Latest tank pad repair Tenders | Government tank pad repair Tenders

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :45264382

30 May, 2026 68.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply and installation of furniture for boys hostel - iii at nliu, bhopal - supply of furniture, providing steel almirah mirror having overall size 910w(+ 05mm) x 500d(+ 05mm) x 1980 (+ 05mm) h , top , bottom , side panel made up of 1mm thick crca sheet powder coated , legs or pedistal and shelves made up of 1.2mm thick crca sheet powder coated and height of thelegs or pedistal should be 130 mm(+ 05mm), shutter made up of 1mm thick crca sheet powder coated , no sharp edges of almirah ends, all shelve rack divided into equal parts , door die cast chrome plated handles fitted with washer & double nut , handles ring made of pvc cap , almirah all metallic panels screw with nut & bolt, metal pipe & 07 tank treatment with minimum 50 micron powder coating. shelving height-wise adjustable shelf mounting: uniformly distributed load capacity per each full shelf is 40 kg maximum. three horizontal shelf partitions are provided made of 1.2 mm crca steel top shelf clear space height from bottom is 1050 mm and second shelf height from bottom is 700 mm and third shelf height 350 mm; 1mm crca sheet fitted with heavy duty 25mm. hanging rod 02 nos. 25mm dia med guage ss capsule pipe is provided on the top in the centre. locking & handle - s.s. handle with 2 way locking mechanism with shooting rod/bolt arrangement. 5mm tk plain mirror (make-modi, asahi, saint gobain) of size 400 mm x 1200 mm is to be provided on one flap fixed with the help of m.s. clips/beading as per approval. whole steel structure is epoxy powder coated to the thickness of 50 microns in approved shade/color and texture. the work includes all required m.s. hinges, handle, lock, bolts and hardware of good and approved quality etc. compete. this job includes all installation, material & labor etc. complete and nothing will be paid extra for execution/installation of the item. items should have 5-year warranty., providing hostel bed overall size 1980w(+ 10mm) x 960d(+ 10mm) x 810h(+ 10mm), hostel bed made of prime quality round metal pipe of size 38mm dia 1.2mm & 50x25mm thick crca rectangular pipe 1.2mm thick, head rest designed with 38mm dia with 25mm round support pipes for supporting pillow having height of 810mm, bed mattress structure made from 50x25x 1.2 mm & 25x25x1.2 mm pipes, mattress support panel made of 12mm thick isi/bis grade bwp plywood, mattress panel height from floor should be of 450mm, four number of supports of size 25x25x1.2mm are given to mattress panel, additional 25x25x3mm angle used under ply along with headboard & footboard having length of 100 mm of each, the complete structure should be in knockdown construction and assembled with nut & bolts, all open edges of pipes should be covered by good quality ppcp shoes/caps, . all metal components should be pre-treated with zinc phosphating in minimum 07 tank process and then powder coated with epoxy polyester with approved shade, thickness of coating should be minimum 50 micron. .items should have 5 year warranty., providing study table overall size 900w(+ 05mm) x 600d (+ 05mm)x 750h(+ 05mm) , table top made up of 16mm thick bwp termite proof ply wood , 0.8mm mica on top and 0.6 mm balancing mica on bottom isi/bis standard as applicable for the product with 2mm thick pvc edge bending , understructure made of crca 40x40x1.2mm square metal pipe duly powder coated, understructure crca square metal pipe 40x40mm x 1.2mm thick made in knockdown condition, table provided with one side storage single drawers fixed pedestal with depth of 575mm(+/- 05mm) ,storage should be of size 300 mm (w) and 120 (h). the storage support ms pipe25x25x1.mm . storages made of 1.2mm thick crca metal sheet duly powder coated , all opend ends closed with ppcp caps & shoes, all metal parts shall be welded properly strongly and conformity with regulations, the table structure should be in knockdown condition, all metal components should be pre-treated with zinc phosphating in minimum 11 tank process

State Government

CTN :45222242

29 May, 2026 NA

Karur - Tamil Nadu

Tender For picking and passivation of hydrogen peroxide storage tank and pipeline fittings at deinking plant and pulp mill process

Central Government/Public Sector

CTN :45197194

04 Jun, 2026 NA

Barauni - Bihar

Tender For providing of custom bid for services - hiring services of ultrasonic thickness survey of station process piping crude oil pipeline at pump station 10 fire water ring piping and 1200 kl balance tank at pump station 10 of barauni p10 barauni of oil india limited at..

Central Government/Public Sector

CTN :45193704

09 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of front part cpl for lwscz2 under frame with direct mount bio toilet tank to drg. no. 81411007, alt "nil" col.i. firm shall fulfill the manufacturing facility as per icf/md/spec-147, issue status-01,rev.02 with amendment no.02. i) for painting system follow the drg no.53811116, alt 'e' special condition : suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of sole bar with cross members. # assembly of body bolster arrangement. # weldingof ribs with sole bar. # placing & welding of top sheet arrangement. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrosion. [safety item] [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45184714

28 May, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of set of under frame front part (schedule of infrastructural requirements to specification no mdts 21261 rev.- 03 dated 09.06.2020)) to be mask as per drawing number mi005396 alt. 'hm' for lhb type coach with bolted mounting arrangement of bio-tank. note: 1) the dimension of hub flange shall be 136mm (after machining, ref. drawing number: 110113.1.03.121.002). 2) the dimension ofcenter of cbc center ensures 146mm & 163 mm (ref. drawing number: le11460 alt. 'nil' sheet 1). 3) dimension 309mm, 82.5mm and 75mm from buffer plate (ref. drawing number: 210113.0.03.130.112alt 'er2'). planning set list number: mp13uframebio version 4a. protection procedure: a. under frame/front part shall be applied with app to rcf spec. mdts 48279 rev. 4, amendment 1 or latest instead of rozc. this app shall be applied after proper cleaning the surface and welds. at interfacing positions where welding is to be done later on with other assemblies shall be masked as per drawing numbermi007679 alt 'nil' and no app is to be applied in this area so that fumes are not generated during welding in this areas. b. cbc housing inside area shall be grit/garnet blasted and to be painted with epoxy metal primer of dft 60 micron and high build paint elastified with dft 140 micron as per spec no. mdts 094 as mentioned in drawing number: mi005396 alt. 'hm'. c. the standard welding procedure followed in lhb coaches for welding carbon steel to stainless steel shall be applicable i.e. specific electrode. post process of the welds etc. special condition:to maintain the limit of straightness and twist in front part of the under frame, inspection fixture to drawing no xj003601 alt. 'a' is to be followed to improve the quality of front part & under frame of lhb coaches.at present, as per revised drawings of underframe head stock top flanges i.e. le11284 alt. 'g' and le11285 alt. 'h' are replaced with 4mm ferritic stainless steel to material grade specification no: "rdso spec no c-k201 x2crni12". [ warranty period: 84 months after the date of delivery ] ]

CTN :45027126

28 May, 2026 NA

Bareli - Madhya Pradesh

Tender For corrigendum : supply of set of under frame front part (schedule of infrastructural requirements to specification no mdts 21261 rev.- 03 dated 09.06.2020)) to be mask as per drawing number mi005396 alt. 'hm' for lhb type coach with bolted mounting arrangement of bio-tank. note: 1) the dimension of hub flange shall be 136mm (after machining, ref. drawing number: 110113.1.03.121.002). 2) the dimension ofcenter of cbc center ensures 146mm & 163 mm (ref. drawing number: le11460 alt. 'nil' sheet 1). 3) dimension 309mm, 82.5mm and 75mm from buffer plate (ref. drawing number: 210113.0.03.130.112alt 'er2'). planning set list number: mp13uframebio version 4a. protection procedure: a. under frame/front part shall be applied with app to rcf spec. mdts 48279 rev. 4, amendment 1 or latest instead of rozc. this app shall be applied after proper cleaning the surface and welds. at interfacing positions where welding is to be done later on with other assemblies shall be masked as per drawing numbermi007679 alt 'nil' and no app is to be applied in this area so that fumes are not generated during welding in this areas. b. cbc housing inside area shall be grit/garnet blasted and to be painted with epoxy metal primer of dft 60 micron and high build paint elastified with dft 140 micron as per spec no. mdts 094 as mentioned in drawing number: mi005396 alt. 'hm'. c. the standard welding procedure followed in lhb coaches for welding carbon steel to stainless steel shall be applicable i.e. specific electrode. post process of the welds etc. special condition:to maintain the limit of straightness and twist in front part of the under frame, inspection fixture to drawing no xj003601 alt. 'a' is to be followed to improve the quality of front part & under frame of lhb coaches.at present, as per revised drawings of underframe head stock top flanges i.e. le11284 alt. 'g' and le11285 alt. 'h' are replaced with 4mm ferritic stainless steel to material grade specification no: "rdso spec no c-k201 x2crni12". [ warranty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :45102186

22 May, 2026 NA

Hubli - Karnataka

Tender For supply of ss bimetal thermometer. dial size: 100mm, back mounting direct connection, stem dia:10mm, immersion length:300mm, process connection: 1/2 bsp(m), adjustable range: 0-100 deg c, accuracy:+/-1% fsd, suitable for a hydraulic tank of 1400 hp demu dpc. make: mass/ wika/ delta/ cummins/ pricol/ baumer or equivalent. [ warranty period: 24 months after the date of delivery ]

CTN :45083242

15 May, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For auction sale of others - u/s scrap abandoned quarter block no 543/ (a+b) type iv (02 unit) not fit for rly use. bricks 36200 no approx, brick bats- 26.50 cum approx ,ladder,grill door,saria, angle,barbed wire,xpm,gi pipe,etc in different shorts and sizes 610 kg approx , u/s rail (roof rail) in different short & sizes - 4110 kg approx, wood door, window,ventilator etc 1890 kg approx dismentaling cc (rubbish) approx 22.10 cum u/s pvc water tank 02 nos approx location block no 543/(a+b) bichhiya railway colony gorakhpur custodian - sse-work- bichhiya -gkp condition 1- the above lot has already been declared abandoned by the competent authority. 2 dismantling of structure by concerned purchaser on his own risk and cost, if any loss will be occur during dismantling process whole responsibility liable by purchaser. 3- the lot is formed on estimated basis , hence any item may be less or more 4- if any girder material is found in the lot, it shall be handed over to sse/works/ bicchiya by the purchaser. 5 after removing all the material from the site, leveling dressing and cleaning activity perform by the concern purchaser by his own risk and cost. loading by purchaser labour, delivery by lot, gst-18% ,hsn code-72044900, tcs-1%, allocation-20714208

CTN :45087275

14 May, 2026 40.00 Lacs

Multi City - Karnataka

Tender For consultancy service for topographical survey, cadastral survey, preparation of land acquisition plan and form-1, form-3 notification and assisting department for completing tdr process of 1.855 km for the work of widening of padarayanapura main road from binny mill tank bund road to vijayanagara pipeline road

Tank Pad Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector