Latest taper shank drill Tenders | Government taper shank drill Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45224321

26 May, 2026 NA

Asansol - West Bengal

Tender For providing of custom bid for services - shifting of drill rigs and site preparation for mechanical & hydrostatic drills deployed at dharma gourangdi and mollarpur sub camps of cmpdi ri-i asansol situated in different location of west bengal and jharkhand for a per..

Central Government And Public Sector

CTN :45119002

19 May, 2026 4.08 Lacs

Champawat - Uttarakhand

Tender For supply of tap set adjustable handle 15inch length for m4 to m18 size , tap set adjustable handle 40inchlength for m18 to m35 size , tap set 14 mm , tap set 16 mm , tap set 18 mm , tap set 20 mm , tap set 27 mm , tap set 30 mm , tap set 8mm , tap set 10mm , tap set 12 mm , tap set 6 mm , drill bit 2 mm , drill bit 4 mm , drill bit 6mm , drill bit 8mm , drill bit 10 mm , drill bit 12 mm , drill bit 14 mm with taper shank , drill bit 16 mm with taper shank , drill bit 17 mm with taper shank , drill bit 18 mm with taper shank , drill bit 20 mm with taper shank , drill bit 22 mm with taper shank , drill bit 24 mm with taper shank , drill bit 26 mm with taper shank , drill bit 27 mm with taper shank , drill bit 28 mm with taper shank , drill bit 30 mm with taper shank , drill machine keyed chuck for 1.5 to 13mm drill bit size , indexable carbide thread turning inserts for right hand metric external thread for pitch 1 mm , indexable carbide thread turning inserts for right hand metric external thread for pitch 1.25 mm , indexable carbide thread turning inserts for right hand metric external thread for pitch 1.50 mm , indexable carbide thread turning inserts for right hand metric external thread for pitch 1.75 mm , indexable carbide thread turning inserts for right hand metric external thread for pitch 2.00 mm , indexable carbide thread turning inserts for right hand metric external thread for pitch 2.50 mm , suitable 1inchx1inch shank for indexable carbide insert for right hand metric external threading , inside spring caliper 6 inch , inside spring caliper 12 inch , outside spring caliper 12 inch , allen key set 1.5mm to 10mm ) /bid number : gem/2026/b/7446973 * /dated: 08-05-2026 & & / bid document 1 / 28

Central Government/Public Sector

CTN :45139483

18 May, 2026 NA

Kalka - Haryana

Tender For supply of hss taper shank drill bit size: 5mm confirming to specifications is: 5103-1969. [ warranty period: 12 months after the date of delivery ]

Central Government / Public Sector

CTN :45025646

07 May, 2026 NA

Angul - Odisha

Tender For supply of set of hss taper shank drill bit in different sizes. set consist of 8 items as given below, 1)drillbit size, 6 mm-01 no./set, 2)drill bit size, 7 mm-01 no./set, 3)drill bit size, 8 mm-01 no./set, 4)drill bit size, 9mm-01 no./set, 5)drill bit size, 10 mm-01 no./set, 6)drill bit size, 13 mm-01 no./set, 7)drill bit size, 14 mm-01 no./set, 8)drill bit size, 17 mm-01 no./set, make: addison or miranda or totem only. note:firm to submit authorised dealership certificate along with the tender, otherwise offer will not be considered. [ warranty period: 30 months after the date of delivery ]

CTN :43994952

07 May, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids.from original equipment manufacturers (oems) and/or authorised channel partners (cps)supply of goods, tools & equipment foran international standard itot in fitter tradeat iti tarsali, gujarat, india - ss and sc center lathe (all geared), design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics., design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic., design, supply, installation, commissioning, testing and training of advance factory automation training kits, application learning systems, hydraulic power saw machine, cnc turn centre, universal milling machine with minimum specification, vertical milling machine, cnc machining centre, cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders., surface grinding machine, universal tool and cutter grinding machine, interchangeable ratchet socket set, hand reamer adjustable cover, hand reamer taper, reamer parallel, set combination, micrometer (0-25), micrometer (25-50), micrometer (50-75), micrometer inside (0-25), vernier calliper (150mm), vernier height gauges, vernier bevel protractor, drill twist taper shank, drill chuck, wheel dresser, machine vice (4 inch), machine vice (6 inch), sleeve drill morse, bench vice, leg vice, dial test indicator, lathe tools hss tipped set, lathe tools bit hss, counter boring and counter sinking tool, arm strong type bit holder rh, arm strong type bit holder lh, arm strong type bit holder straight, straight edge, surface plate, marking table, universal scribing block, v- block pair, square adjustable, angle plate, spirit level, portable hand drill (electric), ss and sc center lathe (all geared), design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics., design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic., design, supply, installation, commissioning, testing and training of advance factory automation training kits, application learning systems, hydraulic power saw machine, cnc turn centre, universal milling machine with minimum specification, vertical milling machine, cnc machining centre, cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders., surface grinding machine, universal tool and cutter grinding machine, interchangeable ratchet socket set, hand reamer adjustable cover, hand reamer taper, reamer parallel, set combination, micrometer (0-25), micrometer (25-50), micrometer (50-75), micrometer inside (0-25), vernier calliper (150mm), vernier height gauges, vernier bevel protractor, drill twist taper shank, drill chuck, wheel dresser, machine vice (4 inch), machine vice (6 inch), sleeve drill morse, bench vice, leg vice, dial test indicator, lathe tools hss tipped set, lathe tools bit hss, counter boring and counter sinking tool, arm strong type bit holder rh, arm strong type bit holder lh, arm strong type bit holder straight, straight edge, surface plate, marking table, universal scribing block, v- block pair, square adjustable, angle plate, spirit level, portable hand drill (electric)

CTN :44959345

01 May, 2026 NA

Kolar - Karnataka

Tender For supply of hss parallel shank and taper shank drills : : - 7410000015 dia 1mm hss m2 ps drill , 7410000265 dia 2 point 6mm hss m2 ps drill , 7410000035 dia 3mm hss m2 ps drill , 7545800035 hss m42 material ps drill dia 3 point 00 mm , 7545800045 hss m42 material ps drill dia 3 point 50 mm , 7410031555 dia 15 point 5mm hss m2 ts drill

CTN :44923954

01 May, 2026 NA

Kanpur - Uttar Pradesh

Tender For supply of hss taper shank drill size dia 24mm,

CTN :44874680

27 Apr, 2026 NA

Medak - Telangana

Tender For supply of guhring make special hssco taper shank drill of guhring series no. gh345 of dia 15.00mm. make: guhring

CTN :44874781

27 Apr, 2026 NA

Medak - Telangana

Tender For supply of guhring make special hssco taper shank drill of guhring series no. sh 345 of dia 18.00mm. make: guhrin

Taper Shank Drill Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government / Public Sector