Latest tap connector Tenders | Government tap connector Tenders

corporations/Associations/Others

CTN :45316205

06 Jun, 2026 3.96 Lacs

Tiruchirappalli - Tamil Nadu

Tender For supply of aluminium knob

State Government

CTN :45274100

28 May, 2026 4.70 Lacs

Anuppur - Madhya Pradesh

Tender For supply of spares of push button actuators and its accessories for switchgear ,control panels of 210 mw atps mppgcl chachai. - push button actuator with carrier & contact element – non illuminated (metallic series) : 22.5mm, mushroom head 40mm (press to lock, turn to release), colour – red, push button actuator with carrier & contact element – non illuminated (metallic series) : 22.5mm, mushroom head 40mm (key to release), colour – red, flush spring return push button actuator with carrier & contact element – non illuminated ( metallic series) : 22.5mm, colour – red, flush spring return push button actuator with carrier & contact element – non illuminated ( metallic series) : 22.5mm, colour – green, projecting push button actuator with carrier & contact element – non illuminated ( metallic series) : 22.5mm, colour – red, projecting push button actuator with carrier & contact element – non illuminated ( metallic series) : 22.5mm, colour – green, flush illuminated push button actuators with integral circuit led suitable operation at 240v ac ( metallic series) : 22.5mm, colour – red, flush illuminated push button actuators with integral circuit led suitable operation at 240v ac ( metallic series) : 22.5mm, colour – green , 2- position illuminated selector switch knob actuators suitable for operation at 240vac with series resistor : 22.5mm, 2- position non iilluminated selector switch knob actuators suitable for operation at 240vac with series resistor : 22.5mm, 2- position non illuminated selector switch key actuators suitable for operation at 240vac with series resistor : 22.5mm, contact element 1no suitable, accessories for push buttons, contact element 1nc suitable, accessories for push buttons, reset extended push button ( round type), accessories for push buttons, body/ carrier with mounting screw (passivaed) for making different assemblies, accessories for push buttons, metal adopter for 30mm hole to 22.5 mm, accessories for push buttons, enclosure/assembly with 01 mushroom (twist to release) + 01 flush actuator (on/off) with canopies, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 01 mushroom (twist to release) + 01 flush actuator (on/off) with analog ammeter, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 01 mushroom (key to release) + 01 flush actuator (on/off) with canopies, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 01 mushroom (twist to release) actuator, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 01 mushroom (key to release) actuator, material - die cast aluminium/ sheet metal/ stainless steel, enclosure/assembly with 02 flush actuator- red & green, material - die cast aluminium/ sheet metal/ stainless steel

CTN :44042341

27 May, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras supply of prelaminated mdf board (q3) , foam size 6 feet x 3 feet 100 mm th 40 density , veneer sheet 3mm of size 8 feet x 4 feet of approved shade , veneer sheet 6mm th of size 8 feet x 4 feet of approved shade , top of table dinning size 2100 mm x 1050 mm for 8 pers size of 18mm bwr grade i , laminated sheet 1mm thick size 8 feet x 4 feet , 1st class timber wood beating 20mm x 4mm thick , teak woodlegs size 35mm w x 40mm h x 450mm i for chair dining , arm rest teak wood of size 75 x 25 x 610mm for chair easy duly french polished , lakhdana , teakwood legs size 750mm h x 90 mm h x 45mm b for table dining 6 8 pers , 5mm thick glass sliding for dressing table ladies fd 251 size 300 x 300mm , piano type continuous hinges 20mm wide 5m long , teak wood front rail side 100mm i x 35 mm w for sofa , teak wood front legs size 75mm i x 35 mm b x 300 mm h for sofa , top of table peg of size 450mm x 300mm x 380mm madeup of 18mm th bwp grade a , teak wood arms rest of size 70mm x 30mm x 700mm , 75mm long s s handle for ladies dressing mirror , teak wood front legs size 55mm i x 30 mm b x 685mm h for chair writing , nuts and bolts 2 and half inch x 3 by 16 , bee wax white powder , s s 50mm knob hnadle for bed side table map , mirror 5 point 5 mm thick size 1200mm x 600mm for gents mirror , front teak wood leg of size 65 x 35 x 935 for chair dining wooden , hard rubber shoe 20mm dia , nut and bolt 100mm long , nails 2 inch , nails 3 inch , teak wood rear leg of size 70mm x 30mm x 700mm , teak wood legs for table writing as per sample , hard pvc ring 20 mm dia for chair as per sample , hnadle cp 150 mm for almirah with shelves , wooden screw shaved lead 35 mm 8 no 200 nos in a pkt , cp decorative handle 100 mm for almirah , wooden screw shaved lead 50 mm 8 no 200 nos in a pkt , wooden screw shaved lead 60 mm 8 no 200 nos in a pkt , nails 1 and half inch , glass 5mm th of size 300mm x 440mm for hat stand , screw 1 inch half threaded galvanized screw per pkt 200 nos , nails 4 inch , teak wood rails size 20mm b x 40 mm i x 450 mm h for table peg , panel pin 25mm with head , screw 2 and half inch half threaded galvanized screw per pkt 200 nos , screw 2 inch half threaded galvanized screw per pkt 200 nos , panel pin 25mm w o head , wooden screw shaved head 3 by 4 inch 200 nos in a pkt , screw 1 and half inch half threaded galvanized screw per pkt 200 nos , wooden screw shaved lead half inch 200 nos in a pkt , wooden screw shaved head 25 mm 6 no 200 nos in a pkt , screw 3 inch half threaded galvanized screw per pkt 200 nos , panel pin 3 by 4 x 19 , panel pin 20mm w o head , bow handle 100 mm aluminium , clips for fixing almirah shelves , panel pin 19 x 1 , veneer sheet 4mm th of size 8 feet x 4 feet of approved shade , foot rest for bed made out of seasonal teak wood with arm with 4mm plywood , head rest for bed made out of seasonal teak wood with 4mm plywood //bid details2 / 47

corporations/Associations/Others

CTN :45263412

05 Jun, 2026 NA

Pudukkottai - Tamil Nadu

Tender For supply of 4500 sets of stay set complete - supply of silicagel blue, 0.6kva ups, stay set complete( quote price for single unit only), silicagel blue 10 to 12mm, pole pit for 9.0m and 9.14 m psc/rcc / all metal poles (each pit) 1.25 x 0.6 x 1.83 mtr, ordinary soil, semi rocky soil, heavy rocky soil where blasting/ cheseling required [specific approval should be obtained from concerned ee], stay pit, in ordinary soil [0.95 x 0.6 x 1.2m], semi rocky soil, stay pit in heavy rocky soil where blasting/ cheseling reqiured [specific approval should be obtained from concerned ee], erection of poles & stays (including refilling of excavated earth), erection of 7.5m / 8.0m poles [rcc / psc], erection of 9.00m / 9.14m rcc / psc/rail pole, tubular pole and all metal poles, stay set, erection stay set complete, stay erection without rod and pit, replacement of stay rod only. (including stay pit excavation & refilling & erection), replacement of guy shackle only in existing stay, erection of line materials, fixing of lt 1 ph "x" arm, fixing of lt/ht ti fitting, fixing of lt 3 ph "x" arm, fixing of 3[1/2] v ` x arm, fixing of 4[1/2] v ` x arm, fixing of 5 v x arm, fixing of tapping channel / guarding "x" arm, providing of line spacers in lt lines 1 phase, providing of line spacers in lt lines 3 phase, erection of ab switch with pt insulator & jumpering complete, erection of centre rotating switch ab switch complete, fixing of ht pin insulator / strain disc, 11 kv pin insulator with pin, 11 kv strain disc / polymer disc with hardware, 22 kv pin insulator with pin, 22 kv strain disc / polymer disc with hardware, 33 kv pin insulator with pin, 33 kv pin strain disc/polymer disc with hardware, fixing of lt pin insulator with pin, lt shakle with hardware, fixing of aluminium knob, paving stringing and sagging of conductor including binding of pin and proper tight [including transport of condutor from road side to work spot] per run, upto 7/2.59 mm acsr, 7/2.50 aaac including pvc cable upto 25 sqmm, acsr 7/3.35mm & 7/ 3.15 aaac including pvc cable above 25 sqmm, acsr 7/4.09 mm, above 7/4.09 mm acsr & dog conductor, earthing wiring and connection including transporting of earth pipe and excavation of pit], transformer structure earthing 10ft depth - 3 nos of pipe through tubes, dp earthing including all works [double side earthing], erection of 4th earth pipe including earthing, earthing of poles, earth pit masonary work 3 nos earth pits or using 3 nos concrete tub., replacement of detoriated earth pipe per location, concreting with mixture 1:3:6 [including all materials]., mass concreting for centre support for 2 feet including all materials, mass concreting for pole0.6x0.6x1.25m.with coping, sleeve concreting for pole 0.6 m x 0.6m x 0.3 m with coping, sleeve concreting for stay set 0.3 m & 0.75 long, erection of distribution transformer structure complete, excavation of structure pole pits 0.9 x 0.9 x 1.83 mtr, transporting of pole to pit location 2 nos., erection of poles 2 nos, excavation of stay pit 4 nos, erection of stay set (4 sets), mass concreting (cement:sand:jelly supplied by the contractor) 2 nos., erection of 22 kv ab switch, ttransformer structure earthing 10ft depth - 3 nos of pipe through earth tubes, erection of top channel, bed channel [2 nos channel] erection, cross with stud for bed channel erection, erection of belting angle / hg fuse angle, erection of hg fuse set, erection of ht las with jumpering and earthing, erection of lt las with jumbering and earthing, erection of jumpering [ht side], transformer wiring in lt side including jumpering bus bar etc., erection lt open type fuse unit arrangement single, erection lt open type fuse unit arrangement double, painting of stru. complete excluding dt [two coat of red oxide] all metal parts(excluding cost of paint)., painting of stru. complete excluding dt [one coat alu paint, excluding cost of paint), colour washing of 2 numbers structure pole [excluding

corporations/Associations/Others

CTN :45289654

08 Jun, 2026 5.00 Lacs

Dindigul - Tamil Nadu

Tender For dindigul edc - supply of aluminium knob

CTN :45282073

01 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of door lock knob lh , door opening catch with cover , battery cut off switch , 4x4 aluminium body cap oil seal for leakage hub seal packing , hub seal packing , speedo meter cable , electrical work labour charges for checking all broken wires , mechanical labour charges for removal of old items and fitmmlent , door opening catch , combination switch , fog light assy , head light bulb , hood light assy , indicator , parking light bulb , tail light bulb , wiper blade , ram assy overhauling , rear hub nut and bolt , rear hub packing , wheel nut and bolt , electrical work labour charges for checking all broken wires , mechanical labour charges for removal of old items and fitmmlent of , batter cut off switch , hood light wiring , indicator assy , reverse gear buzzer , side mud guard indicator , tail lamp assy , 4x4 aluminium cap , clutch booster assy , brake kit pipe with connector , clutch booster pipe , clutch plate , clutch pressure plate , clutch release bearing , hood pump 3 way union , mechanical labour charges for removal of old items and fitment , door lock , battery cut off switch , reverse light switch , 4x4 aluminum cap , diesel over flow pipe with connector , hood lifting pump , hub axel bolt and nut , load spring blade , load spring blade 35 inches , feed pump hand primer , electrical work labour checking all broken wires and bulbs and necessary , mechanical labour charges for removal of all items of new spare parts , door mechanism , head light wiring , spare wheel rope , electrical work labour charges for checking all wires and bulb , mechanical labour charges for removal of all items and fitments of , head light assy , parking bulb , relay 12volts , cabin lock nut and bolt , front shaft nut and bolt , spider bearing , mechanical labour charges for removal of all items and fitments ) /bid number : gem/2026/b/7565952 * /dated: 20-05-2026 & & / bid document 1 / 45

Central Government And Public Sector

CTN :44730748

22 May, 2026 11.55 Lacs

Raebareli - Uttar Pradesh

Tender For bid to ras supply of bulb 60w clear glass , bulb 15w clear glass , bulb led 9w , bulb led warm white 14 w , bulb led 45w , call bell buzzer , batton holder , plug top 6a , plug top 16a , swich 6a , socket 6a 5 pin , swich 16a 4 screw , socket 16a 4 screw , swich 16a 2 screw , tube fittig led 20w 4 ft , flexcible wire 2core 23x76 full gage , pvc cable 2core flat white 23x76 , multi strand wire 0 point 75 mm square green , multi strand cable 3core 1 point 5 mm , mcb sp 10a b or c class , mcb sp 20a b or c class , mcb sp 25a bor c class , mcb sp 32a b or c class , mcb tpn 63a , mcb tp 63a , insulation tape all 4 coulor , gang box 3 socket , gang box 1 socket , pvc wall plug gulli , casing caping , capacitor 6mfd , capacitor 2mfd , capacitor 2 point 5mfd , fan regulator socket type , bearing 6201 , bearing 6202 , bearing 6203 , energy meter s phase , energy meter 3 phase , switch 10a modular , socket 10a modular , switch 20a and 10a modular , socket 20a and 10a modular , fan regulator knob , exhaust fan 12 iron body , exhaust fan 12 plastic body , obstrustion led red bulb , round seat , flexcible pipe 1by2 , lugs aluminium 70mm eye type , lugs aluminium 95mm eye type , lugs aluminium 120mm eye type , lugs aluminium 185mm eye type , lugs aluminium 300mm eye type , lugs aluminium 400mm eye type , machine screw 1 brass , machine screw 1 point 25 brass , machine screw 2 point 5 inch brass , china screw black 1 by 2 , china screw black 1 inch , china screw black 1 point 25 , brass cup washer , ceiling fan clamp hook , ceiling fan hook rubber ushape , ceiling fan hook rubber round shape , nut bolt ceiling fan , mds socket , combination plier , wire striping plier 0 to10mm , nose plier , screw driver , ball peen hammer , adjus table wrench , ring spanner , hack saw , electrical insulatrial gloves upto 440v , electrical insulatrial gloves 11 kva , continuity tester , crimping tool 1point 25 mm to 16 mm , allen key , bearing puller outer , light weight alluminium ladder 6ft , rodometer digital , tape 50m , tape 20m , steel tape 5m heavy duty , plumb bob steel brass , rotary hammer drill heavy duty sds plus , level tube10mm 12mm transparent pvc , angel grinder heavy duty 4 or 5 inch , screw driver set heavy duty multipurpose , plier combination heavy duty , clamp meter digital ac and dc , line tester standard insulation , digital tape , ro water 100 gpd , ro water 150 gpd , ro water 300 gpd , membrane 80 gpd , f r 450 , p.p. filter 10 inch , p.p. filter 20 inch , gac 10 inch , gac 20 inch , smps 24vdc , flood light 50 watt , flood light 100 watt , flood light 150 watt , flood light 250 watt , handi acrylic or glass , led bollard light 12 watt warm white 4 foot , led bollard light 12 watt warm white 6 foot , 2 core armoured cable 10 mm , pvc piper 1 point 5 inch , lamp bi pin 45w with holder , lamp bi pin 200w with holder , led convertor driver , led strip with connector , primary connector kit l823 , isolated transfarmer , secondary cable 3mtr , primary cable 1 point 5 feet

CTN :45252172

30 May, 2026 NA

Patti - Punjab

Tender For supply of plywood commercial 8x 4 x 19mm , plywood commercial 8x 4 x 12mm , lamination sheet 8x 4 x 1mm glossy white , lamination sheet 8 x 4 x 1mm glossy dark brown , aluminium e chanel powder coated 10 feet long 9mm , heavy duty sliding roller for glass 6mm , polifix with activator 250ml and 100ml , screw black full thread flat head 1 and 1oblic 2 inch pkt of 200 nos , screw black full thread flat head 1oblic2 pkt of 200 nos , stainless steel legs 2 inch , glass knob , araldite instant 5 min , feviquick 203 , panel pin 1 inch no 17 , wooden beeding patti design 3 oblic 4inch x 10feet , masking tape 1 feet , glass 5mm thick various size , caster wheel with lock , buffer plastic 1 oblic 2 inch

Central Government/Public Sector

CTN :45197875

04 Jun, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of screws and studs - screw(brass) 18mm , screw (brass) 14.5 mm , chain batt. cover(aluminum 0.50mm thick) , spring - spring loaded terminal -(stainless steel) , stud - spring loaded terminal - brass , washer - spring loaded terminal (brass) , stud - spring loaded terminal - brass , bush-spring loaded terminal (brass) , stud - spring loaded terminal - brass , plate brass 1.2 thick , spring-plunger stainless steel , plate( anodised perporated aluminium sheet 0.3 thick , ring - rubber black , grommet(sel. switch & vol. knob) silicon rubber , gasket - membrane conn (silicon rubber - red) , membrane silicon rubber green , terminal telephone(brass spring quailty) , ring (rubber black) , screw(self tapping) , terminal (brass) , washer base bottom (ring base) synthetic rubber (black)

Central Government/Public Sector

CTN :45167167

21 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of set of four nos of standard calibration gas mixture for dissolved gas analyzer with regulator nozzle fine control 0.5 litres w/c aluminium high pressure canister with fine control needle valve and rubber septum and knob arrangement as spares to draw sample directly from canister using gc syringe.preparation tolerance (plus or minus 20 %) and shelf life 12 months. filling pressure 20 kg/sq.cm.gas composition is as follows: item 1: hydrogen 5 ppm,, methane 5 ppm,, ethylene 5 ppm,, ethane 5 ppm, acetylene 5 ppm, carbon monoxide 50 ppm, carbon dioxide 50 ppm, nitrogen as balance.item 2: hydrogen 500 ppm, methane 500 ppm, ethylene 500 ppm, ethane 500 ppm, acetylene 500 ppm, carbon monoxide 5000 ppm & carbon dioxide 5000 ppm; nitrogen as balance. item 3: hydrogen 700 ppm, methane 700 ppm, ethylene 700 ppm, ethane 700 ppm, acetylene 700 ppm, carbon monoxide 7000 ppm & carbon dioxide 7000 ppm; nitrogen as balance item 4: hydrogen 100 ppm, methane 100 ppm,. ethylene 100 ppm, ethane 100 ppm, acetylene 100 ppm, carbon monoxide 1000 ppm & carbon dioxide 1000 ppm; nitrogen as balance. ]

Tap Connector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector