Latest taper shank Tenders | Government taper shank Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

CTN :45728195

07 Jul, 2026 NA

Jamshedpur - Jharkhand

Tender For supply of solid carbide drill size 17.5 mm.,taper shank, over all length 247 mm, flute length 130 mm. make: sandvik/seco/widia/extol/ ceratizit [ warranty period: 12 months after the date ofdelivery ] ]

CTN :45722356

09 Jul, 2026 NA

Palakkad - Kerala

Tender For 007410030013/taper shank drill dia 13.00 mm , 007410030125/taper shank drill dia 12.50 mm , 007410031016/taper shank drill dia 16.00 mm , 007410031015/taper shank drill dia 15.00 mm , 007410031014/taper shank drill dia 14.00 mm , 007410030135/taper shank drill dia 13.50 mm

CTN :45416078

13 Jul, 2026 NA

Cuttack - Odisha

Tender For corrigendum : supply installation and commissioning of mechanical equipment for different govt itis and polytechnics of odisha - lathe s.s &s.c. (all geared type) , solid works , universal milling machine , powersaw machine , pipe bending machine , tool and cutter grinder , pillar type drilling machine , double ended pedestal grinder , air compressor , surface plate - granite , battery operated pallet truck , cylindrical grinding machine , radial drilling machine , absorption and stripping , equipment , shearing machine , surface grinding machine , hyadraulic surface grinding , machine , hand drill machine , horizontal milling machine , demarcation equipment , universal cylindrical grinding , machine , gear pump test rig , battery operated order picker , sensitive bench drill machine , shaping machine , hydraulic pressure testing , machine , plotter , vertical milling machine , power hacksaw machine , co-ordinate measuring machine , screw pump , breaker machine , battery operated fork lift , band saw machine , hdpe butt fusion welding machine , portable drilling machine , horizontal milling machine , turret ram milling machine , silicon carbide grinder , profile projector , slip gauge as johnson metric , set , vertical milling machine , slotter machine , hydraulic pipe bending machine , electric pressure , test pump machine

Central Government/Public Sector

CTN :45716564

08 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of various type hss m35 drill c c - ,material-hss m35, dia 10.2 mm,one piece construction.other details as per corporate standard aa6312011 , morse taper shank twist drill ,material-hss m35, dia 10.5 mm,one piece construction.other details as per corporate standard aa6312011 , morse taper shank twist drill ,material-hss m35, dia 12.0 mm,one piece construction.other details as per corporate standard aa6312011. , morse taper shank twist drill ,material-hss m35, dia 14.0 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 16.0 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 17.5 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 18.0 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 18.5 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 19.0 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 20.5 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 21 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 21.5mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 22mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 24.5mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 24.75mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 25.0 mm,one piece construction.other details as per corporate standard aa6312013. , morse taper shank twist drill ,material-hss m35, dia 25.5 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 26 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 26.5 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 27.25 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 27.5 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 27.75 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill //bid details 4 / 119 standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 28 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 28.5 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 29.5 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 30 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 30.5 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 30.75 mm,one piece construction.other details as per corporate standard aa6312015 , morse taper shank twist drill ,material-hss m35, dia 31 mm,one piece construction.other details as per

Central Government/Public Sector

CTN :45531237

04 Jul, 2026 NA

Ajmer - Rajasthan

Tender For corrigendum : supply of hss taper shank twist drills (short series) (q3)

Central Government/Public Sector

CTN :45704369

06 Jul, 2026 NA

Palakkad - Kerala

Tender For supply of twist drill taper shank hss diameter- 23 mm make- it or addison or yg1 or totem , twist drill taper shank hss diameter- 24 mm make- it or addison or yg1 or totem , drill hss taper shank mt3 diameter- 25 mm make- it or addison or yg1 or totem , drill hss taper shank diameter- 26.6 mm make- it or addison or yg1 or totem , drill hss taper shank diameter- 36 mm make- it or addison or yg1 or totem , drill hss taper shank diameter- 42 mm make- it or addison or yg1 or totem

Central Government/Public Sector

CTN :44286722

01 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras tender for supply of twist drill morse taper shank -twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank , , twist drill-morse taper shank

Central Government / Public Sector

CTN :45471878

03 Jul, 2026 NA

Nizamabad - Telangana

Tender For corrigendum : supply of hss taper shank twist drills (short series) (q3)

Central Government/Public Sector

CTN :45712757

18 Jul, 2026 2.90 Lacs

Medak - Telangana

Tender For hss p/s counter sink drill included angle 90 deg dia 5.0 , hss p/s counter sink drill included angle 90 deg dia 6.0 , hss taper shank twist drill dia 22.0mm

Taper Shank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector