Latest taper gauge Tenders | Government taper gauge Tenders

Central Government/Public Sector

CTN :44786624

09 Apr, 2026 NA

Kapurthala - Punjab

Tender For supply, installation and testing of brushless dc rly carriage fan ,110v dc, 225mm sweep,for narrow gauge non ac gs coaches., as per drawing: edml282, rev- nil, ogaas per drg no cc76488, alt- nil, packing instruction: pi042 ver 3.0 (1) drawing no. icf/j&t/misc-2487 alt. `b? to be followed. (2) it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier. for underframes: both (1) & (2) to be followed as stated above. for other items except underframes: only (2) need to followed. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44792864

21 Apr, 2026 NA

Erode - Tamil Nadu

Tender For 4 inch pressure gauge for parking brake self illuminated with led ( 24 vdc to 110 vdc ) as per midland & co. drg no. mc-pg-1219-44a or h.k. company drg no. 000100220001 or similar. note: supply by sources as per clw item id: 2100862 in ireps vendor directory. [ warranty period: 30 months after the date of delivery ]

CTN :44774284

28 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of vacuum gauge (combined pirani & bayard alpert gauge) , vacuum control cum display unit compatible with item-1 , interface cable set comprising of (sensor interface cable, rs. 485 communication cable, rs-485 to usb

Central Government And Public Sector

CTN :44760622

24 Apr, 2026 3.17 Lacs

Darjeeling - West Bengal

Tender For installation of obstacle training equipment at cisf unit tld iv ps - earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm, earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressingand ramming the bottom, bailing out water as required complete (b) depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring., cement concrete with graded jhama khoa (30 mm size) excluding shuttering in ground floor and foundation- 1:3:6 proportion, ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground flooras per relevant is codes(b) river bazree, m.s. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle,channel sections conforming to is: 226, is: 808 & sp (6)- 1964 connected to one another with bracket,gussets, cleats as per design, direction of engineerincharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.i) for structural members of specified sections weighing less than 22.5 kg./m, (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc, (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) on steel or other metal surface :with other than higloss of approved quality-(iv) two coats (with any shade except white), filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(b) do - by fine sand, supply and fixing of manila rope/ monkey rope., reinforcement for reinforced concrete work in all sorts of structures including distribution bars ,stirrups, binders etc. initial straightening and removal of loose rust ( if necessary), cutting to requisite length hooking and bending to correctshape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.(a) for works in foundation,basement and upto roof of ground floor/upto 4m) (i)tor steel/mild steel iii. others manufacturers not specified

Central Government/Public Sector

CTN :44772709

27 Apr, 2026 NA

Erode - Tamil Nadu

Tender For supply of portable digital surface roughness monitoring device with accessories (i.e.heigh gauge adaptor and memory card), to monitor and record the surface roughness. make/model: mitutoyo sj-210 series, model : 178-561 12e (or) of the same specification in mahr marsurf ps10 (or) taylor hobson s-100 only. note: item to be supplied along with working manual and calibration certificate traceable to nabl. [ warranty period: 30 months after the date of delivery ]

CTN :44452391

10 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of power-relay , sirius emergency-stop relay , niveau-sensor 7550 , press. meas. convert item 7152 , press. meas. convert item 7161 , speed transmitter , inductive proximity switch , inductive proximity switch , pressure gauge , seawater built-on pump , resistance thermometer , deep-groove valve bearing 6216 , 4-2 way solenoid valve 6292-24 , pressure gauge , pressure monitoring recis v2.0

CTN :44363120

10 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of spares for srgm system - item, rocking arm,lh, assy, rocking arm,rh, assy, pcb pio out 2j25, right nose clamp, support bushes sub-assy, lever, thermistor assy, gauge pressure, gauge,pressure, support sub assy, proximity switch, master gauge conn pipe fxtr w/nippl, pcb, elevation amplifier, pipe fitting sub, front feed buffer, rear feed buffer, hydraulic fluid, rng, bumper, hyd.fluid (mil-prf-5606), washer, grease, dod-l-25681d, lube oil, mil-l-16785a grade a, nut, self-locking, m8 uni 7473, lube oil, mil-l-6086d, grade l, midget flange lamp, o ring ms28775-0aa, o ring ms28775-132, hexagon socket head cap screw, cap, m8 1.25x25(pboh), nut self locking m12 uni 7473, o ring ms28775-220, diode jan 1n485b, bumper, lamp ms 18209-387, needle bearing, washer, 8.4 dia, o ring ms28778-8, o ring, bearing, rlr, dbl row, riv, circlip, 42 dia as per is:3075(2), circlip, 72 dia as per is:3075(2), packing jacottet 60434/packing jacottet 60434a, clamp assy, right nose, guide, bushing, split, washer, busher, bleeder valve, screw mm12x35, disk, damper, lamp, seal, o ring, screw, spring, compression, wire (one reel), o ring ms28775-215, dowel, headed, lampholder, screw, rd head, special, screw, special, spacer, muzzle cap, fuse f028250v3a, cartridge, filter, connector ms3450w14s-7s, drift pin dia 3/drift punch dia 3mm

CTN :44363127

10 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of spares for 30mm mdak gun system - item, rocking arm,lh, assy, rocking arm,rh, assy, pcb pio out 2j25, right nose clamp, support bushes sub-assy, lever, thermistor assy, gauge pressure, gauge,pressure, support sub assy, proximity switch, master gauge conn pipe fxtr w/nippl, pcb, elevation amplifier, pipe fitting sub, front feed buffer, rear feed buffer, hydraulic fluid, rng, bumper, hyd.fluid (mil-prf-5606), washer, grease, dod-l-25681d, lube oil, mil-l-16785a grade a, nut, self-locking, m8 uni 7473, lube oil, mil-l-6086d, grade l, midget flange lamp, o ring ms28775-0aa, o ring ms28775-132, hexagon socket head cap screw, cap, m8 1.25x25(pboh), nut self locking m12 uni 7473, o ring ms28775-220, diode jan 1n485b, bumper, lamp ms 18209-387, needle bearing, washer, 8.4 dia, o ring ms28778-8, o ring, bearing, rlr, dbl row, riv, circlip, 42 dia as per is:3075(2), circlip, 72 dia as per is:3075(2), packing jacottet 60434/packing jacottet 60434a, clamp assy, right nose, guide, bushing, split, washer, busher, bleeder valve, screw mm12x35, disk, damper, lamp, seal, o ring, screw, spring, compression, wire (one reel), o ring ms28775-215, dowel, headed, lampholder, screw, rd head, special, screw, special, spacer, muzzle cap, fuse f028250v3a, cartridge, filter, connector ms3450w14s-7s, drift pin dia 3/drift punch dia 3mm

Central Government/Public Sector

CTN :44380340

10 Apr, 2026 2.51 Crore

Patna - Bihar

Tender For corrigendum : supply of strain pole- quadruple conductor suspension string , strain pole- quadruple conductor tension string , strain poletwin conductor suspension and tension string , quadruple conductor yoke assembly - tension string cold end , quadruple conductor yoke assembly - tension string hot end , quadruple conductor yoke assembly-suspension- i string cold end , quadruple conductor yoke assemblysuspension- i string hot end , adapter- twin conductor yoke assembly for tension string cold end , adapter- twin conductor yoke assembly for suspension- v string hot end , twin conductor yoke assembly- suspension- v and tension string cold end , twin conductor yoke assemblysuspension and tension string hot end , twin conductor yoke assembly- suspension-i string cold end , tongue type strain jack-24 , small trunnion , trunnion gauge , reversible ratchet wrench-prolonged , reversible ratchet wrench- regular , ehv through design insulator cradle , side opening insulator cradle with small hooks- 13 feet , side opening insulator cradle with large hooks- 16 feet , swivel boom- heavy duty , boom support pole , spliced top ladder section- 20 feet , spliced bottom ladder section- 12 feet , swivel stick- 12 feet , swivel stick- 10 feet , swivel stick- 8 feet , spreader bar , ladder clamp , ladder yoke , ladder vertical attachment , ladder horizontal attachment , platform ladder , universal stick- 1 , universal stick- 2 , universal stick- 3 , universal stick- 4 , spiral link stick , wire tong , locating pin , shepherd hook , spiral disconnect , ball socket adjuster regular , swivel boommedium duty , boom extension copper alloy clamp- 3 , boom adapter , capstan hoist- 1000 lbs with bracket and generator , snatch block support , rope separation sticksmall , tower type wire tong saddle , wire tong saddle with extension , bare hand working chair , bare hand stick ) /bid number: gem/2026/b/7188047 * /dated: 09-03-2026 & & / bid document1 / 72 & & ' ' /item categorywith attached clamp , pole clamps , two double and triple blocks with 45 m poly dacron rope , two double blocks with 38 m poly dacron rope , tools rack , swivel hook ladder- 20 feet , composite fiber rope- 1 , composite fiber rope-2 , poly dacron rope- 1 , poly dacron rope- 2 , polypropylene rope-1 , live line rope- 2 , hot clamp , snatch block with forged steel hook- 1250 lb , snatch block with steel meat hook- 1250 lb , snatch block with forged steel hook- 2500 lb , y shape lanyard with large hooks , adjustable work position lanyard , y shape climbing lanyards with small hooks , hand operated hoist with nylon strap- 1 ton , hand operated ratchet hoist- 1and half ton , single ply polyester webbing slings-1 , single ply polyester webbing slings-2 , double ply polyester webbing slings-1 , double ply polyester webbing slings-2 , conductive suit- medium , conductive suit- large , conductive gloves , conductive socks , conductive bootssize- 8 , conductive boots- size- 9 , conductive boots- size10 , bow type screw d-shackle- 1 ton , bow type screw dshackle- 3 ton , bow type screw d-shackle- 5 ton , cordless cutter cum grinder , cordless impact wrench , conductor cart or spacer cycle , handline hook , all purpose cleaner for insulated materials -1 gallon , rope storage containers or buckets- different sizes , lineman tools bag , wiping cloth for insulated sticks , deep metric sockets 12 mm to 32 mm with ratchet and hard case , regular metric sockets 12 mm to 34 mm with sliding tee and hard case , complete tools set includes open end or double ring adjustable wrenche screw drivers pliers etc , tool bucket- large , hot stick tester , ladder monitor kit , fall arrester , fall arrester rope- 12 mm with storage bag , rescue kit includes descender, special rope, webbing slings, karabiners and storage bag , full body harness , insulated static ground , insulated telescopic stick , tarpaulin 10 x 12 , tarpaulin 18 x 12 , hot line tools trailer

Central Government/Public Sector

CTN :44754672

29 Apr, 2026 NA

Multi City - Multi State

Tender For supply of live line monitoring gauge (llmg or ohe height and stagger gauge) supported with android application for ohe height and stagger measurement for broad gauge line with ip-65 or above rating & 2 years oem warranty with storage case for complete assembly as per rdso specification no. rdso/ti0lko(ohe)/57/2020 dtd.20.12.2023. (note- compliance of all desired specification as in item description and rdso specification must be submitted/uploaded at the time of bidding tender). [ warranty period: 30 months after the date of delivery ]

Taper Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector