Latest tail end shaft Tenders | Government tail end shaft Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45301090

26 May, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of bottom ash hopper and feed gate related spares in unit-3 coh at ahp 210mw, cstps, chandrapur. - ahp basys fdgate guide angle, bhel seal trough flushing nozzle small, ahp basys hop hopper flushing nozzle, ahp basys cg chamber glass, hose,flex ss corrugat,1/2" bsp(f) l 0.5m, ss corrugated 1/2" bsp (f) l 0.7 m, ball valve cs comp asly size-25 mm, body cs complete ball valve 15 mm, ball body cs comp vlv 1 / 2", ball valve cs comp asly size-50 mm, lubricant, coolant audco sealant 731-a, lubricant, coolant audco sealant 731-b, lubrcnt grease audco sealant 731-d, nut bolt for 200 nb sleeve, sleeve coupling 200 nb ms coupling set, shaft sleeves set complete

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

State Government

CTN :45289480

30 May, 2026 NA

Palamau - Jharkhand

Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

Central Government/Public Sector

CTN :45303064

02 Jun, 2026 NA

Wani - Maharashtra

Tender For providing of custom bid for services - repairing of drive shaft and tail end shaft of secondary chain conveyor installed in chp of ukni ocm wna

CTN :45305462

16 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of ecp bulk acid unloading pumps and bulk acid transfer pumps spares for regular and breakdown maintenance of the equipment in sd-i - casing o ring, neophrene, p.no.30 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange delivery,ci(is:210gr.fg260), p.no.29 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, splite flange suction, ci(is:210gr.fg260), p.no.28 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, coupling key, ss (6x6x630) p.no.27 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland plate studs, m8, p.no.26 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing studs, m12, p.no.25 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o-ring far end, (80x30)neoprene, p.no.24 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller gasket, viton, p.no.22 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, thrower, uhmwpe, p.no.21 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, o ring (drive end), 90x3 neoprene, p.no.20 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil drain plug, zinc coated ms, p.no.19 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (far end), 30x42x10, p.no.18 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, housing support, ms (is:2062) ,p.no.17 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft, ss 431 ,p.no.14 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, breather, zinc coated m.s., p.no.13 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, casing mouting ring, ms (is:2062), p.no.10 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, oil seal (drive end), 35x47x10, p.no.09 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (f e), ci(is:210gr.fg260), p.no.08 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, gland cover, ss-316, p.no.07 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing cover (d e), ci(is:210gr.fg260), p.no.06 for pump model: pphp3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, bearing housing, ci(is:210gr.fg260)p.no.05 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, shaft sleeve, hostelloy c, p.no.04 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, back plate, uhmwpe, p.no.03 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller, uhmwpe, p.no.02 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440, impeller casing, uhmwpe, p.no.01 for pump model: pph-p3m, capacity: 10 cu.m/hr,head: 10 mts and rpm: 1440

CTN :45288559

08 Jun, 2026 95

Multi City - Karnataka

Tender For supply of motor reawinding items for yalavatti gram panchayath harihara taluk davanagere district - waterseven and half hpmotor reawindingyltpdo01, water six hp motor reawindingyltpdo01, water five hp motor reawinding yltpdo01, water three hp motor reawindingyltpdo01, water three h p motor reawinding single phaseyltpdo01, water two h p motor reawinding single phaseyltpdo01, conacter three phase motoryltpdo01, stud ten x twenty five m m yltpdo01 , ten m m nut ssyltpdo01, oil sealyltpdo01, housing yltpdo01, flange ten mmyltpdo01, flange eight mm yltpdo01, stud ten x seventy five mm yltpdo01, eight x thirty five m m stud yltpdo01, six inch body surclifeyltpdo01, thrust bearing plateyltpdo01, rotory surclife twenty mmyltpdo01, rotory surclife one eight mmyltpdo01, cable guardyltpdo01, motor messss yltpdo01, motor chavi yltpdo01, motor cuppling yltpdo01, motor chavi guard brass yltpdo01, water nut p v cyltpdo01, water nut brassyltpdo01, motor bush gun mettel l byltpdo01, pump boleyltpdo01, ip canacter yltpdo01, pocanacter yltpdo01, pump chavi twelve mmyltpdo01, pump shoft twenty mm x twenty three inch ssyltpdo01, pump shaft twenty mm twenty six inch ss yltpdo01, pump shoft twenty mmx twenty nine inch yltpdo01, ipbush gm yltpdo01, do bush gmyltpdo01, stge bush g myltpdo01, stage slivetwnty five xfifty xfiveyltpdo01, stage slive twnty five xfifty xfiveyltpdo01, ten mm nut msyltpdo01, flatewasher one pc msyltpdo01, pump mess ssyltpdo01, pumpallen key screw yltpdo01, pump patti eight stage twenty three inchyltpdo01, pump patti ten stagetwenty nine inch yltpdo01, pump patti twelve stage thirty twoyltpdo01, stater do ltlkyltpdo01, fuse sixty three ampsyltpdo01, pennal bord two x twenty one x twoyltpdo01, singleprawenter yltpdo01, auto stateryltpdo01, amps meateryltpdo01, voltmeateryltpdo01, nutral linkyltpdo01, star detta stater ltlk yltpdo01, sixmm copper wire one miteryltpdo01, threecrore two and five sq mm cable one meteryltpdo01, three crore foursgm m cable one meter yltpdo01, stater relay yltpdo01, stater bladusetyltpdo01, stater coil yltpdo01, connectoryltpdo01, eight x twenty mm stud yltpdo01, eight mm stud yltpdo01, oil scale twenty five twenty and fourty yltpdo01, housingk yltpdo01, flange eight mmyltpdo01, eight x seventy five mm studyltpdo01, eightmm allen key screwyltpdo01, body circlifeyltpdo01, thurstbearing plateyltpdo01, cable guard1234yltpdo01, moter messyltpdo01, moter cupplingyltpdo01, moter changuardyltpdo01, tp plateyltpdo01, moter bush yltpdo01, single phase bole and imolliercora fouryltpdo01, single phase bole and imolliercora fiveyltpdo01, single phase bole and imolliercora yltpdo01, single phase bole and impllieyltpdo01, pump soft twelve mmyltpdo01, ipbush yltpdo01, do bushyltpdo01, allentment washer yltpdo01, pump share yltpdo01, capacater sfifty m f dyltpdo01, running thitry six m f dtwenty five m fdyltpdo01, capactershunderd ten to two hunderd tenyltpdo01, amps meater yltpdo01, volt meateryltpdo01, connector yltpdo01, statercoilyltpdo01, bladesetyltpdo01, motr lifting charge yltpdo01

CTN :45264348

22 Jun, 2026 15.00 Lacs

Gwalior - Madhya Pradesh

Tender For providing rates for motor winding and handpump repairing items for ulb mohana - motor winding 5hp, motor winding 7.5hp, motor winding 10hp, motor winding 12.5hp, motor winding 15hp, motor winding 20hp, rotor new 5hp, rotor new 7.5hp, rotor new 10hp, rotor new 12.5hp, rotor new 15hp, rotor new 20hp, motor starter 5hp, motor starter 7.5hp, motor starter 10hp, motor starter 12.5hp, motor starter 15hp, motor starter 20hp, upper housing, lower housing, motor base, adoptor, carbon gm, desk (fiber/ steel), roder reble ss, motor bush (rubber), motor bush (gm), coupling ss 25/18/70, coupling ss 25/25/80, upper flag, lower flag, sen guard gm, tv axcle, filling pump, rotor polring shield, rotor maintainance, excle key, starter slong sahi karna, maintainance of rotor shaft, water shield, cable joint, cable joint 5hp (2.5)mm, cable joint 10hp (4)mm, cable joint 7.5hp (4)mm, cable joint 12.5hp (6)mm, sirclip, stand, coupling 10mm 6inch, coupling 10mm i3nch, coupling 10mm 2inch, lylone nut 10mm, motor chabi, chuknut carbon, labour fitting, ampler gm, stage casing (chudi wala) ci, stage casing (stand type ) ci, stage bush (rubber), stage bush (brass), pump slip ss 18/26/30, pump slip ss 24/30/73, pump shaft, nekring gm, pump key ss, section case ci, nrb body ci, stand 2inch 2.5 sut, difuser gm, pump lock gm, sampler welding krna turn krna, section bush, section slip, discharge bush, 1hp motor winding, 2hp motor winding, motor pump fitting charge, motor pump dalna, motor pump nikalna, gir hui motor pump nikalna, handpump dalna, handpump nikalna, handpump repairing, plate ki bearing gutka, motor lock chota, motor lock bada, motor k andr k cover chote, motor k andr k cover bade, motor s bearing plate

CTN :44948937

30 May, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For corrigendum : supply of 701324 o ring crankcase cover , er6150b-705003 hp pump driving belt set , er6150b-mem02030 membrane cushion dts , er6151b-415v-p3-63-ea-svb main switch 63amp , er6151b-702103 hp flexi hose connecting hp disch press gauge disc , er6151b-702133 brine rw hp flex hose , er6151b-zaa00054 spare kit d 25 pvc , er6150b 208009 1 4 fxpu4 elbow , er6151b- 100125101001 prefilter pump , er6151b-100200104066 retainer seal , er6151b-100103001004 permeate transfer pump , er6151b-100210204001 pulsation damper , er6151b-100200131058 rod plunger , er6151b-100200131068 retainer seal , er6151b- 100200131069 wick long tab , er6151b-100200131071 inlet manifold , er6151b-100700402003 flow meter 150-1500lph , er6151b 100802114101 pu 4 hose , er6151b 100200131076 adapterinlet valve , er6151b- 100200131085 manifold discharge , er6151b- 100200131901 ho pump seat kit , er6151b- 100200131902 hop pump valve kit , er6151b 100200131903 plunger retainer kit , er6151b- 100300211131 motor 415v 6p 75 kw sidetb , er6151b- 100400401501 cartridge filter head , er6151b- 100700246005 abs ball valve 2 way 32 mm , er6151b- 100700405004 flow switch , er6151b 100802114102 pu 9 hose transperent , er6151b-100803116002 victaulic couplings 1 14 , er6151b-100805414101 straight connector 14 m x pu 4 , er6151b- 100900305012 smcv valve unit for 3 4 valve , er6151b-101100408004 isolating repeater , er6151b- 101100815101 thermostat , er6151b-101101103101 miniature relay 24vdc , er6151b-101101103102 miniature relay 230 vac , er6151b-101102832001 running hour meter , er6151b-101200102003 pressure gauge 0-10bar , er6151b-101200291004 pressure transmitter 0 -100bar , er6150b- 100200125060 oil seal crankcase , er6150b-101131 pressure maintaining vlave , er6150b-204933 ss connectior kit , er6150b-100400401502 o ring cartridge filter housing , er6150b 100601711001 lip seal dt module groove ring , er6150b-100802114101 flexible pipe- pu4 , er6150b-100802114201 flexible pipe-pu 8 9 , er6150b-100902101003 solenoid valve , er6150b-100922102001 nonreturnvalve 3 8 f , er6150b-102603 contactor 12 5 kw , er6150b-103216 motor of filter pump type 1 1 kw , er6150b-104285 pressure gauge 0-10 , er6150b-105000200147 permeate transfer pump , er6150b-201503 ball valve s s , er6150b -202301 prefilter pump shaft seal , er6150b-202632 spacing pipe , er6150b 202633 spacing pipe , er6150b-202634 spacing pipe , er6150b-203256 gf pvc-u ball valve 3 waypvc-u 32 mm spigot type , er6150b-203352a non return valve , er6150b-205018 pulley 5 groove spa 125 , er6150b-205113 taper bush 2517 bore 35 mm , er6150b 205117 taper bush pump , er6150b-205118 taper bush 1610 bore 42 mm , er6150b-205303 bearing hp motor , er6150b-206119 oil seal plunger rod , er6150b-206621 washer oil seal , er6150b-206622 oil seal crank case , er6150b- 206623 seal retainer - 2 pc , er6150b-604041 lip seal dt module , er6150b-706001 coupler for victaulic coupling 1 , er6151b 00249 level switch , er6151b- 03807 o-ring for cartridge filter , er6151b 100100202035 neck ring p 45 , er6151b-100100202055 neck ring retainer , er6151b -100100203031 //bid details 2 / 120 mechanical seal p 105 , er6151b-100100203032 sleeve gasket p 37 , er6151b-100100203046 bearing ring p 47a , er6151b-100100203051 coupling complete for pump , er6151b-100100203055 neck ring p 45 , er6151b 100100203056 neck ring retainer , er6151b- 100100203065 split pin , er6151b-100103001046 kit repair , er6151b-100103001047 kit gaskets , er6151b- 100103001049 kit plug , er6151b-100103001061 shaft seal , er6151b-100120101039 splash ring p 507 , er6151b-100120101040 ring circlips p 931 , er6151b- 100125101035 sleeve shaft p 14 , er6151b- 100125101036 i b bearing p 16 , er6151b-100125101037 gland formechseal p 17b , er6151b-100125101039 o b bearing p 18a , er6151b-100125101040 circlip internal p 18b , er6151b-100125t01047 impeller gasket p 28 , er6151b-100125101049 o-ring bearing housing p 33b , er6151b 100125101050 deflector p 40 , er6151b-100125101052 lip sealib p 47

CTN :45243141

09 Jun, 2026 12.78 Lacs

Murshidabad - West Bengal

Tender For procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp - procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp, cam segment for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, shaft with shaft struct & shaft sleeve for bottom ash crusher dcips moc-en24 & ss 410,drawing no 25p06-t-1b-582, wear plate front for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate back for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate side for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, gland for packing for bottom ash crusher dcips moc-ci fg-260 is:210,drawing no 25p06-t-1b-582, packing gland follower for bottom ash crusher dcips moc-bronze ltb 2,is:318,drawing no 25p06-t-1b-582, packing gland flange for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582, lantern ring for bottom ash crusher dcips moc:brass ltb-2,is318,as per dcips drawing no 25p06-1b-t-722, labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips, cam bolt for exen crusher for bottom ash crusher size: m20 x 65 long,sq.head,thread length 34 mm with nut,lock nut & spring washer.m.o.c: en8, chain simplex for bottom ash crusher dcips drawing no 25p06-t-1b-582, sprocket drive and driven for bottom ash crusher dcips drg.no.28p03-1b-t-582(rev-2), feed sump for bottom ash clinker crusher for bottom ash crusher dcips as per dcips drawing no 25p06-1b-t-722, nozzle tip with ceramic insert # 2,13 dcips for jet propulsion pump,part no-2&13,as per dcips drawing n0.-25p06-1b-t-591# for jet propulsion pump,as per dcips drawing n0.-2 5p06-1b-t-591 sgtpp1, nozzle inlet for jet pump for jet pump sgtpp dcips moc: fg,is 210,as per dcips dwg no 25p06-t-1b-591, throat cum disch pipe of jet pump for jet pump sgtpp dcips moc: durite(bhn 500-550),as per dcips dwg no 25p06-t-1b-591, punched washer type a for jet pump,moc:ss410/416,as per dcips punched washer (type dcips punched washer (type a) for m 20 bolts is 2016 of of jet pulsion pump,as per drawing,part no-05,material: steel, guide angle lh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, guide angle rh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, gate roler fitted with bush for ba feed gate dcips drawing no-25p06-t-1b-572,material-steel-is:1030, renewable seat lip for ba feed gate for ba feed gate dcips moc-ms is:2062 with ss316 lip,drawing no 25p06-1b-t-572, adjustable seating wedge # for bottom ash feed gate assembly as per drawing no.28p03-1b-t-576(rev-2), enclosure cover plate # dcips for bottom ash hopper feed gate enclosure, moc:ms,is:2062,10mm thk,as per dcips drawing no 25p06-t-1b-572, gasket,for ba feed gate access door for bottom ash moc: neoprene rubber , dcips drg no: 25p06-1b-t-572, gasket for feed gate enclosure for ba feed ga moc: neoprene rubber, elbow,200nb x45 for wet ash system sgtpp dcips moc: durite (alloy c.i),bhn:450-500,as per dcips dwg no 25p06-1b-t-831, elbow,200nb x90 for wet ash system sgtpp moc: durite (alloy c.i) bhn:450-500.as per dcips dwg no 25p06-1b-t-835, lateral,200nbx45 p/p/p for wet ash system sgtpp ba slurry line.moc: durite(alloy c.i) bhn: 450-500, guide angle bracket for ba feed gate for ba feed gate dcips moc-ci fg-220 is:210,drawing no 25p06-1b-t-572

Tail End Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector