditional data:for spherical roller bearing 22210., lock washer mb-10additional data:for spherical roller bearing 22210., o-ring,size: 99.2x5.7 #additional data: cord- dia 6 mm x id 99 mm ( nitrile rubber) for open end bearing houseing of roller shaft assembly.

Tachometer Drive Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors