Tender For supply of non reversible thermal strips, vertical mounting self adhesive type, model :tl-8-130 range from 54.4 to 93 deg c in steps of min 8 levels, 54.4, 60,65.6, 71,77,82,88,93 degc, should show deg c and fahrenheit , should be oil, water and stem resistance, with accuracy of 1%, size 57 x13mm. packing: each pack shall contain 16 nos make: thermax (or)thermolabel (or) paper thermometer (or) thermindex (or) 3m (or) palmer wahl or equivalent. [ warranty period: 30 months after the date of delivery ]
Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.
Tender For supply of a set of items consist of (1) card for lube oil size 320x250mm.,gsm:300+, colour of the card shall be yellow, the printing format is as per annexure: a in one side print only, qty-500nos. (2) card for coolant water size 320x250mm., gsm:300+, colour of the card shall be light pink, the printing format is as per the annexure: b in one side print only, qty-500nos (3) card for loco history size :a3, gsm:300+ with one side printing, the printing format is as per annexure:c, the colour of card shall be light pink, qty:500 nos. (4) card for gear case oil size: a3, gsm:300+ with one side printing, the printing format is as per the annexure:d, the colour of card shall be light blue. qty-500nos. (5) analytical record book shall contain 150 leaves of paper size a4 with double side printing, the printing format is as per the annexure: e, the colour of papers shall be white, qty-25nos.(6) memobook for coolant water with 100 leaves of paper size: a5, gsm:70-90, colour of papers shall be light green, the printing format is as per the annexure:f in one side print only, qty-25nos. (7) memo book for oil with 100 leaves of paper size:a5, gsm:70-90, colour of paper shall be light blue, the printing format is as per the annexure:g in one side print only, qty-25nos. [ warranty period: 30 months after the date of delivery ] ]
Tender For procurement of spares for kirloskar make iac installed at ahp ph-1 and chp ii,sstpp,mppgcl ,dongalia. - crankcase, crankcase bare ha-2, lub and n/l / /as per schedule, stud m20x2.5x146/50as per schedule, nut lock hex m20x2.5 / en-3a / (9990674050)as per schedule, nut hex plain m20x2.5 / /as per schedule, bearing bush (main);2/4/6 cylinder / white metal /as per schedule, "washer thrust 135dx111dx8.6 (pb4c) crankshaft //as per schedule", pin dowel 10dx80 / en-43 /as per schedule, bearing big end f/conn rod / copper ;lead /as per schedule, "gasket 415x400x0.3 for side cover and crankcase/ paper / haas per schedule", gasket 435x340x0.3 between crankcase and distance piece f/2-4-6 cylinderas per schedule, gasket 696x621x0.5 between crankcas e and top cover for 2 cylinder / paperas per schedule, gasket inspection cover; 275 dx195 dx2 / kl /as per schedule, bolt hex head m10x1.5x20/20 / grade 8.8,is:1367 /as per schedule, stud m16x2x40/35 / / (9990370350)as per schedule, ring o 30.8x3.6 deflector n/l / s ilicone rubber / haas per schedule, assembly set of scraper ring (bronze)as per schedule, gasket 110x66x0.5 for cover scrappe r ring / paper /as per schedule, gudgeon pin for piston;2/4/6 cylind er / aisi-3115 / haas per schedule, bush for small end 50dx40dx54.5 for connecting rod / cairo bronze / haas per schedule, circlip internal 40x1.75n / is:3075 /as per schedule, rod connecting; body and cap / 080m40 bs 970:p / 2- 4-6 cylinderas per schedule, crankshaft 2 cylinder / sgi / haas per schedule, guide crosshead / / ha 2-4-6 cylin deras per schedule, cross head 2/4/6 cylinder / (bs 278 9 ) sng / haas per schedule, assly of stud taper male coup, r1/4", lightas per schedule, assly of stud taper male coup, r1/4", heavyas per schedule, gasket 68x50x1;between secondary oil filter and support(purolator)as per schedule, gasket 96x40x2; oil collector pipe / kl /as per schedule, oil piping items kit ('ha2' series compressors)as per schedule, plate top for crankcase / ci / haas per schedule, cylinder / piston 310 dia, stud m16x2x65/35 / en-3 / (9990371150)as per schedule, nut hex plain m16x2 /as per schedule, cover front end 310 dia (body port ion ) / ci /as per schedule, stud m10x1.5x32/25 / / (9990363550)as per schedule, "ring support (carrier bush) for pis ton n/l / en-58/as per schedule", box stuffing n/l,2/4 cylinder / ci / haas per schedule, plate intermediate for 310d cylinde r n/l /as per schedule, ring o 30.8x3.6 deflector n/l / s ilicone rubber / haas per schedule, cylinder 310 dia lp n/l / ci;bs-145 2 gr-2 / ha 2/4 cylinderas per schedule, s/a piston 310d, non lub / al /as per schedule, ring bearing piston 310d n/l / tefl on /as per schedule, ring sealing piston 310d n/l / tefl on /as per schedule, nut blocking m30x3.5for piston rod n/l / en-56 / haas per schedule, rod piston 54dx828,n/l / en-8b or a isi-c1034 / ha-2-4- 6 cylinderas per schedule, nut hex m30x3.5 for piston rod lub and n/l / en-3 / haas per schedule, gasket 245x180x0.3 bet distance piece and int. plate; 2-4-6 cylinderas per schedule, gasket 470x406x2; front end cover 3 10 d / kl /as per schedule, gasket 112x2(ovel) for suction filt er / kl / haas per schedule, gasket inspection cover; 275 dx195 dx2 / kl /as per schedule, gasket 140x78x2 for suction side of hp cylinder f/2-4-6 cylinder / klas per schedule, packing gland ring (p.t.f.e), m49x3 2x8as per schedule, ring retaining for 2-4 cylinder n/l / /as per schedule, stud m10x1.5x50/40 / /as per schedule, nut hex plain m10x1.5 / /as per schedule, cylinder / piston 185 dia, cover front end 185 dia (body port ion ) / cias per schedule, gasket 140x78x2 for suction side of hp cylinder f/2-4-6 cylinder / klas per schedule, plate intermediate 185d cylinder(49 x108x28) non lub / ci / haas per schedule, cylinder 185 dia n/l / ci;bs-1452 g r-2 / ha 2/4/6 cylinderas per schedule, s/a piston 185d non-lub haas per schedule, gasket front 305 dia x 244 dia x 2 and back 180 dia,185dia cylinder / klas per schedule, gasket inspection c