Latest taper shoe Tenders | Government taper shoe Tenders

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

CTN :44042341

27 May, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras supply of prelaminated mdf board (q3) , foam size 6 feet x 3 feet 100 mm th 40 density , veneer sheet 3mm of size 8 feet x 4 feet of approved shade , veneer sheet 6mm th of size 8 feet x 4 feet of approved shade , top of table dinning size 2100 mm x 1050 mm for 8 pers size of 18mm bwr grade i , laminated sheet 1mm thick size 8 feet x 4 feet , 1st class timber wood beating 20mm x 4mm thick , teak woodlegs size 35mm w x 40mm h x 450mm i for chair dining , arm rest teak wood of size 75 x 25 x 610mm for chair easy duly french polished , lakhdana , teakwood legs size 750mm h x 90 mm h x 45mm b for table dining 6 8 pers , 5mm thick glass sliding for dressing table ladies fd 251 size 300 x 300mm , piano type continuous hinges 20mm wide 5m long , teak wood front rail side 100mm i x 35 mm w for sofa , teak wood front legs size 75mm i x 35 mm b x 300 mm h for sofa , top of table peg of size 450mm x 300mm x 380mm madeup of 18mm th bwp grade a , teak wood arms rest of size 70mm x 30mm x 700mm , 75mm long s s handle for ladies dressing mirror , teak wood front legs size 55mm i x 30 mm b x 685mm h for chair writing , nuts and bolts 2 and half inch x 3 by 16 , bee wax white powder , s s 50mm knob hnadle for bed side table map , mirror 5 point 5 mm thick size 1200mm x 600mm for gents mirror , front teak wood leg of size 65 x 35 x 935 for chair dining wooden , hard rubber shoe 20mm dia , nut and bolt 100mm long , nails 2 inch , nails 3 inch , teak wood rear leg of size 70mm x 30mm x 700mm , teak wood legs for table writing as per sample , hard pvc ring 20 mm dia for chair as per sample , hnadle cp 150 mm for almirah with shelves , wooden screw shaved lead 35 mm 8 no 200 nos in a pkt , cp decorative handle 100 mm for almirah , wooden screw shaved lead 50 mm 8 no 200 nos in a pkt , wooden screw shaved lead 60 mm 8 no 200 nos in a pkt , nails 1 and half inch , glass 5mm th of size 300mm x 440mm for hat stand , screw 1 inch half threaded galvanized screw per pkt 200 nos , nails 4 inch , teak wood rails size 20mm b x 40 mm i x 450 mm h for table peg , panel pin 25mm with head , screw 2 and half inch half threaded galvanized screw per pkt 200 nos , screw 2 inch half threaded galvanized screw per pkt 200 nos , panel pin 25mm w o head , wooden screw shaved head 3 by 4 inch 200 nos in a pkt , screw 1 and half inch half threaded galvanized screw per pkt 200 nos , wooden screw shaved lead half inch 200 nos in a pkt , wooden screw shaved head 25 mm 6 no 200 nos in a pkt , screw 3 inch half threaded galvanized screw per pkt 200 nos , panel pin 3 by 4 x 19 , panel pin 20mm w o head , bow handle 100 mm aluminium , clips for fixing almirah shelves , panel pin 19 x 1 , veneer sheet 4mm th of size 8 feet x 4 feet of approved shade , foot rest for bed made out of seasonal teak wood with arm with 4mm plywood , head rest for bed made out of seasonal teak wood with 4mm plywood //bid details2 / 47

Central Government/Public Sector

CTN :45174699

26 May, 2026 NA

Madurai - Tamil Nadu

Tender For auction sale of pway scrap - condemned, released & un-serviceable cl.iii rail 52kg-2370.83mtrs-123.022mts,rail 90r-472.03mtrs-21.073mts.[total-144.095mts].location-available at km.562/200-300 lh side b/w ohe mast no.562/3-svks/1001 at sse/p.way/svks office behind /svks yard. not for sale:-i) fish plate-6nos,(s.no.106,336,400),joggled fp-2nos(s.no.105)bolt nut-8nos. ii) 52kg rails-0.80 & 0.72mtrs.iii)without head attached to 52kg rails s.no.179-0.65,251-0.38,262-0.35,440-0.80,443-0.35mtrs. iv) without head attached to 90r s.no.8-0.50,15-0.50,67-0.42,68-0.43mtrs. note:- 1) sl.no.421 to 472 rails are u/s(52kg).2)sl.no.75 to 80 rails are u/s(90r),all other materials near to this lot to be treated as nfs, since svks yard.3)road approach available. 4)from main road to location & narrow and thar road lead to be location.5)any other attachment to be cut and handed over to the custodian at the time of delivery.6).the above rails to be delivered on linear measurement basis, 7) in all cases, i.e. crane loading/ manual loading, when the length of rails exceeds 5mtrs length, the purchaser (by engaging his own labourers) are permitted to cut the rails to convenient lengths of not less than 2.5mtrs and hand over the non-ferrous and excess quantity to the custodian, 8)any other material in the lot other than the items earmarked for sale as per d.o. should be handed over to the custodian. s1539.udm lot no.089618-25-00001 dt.20.03.26.hsn code.720429.

CTN :45285431

11 Jun, 2026 NA

Ratnagiri - Maharashtra

Tender For carrying out through usfd testing of running rails, welds , including level crossings, lead portion of points and crossings and scabbed rail testing of all types of rails by nbc (need based concept) method under traffic conditions as per provisions of ir's usfd manual and specifications for ultrasonic testing of rails and welds with latest correction slips and related instructions, duly marking defects, submission of daily reports and storing back up data as specified and directed with contractor's usfd machine. the srt/drt machine should have minimum of 9 probes (including 37 degree forward/backward probe) with b-scan facility for detecting bolt hole cracks in senior regional engineer, ratnagiri region of konkan railway between km 0/800 to 378/10. (computer no. 71489) (rate quoted shall be excluding gst. gst will be payable as applicable).

CTN :45036976

04 Jun, 2026 NA

Saran - Bihar

Tender For collection, loading & transportation of elastic rail clips (erc), qty.3500 mts from various locations of indian railways to rail wheel plant/bela, saran, bihar-841221 under distance slab 501-1000 km (taking average lead distance 750 km).

CTN :45036967

29 May, 2026 NA

Saran - Bihar

Tender For transportation of scrap cut rails. the above work involves (a) collection of scrap rails at various railway units/locations (b) cutting of the scrap rails to a length size measuring upto 3 (three) metres (c) loading of the scrap cut rail into the vehicle (d) transportation of scrap cut rail from various locations of indian railways to rail wheel plant, bela, saran, bihar-841221 under distance slab 501-1000 km (taking average lead distance 750 km).

Central Government And Public Sector

CTN :45134678

20 May, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of pway scrap - total qty.= 23.001 mt, description: - lot no.-je/pw/c/rig/01;u/s 52 kg f/cut rail(1.839 mt) at bef yard, lot no.-je/pw/c/rig/02;u/s g/joint 52 kg(1.95 mt) at km-602/17a-19a, lot no.-je/pw/c/rig/03;u/s 60 kg t/rail(0.648 mt) at km-602/17a-19a, lot no.-je/pw/c/rig/04;u/s 52 kg t/rail(0.563 mt) at km-602/17a-19a, lot no.-je/pw/c/rig/05;u/s 60 kg check rail(1.434 mt) at 602/19a-jsw/01, lot no.-je/pw/c/rig/06;u/s g/joint 60 kg(1.816 mt) at 602/19a-jsw/01, lot no.-je/pw/c/rig/07;u/s g/joint 60 kg(2.27 mt) at bef/1009n-1013n, lot no.-je/pw/c/rig/08;u/s sej t/rail 60 kg(0.56 mt) at bef/1009n-1013n, lot no.-je/pw/c/rig/09;u/s 60 kg check rail(0.478 mt) at bef/1009n-1013n, lot no.-je/pw/c/rig/10;u/s 60 kg t/rail(1.944 mt) at bef/1009n-1013n, lot no.-je/pw/c/rig/11;u/s 60 kg cms xing 1 in 12(1.035 mt) at bef/1009n-1013n, lot no.-je/pw/c/rig/12;u/s g/joint 60 kg(2.724 mt) at 601/3a-5a, lot no.-je/pw/c/rig/13;u/s sej t/rail 60 kg(0.84 mt) at 601/3a-5a, lot no.-je/pw/c/rig/14;u/s g/joint 60 kg(0.454 mt) at 601/3a-5a, lot no.-je/pw/c/rig/15;u/s sej t/rail 60 kg(0.84 mt) at 600/25a-601/1a, lot no.-je/pw/c/rig/16;u/s sej stock rail 60 kg(0.882 mt)at 600/25a-601/1a, lot no.-je/pw/c/rig/17;u/s g/joint 60 kg(2.724 mt) at 600/19n-21n. remarks:- 1) material to be sold on "as is where is basis" and will be delivered in weight only. 2) materials can be moved by road within a lead of 50 meters from stacking point. 3) tractor/trollies is needed during delivery of the sold materials. 4) the lot has been offered manually and can be lifted in fair season only.

Central Government And Public Sector

CTN :45134677

20 May, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of pway scrap - total qty. = 25.296 mt, description: - lot no.-je/pw/c/rig/18, u/s 60 kg rail closer at bef/1045n-602/13n. remarks:- 1) material to be sold on "as is where is basis" and will be delivered in weight only. 2)materials can be moved by road within a lead of 50 meters from stacking point. 3) tractor/trollies is needed during delivery of the sold materials. 4) the lot has been offered manually and can be lifted in fair season only.

Central Government And Public Sector

CTN :45134675

20 May, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of pway scrap - total qty. = 1617.20 mtrs., description: - lot no.-01, us 52 kgs rail above 1 mtr at km-jsw/05-06(48.48 mtrs.), lot no.-02, us 52 kgs rail above 1 mtr at km-602/17a-19a(160.71 mtrs.), lot no.-03, us 52 kgs rail above 1 mtr at km-602/11-bef/1050n(779.88 mtrs.), lot no.-04, us 52 kgs rail above 1 mtr at km-bef/1045n-602/11(340.25 mtrs.), lot no.-05, us 52 kgs rail above 1 mtr at km-bef/1043n-1045n(217.35 mtrs.), lot no.-06, us 52 kgs rail above 1 mtr at km-bef/1009n-1013n(70.53 mtrs.) remarks:- 1) material to be sold on "as is where is basis" and will be delivered in mtrs. only. 2) any material found attached with rail will be handed over to je/pw/con/rig during delivery. 3) materials can be moved by road within a lead of 50 meters from stacking point. 4) tractor/trollies is needed during delivery of the sold materials. 5) the lot has been offered manually and can be lifted in fair season only.

corporations/Associations/Others

CTN :44948739

15 May, 2026 34.19 Lacs

Ajmer - Rajasthan

Tender For corrigendum : supply of ballast rake , cross pen hammer 500 gm , light weight spanner for 60 kg rail. , log line with 20 kg lead ball . , piano wire with clamps , probing rod , rail tongue , schmidts hammer , versine kit , craw bar , drill bits of hss , hammer 3kg , hydraulic track jack 15 ton , inspection cum chipping hammer , retro reflective tape 45m each roll yellow , shovel with handle , straight edge , grinding wheel , abrasive rail cutter disc , hydraulic track jack 15 ton , pan mortar , rail dolly , rail thermometer , small testing hammer , speed restriction board 60 75 , stop board with stand and chain , plumb bob , chisel , flexible pipe 1 for gardening , mirror 10x15 cm , screw driver set , shears for gardening , trowel for gardening , whistle board , whistle , combination plier

Taper Shoe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

corporations/Associations/Others