Latest tapping screw Tenders | Government tapping screw Tenders

Central Government/Public Sector

CTN :40080303

30 Apr, 2025 NA

Multi City - Multi State

Tender For supply of csk hd tapping screw st 4.8x32-f

Central Government/Public Sector

CTN :40080912

14 May, 2025 NA

Multi City - Multi State

Tender For supply of locking pin for hydraulic

CTN :40081037

16 May, 2025 NA

Multi City - Multi State

Tender For supply of procurement of hardened slotted pan head tapping screw etc.

Central Government/Public Sector

CTN :40064898

03 May, 2025 18.83 Lacs

Champawat - Uttarakhand

Tender For supply of spares for grw make cooling pumps for tps - pump shaft with key part no 3 , impeller part no 4 , neck ring or casing ring part no 5 , sleeve part no 6 moc ss410 , sleeve locking nut part no 7 , cowl nut part no 8 , lantern ring part no 9 , water deflector part no 11 , brg housing front cover part no 12 , nd end brg housing part no 14 , nd side brg housing spacer part no 15 , lock nut and lock washer part no 18 , impeller key part no 19 , coupling key part no 20 , distance piece part no 21 , stuffing box bush part no 24 , coupiling pin bush with rubber part no 27

CTN :40065354

08 May, 2025 NA

North 24 Paragana - West Bengal

Tender For tender for supply of cotter pin , washer 8(plate-21) , small washer(plate-2) , washer 6(plate-7) , spring compression (plate-2) , bushing locking handle (plate-4) , bolt m6x40(plate-7) , o ring 25.8x2.65(plate-23) , circular plug(plate-4) , washer 14 , o ring 44x2(plate-24) , gasket fuel pump (plate-15) , damper water pipe (plate-7) , fuel pipe a(plate-15) , plate temp controller (plate no-12) , o ring (plate-23) , element , filter , water seal (plate-7) , gasket(plate-17) , seal inlet pipe , gasket thermostat (plate-14) , tie in(plate-17) , pin float(plate-17) , water inlet a (plate-7) , o ring a (plate-23) , jacket , startup motor cable(1 2 - electrical syste , strainer (plate-20) , link rod iron core (plate-16) , pipe , fuel (plate-15) , o ring b (plate-23) , semi circular key , connecting rod ltd plate(plate-18) , semicircular key (plate-23) , wire earth lead (9 - electrical system i) , wiring spring wiring link(plate-17) , connecting rod shift cam(plate-5) , upper seal outlet manifold(plate-3) , handle jacket shift (plate no-1) , jacket relay(plate no-12) , gasket(plate-17) , o ring(plate-17) , gasket cylinder cover (plate-14) , ltd plate arrester (plate-17) , throttle cable assy (plate-2) , shapnel air choke(plate-17) , nut flywheel(plate-11) , fuel connector assy (plate-bottom cowling) , start line (plate-18) , tube , water(plate-7) , bushing nylon (plate-7) , seal(plate-7) , engine stop swtich assy(plate-bottom cowling) , driven wheel assy (plate-5) , gasket a intake valve seat(plate-24) , float(plate-17) , gasket oil cup(plate-17) , stopper , hang rope assy , gasket outer cover (plate-14) , gasket inner cover (plate-14) , swing shaft assy (plate-15) , connecting rod assy magnato (plate-5) , oil seal 25x48x8(plate-14) , niddle valve(plate-17) , connecting rod carburetor (plate-15) , shell , water pump (plate-7) , gasket outlet manifold (plate-3) , gasket c inlet valve seat(plate-24) , exhaust clap board s (plate-3) , filter cap assy(plate-15) , eng stop switch assy (plate-4) , shift rod assy(plate-5) , push rod assy (plate-5) , engine , stop switch assy (plate-21) , cable startup stator (12-electrical system iv) , fixed plate water pump (plate-7) , nut , spark plug , ball bearing(plate-7) , bkt rh(plate-18) , impeller assy (plate-23) , bkt lh(plate-18) , locking plate assy shift lever(plate-5) , bracket ignition (plate-9) , bush(plate-2) , gasket engine(plate-14) , support bottom(plate no-1) , rubber seal top cowling(plate-19) , limitative rod assy (plate-1 , sl no-46) , lighting coil (plate -11) , accelaretor bar(plate-17) , swing rod assy (plate-5) , bracket starter up motor , steering handle assy (plate-2) , gasket cylinder head (plate-14) , spacer , outer plate (plate-23) , coil assy magneto (plate-11) , intake silencer assy(plate-24) , rectifier assy(plate-12) , handle shift gear(p-10) , base drive shaft(plate-7) , seal upper casing(plate no-1) , shell inner(plate-23) , iron core(plate-16) , absorber bkt (plate no-1) , shell assy water pump (plate-7) , starter switch assy (plate no-12) , fuel pump assy (plate-14) , outlet manifold(plate-3) , oil tube assy , high pressure assy (plate-9) , high pressure assy (plate-9) , piston(plate no-13) , wire assy controller (plate no-12) , cable , power(12 - electrical system iv) , steer bracket assy(plate no-1) , cdi unit , electro magnetic magnet assy(plate-16) , starter assy(plate-18) , fuel tank assy , carburetor assy (plate-17 sl no-42) , bottom cowl(plate-4) , top cowling assy (plate-19) , upper casing l(plate-3) , lower casing (plate-7) , control box assy (plate-21)

corporations/Associations/Others

CTN :39816463

25 Apr, 2025 NA

Ahmedabad - Gujarat

Tender For corrigendum : tender for supply of malleable spare and sheet metal components - nut (frt and middle pro shaft)(for transmission- 1515/55 bs-iv) , nut propeller shaft (for transmission- tata 1512/55 , 1618/62 bs-iii and 1618/62 bs-iv) , clutch release yoke(for clutch - tata1515/55 bs-iv) , ball pin (adjuster type) bs3/4/6 (for clutch- tata 1618/62 , 1515/55 bs-iv and 1618/57 , 1618/62 bs-vi / obd-ii bs-vi) , set screw (for clutch- tata1515/55 bs-iv) , locking wire (for clutch- tata 1618/62 bs-iv and 1618/57 , 1618/62 bs-vi / obd-ii bd-vi) , spring collar bracket (for front spring- tata 1512/55 bs-iii and 1515/55 bs-iv) , bracket , front spring hanger fr-lh and rr-rh (for front weveller spring- tata 1618/62 bs-iii and 1515/55 , 1618/62 bs-iv) , bracket , front spring hanger fr- rh and rr-lh (for front weveller spring- tata 1618/62 bs-iii and 1515/55 , 1618/62 bs-iv) , assy. fuel tank cap complete (for tata ultra 7.5t mini bus bs-iii and bs-iv) , center bearing bracket 192 mm pitch (for transmission- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring hanger bracket , front frd (rubber bush) (for front /rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring pin (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , assy rear shackle with rubber bush (for rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , threaded bush (rubber bush) (for rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring hanger bracket (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , spring pin (for rubber bush) bs-3/4/6 (rear suspension for tata ultra 7.5t mini bus bsiii and bs iv) , spring pin (for rubber bush) (for front/rear suspension- tata ultra 7.5t mini bus bs-iii and bs-iv) , assy. rubber bush (svil-dia 22)(for rear suspension for tata ultra 7.5t mini bus bs-iii and bs-iv) , assy. radiator cap (for tata 1515/55 bs-iv) , ball pin fixed pivot (for clutch booster ley. vk2011.4tgr and tf2012.otgr bs-vi/obd-ii bs-vi) , bracket-front spring wev front - front lh (front spring for ley. vk2011.4t6r and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring weveller rh(front spring for ley. vk2011.4t6r and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring wev front - rear rh (for front spring le vk2011.4tgr and tf2012.otgr bs-vi / obd-ii bs-vi) , bracket-front spring wev front - rear lh vk2011.4tgr and tf2012.otgr bs-vi / obd-ii bs-vi) , cb bracket spl55 (for propeller shaft ley. mini ls1508.7t6r bs-vi) , cap. fuel tank (hcv) (for diesel tank cap- eicher 3008 mini bus bs-iii and bs-iv) , pin (for rear suspension- eicher 3008 mini bus bs-iii and bs-iv) , pin sup.(for front suspension- eicher 3008 mini bus bs-iii and bs-iv) , bush , suspension mcv (for fr and rr suspension- eicher 3008 mini bus bs-iii and bs-iv) , shackle assy , spring (for front/rear suspension- eicher 3008 mini bus bs-iii and bs-iv) , spherical bush dia-10 (for gear shift lever- eicher 3008 mini bus bs-iii and bs-iv) , center bearing bracket (for transmission- eicher 3008 mini bus bs-iv bus bs-iii and bs-iv)

Central Government/Public Sector

CTN :39753294

21 Apr, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of fasteners - aa1214335020-brass wire mesh , hy1201015685-cu tub , hy7126999070-tapping screw , oe9717034010-hex sochead cap screw , hy7141165444-stud b p m10x160 , hy7141165983-stud b p m10x45 , oe9751027080-bolt hex , oe9751027136-bolt hex , oe9751027233-bolt hex , oe9751027306-bolt hex , oe9751027373-bolt hex , oe9751027403-bolt hex , oe9751027420-bolt hex , oe9751027500-bolt hex , oe9751028108-bolt hex , oe9751028116-bolt hex , oe9751029015-bolt hex , oe9751029023-bolt hex , oe9751030013-csk skt hd screw , oe9751032040-bolt hex soc hd , oe9751039029-tapping screw , oe9751041031-nut hex , oe9751042070-nut hex, lock nut , oe9751045010-nut hex, self lock , oe9751049067-washer, multi tooth external lock

CTN :40030362

16 May, 2025 2.50 Crore

Ernakulam - Kerala

Tender For empanelling of ortho implant items - k-wire 1.2 mm, 1.mm, 1.6mm,1.8 mm,2 mm, 3.5 dcp-5, 6,7,8,9,10,11,12, hole, 3.5 lcp-5, 6,7,8,9,10,11,12, hole, 3.5 cortical screw-full set, 3.5, locking coritical,locking cancellous screw, ellis t. plate -3.5 system -3, 4, 5, 6, 7[ordinary and locking ], 4.5 narrow dcp -4,5,6,7,8,9,10, hole, 4.5 narrow lcp -4,5,6,7,8,9,10 hole, 4.5 cortical screw-full set, 4.5 locking, cortical locking,cancellous screw-full set, 4.5 broad dcp-4,5,6,7,8,9,10,11 hole, 4.5 broad lcp-4,5,6,7,8,9,10,11 hole, 4.5 cortical screw, locking cortical, locking cancellous screw-full set, philos plate [ ordinary and locking ] -3,4,5,6,7b hole, 3.5 cortical locking, locking cancellous screw - full set, 1/3 tubular plate[ ordinary and locking -4,5,6,7,8,9,10,11,12 hole, 3.5 recon plate -4,5,6,7,8,9,10,11,12 hole, 4.5 recon plate-4,5,6,7,8,9,10,11,12 hole, distal humerus locking plate [r] and [l]-full set upto 14 hole, distal tibial hybrid locking plate [full set] with screw upto 14 hole, proximal tibial locking plate-full set with screw, 4.5 t. plate-full set, liss plate (full set), 4.5 l plate-full set, steinman pin -3.5 mm,4 mm,4.5 mm,5mm, schanz pin -4.5 mm and 3.5mm, universal clamp - full set, universal rod-full set, rod to rod clamp = full set, dhs-full set-, ender nail 3.5& 4.5-full set, imsc nail implant with instrumentation- full set, pfna2-full set implant with instrumentation, pfna3-full set implant instrumentation, amp-full set, amp-full set-narrow stem, bipolar prosthesis-full set, modular bipolar prosthesis-full set, dcs full set, proximal femur locking plate-full set, olecronan locking plate-full set with screw, calcaneum lcp-full set with screw, clavicle lcp full set with screw, distal. clavicle lcp full set with screw, rush nail 2mm, 2.5mm ,3mm,3.5mm, 4mm,4.5mm, radial square nail 1.5mm, 2mm,2.5mm,3mm,3.5mm,4mm, ulnar square nail 1.5mm, 2mm,2.5mm,3mm,3.5mm,4mm, acetabular reconstruction plate-full set with screw matta, 1.7mm mini lcp-full set, pedicle screw with implant and insrtumentation [titanium-polyaxial] gesco, acl reconstruction implant+insrtumentation -arthrex (cemented & uncemented), drill bit-2mm,2.5mm,2.7mm,3.2mm,4mm,6mm, locking drill bit-2mm,2.5mm,2.7mm,3.2mm,4mm,6mm, total knee replacement-implant+ instrumentation, revision total knee replacement-implant+ instrumentation, total hip replacement-cemented & uncemented implant+ instrumentation, revision total hip replacement-implant+ instrumentation, 61. total shoulder replacement implant+ instrumentation, 62. reverse shoulder replacement implant+ instrumentation, 63. total elbow replacement implant+ instrumentation, 64. radial head relacement implant+ instrumentation, 65. variable angle lcp distal femur full set, 67. il nail femur, 68, il nail tibia, 71. modified jess set, 72. lrs, 73. ilizarov set- full set, 74. thomas splint-[all sizes ] buelcacl pappas, distal. clavicle universal nail extraction set, tens nail full size with instrumentation, broken implant removal set, clavicle brace full set, tennis elbow strap, special / ordinary shoulder immobilizer, cervical collar- hard/soft, philadelphia collar, taylors brace, ls corset, wrist splint right/left, knee immobilizer, crepe bandage 5/7/8/10/15 femur,tibia,forearm,humerus, dynaplast 10/15, forearm splint, wrist drop splint 80 t0 97 full set, foot drop splint, finger cot splint, knuckle bender splint, thumb spica splint, arm pouch, ankle binder, wrist binder, walker foldable & fixed, axillery critches, elbow critches, hip u drape, orthokit, cautery lead, suction tip, romovac suction drain 10, 12, 14, skin stapler, vicryl os needle full set, ethibond full set, bone wax, antibiotic bone cement 20 gm, 40 gm, stimulan 5gm , 10gm, 25gm, g bone granules and block, pulse lavage, cling drape, stockinette, knee o drape, arthroscopic drape 10, 12, 14, 16, 18, surgical mop, sofratulle [bactigrass ]

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

State Government

CTN :40052198

28 Apr, 2025 30.00 Lacs

Jaipur - Rajasthan

Tender For gram panchayat govindpura me nrega yojna meterial supply tender 2025-26-, , bandhani , , bhisti , , blacksmith 1st class , , and , , blacksmith 2nd class , , and , , carpender is great , , and , , carpenter 2nd class , , chowkidar , , beldar , , coolie , , fitter(grade1) , , assistant fitter or 2nd class fitter , , glazier , , mason(for plaster of paris work) ist class , , mason (brick layer) ist class , , mason (brick layer)2nd class , , mason (for plain stone work) 2nd class , , mason (for ornamental stone work) ist class , , driver (for road roller, concrete mixer, truck etc) , , mate , , sewer man , , mistry , , painter , , rock excavator , , rock breaker , , rock hole driller , , stone chiseller , , sprayer (for bitumen, tar etc) , , skilled beldar (for floor rubbing etc.) , , white washer , , nozzel man/gun man , , mason (average) , , carpenter (average) , , operator (pile/special machine) , , skilled torch operator for laying tack , , technician , , helper (technician) , , labour for fabrication of upvc extruded casement/sliding windows and doors including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etc. , , labour for installation of upvc extruded casement/ sliding windows and doors including scaffolding , , security guard without gun (8 hours shift duty per day) , , security guard with gun (8 hours shift duty per day) , , mali (semi-skilled) , , earth carriage 50 m head load 1.2.2 , , manure/sludge carriage 50 m head load 1.2.3 , , , r.c.c hume pipe with collar np 3 1200 mm dia , , r.c.c hume pipe with collar np 3 1000 mm da , , r.c.c hume pipe with collar np 750 mm dia , , r.c.c hume pipe with collar np 600 mm dia , , r.c.c hume pipe with collar np 450 mm dia , , r.c.c hume pipe with collar np 300 mm dia , , steel conduit ?s? marked 20 mm da , , steel conduit isi marked 25 mm dia , , tar (charcol) , , pvc water tank with cover (is: 12701-1989) , , 13/0.20mm twin core pvc flexible copper cable with cover , , steel fastner 6 mmx 75 mm , , pvc conduit pipe isi mark 25 mm dia , , pvc conduit pipe isi mark 20 mm dia , , junction box 20 mm two way , , junction box 20 mm one way , , junction box 25mm two way , , junction box 20 mm one way (pvc) , , module g.i. box 3 module , , module g.i. box 2 module , , module base and cover plate 2 module , , module base and cover plate 3 module , , moduler switch one way, isi mark s.p 15/16 amp. , , modu?er switch one way, isi mark s.p 5/6 amp. , , module socket outlet, isi marked 3 pin 5/6 amp , , module socket outlet, isi marked 6 pin 15/16 amp , , m.c.b. db 2 2 way, spn single door , , m.c.b. db 2 4 way spn single door , , m.c.b. db 2 6 way, spn single door , , g.i. pipe (midume pipe) 15 mm dia , , g.i. pipe (midume pipe) 40 mm dia , , copper wire 8 swg (4mm dia) (0.117 kg/m) , , ci/ms cover plate connected with locking pattern and frame , , marbal stone (rajnagar ii quality/local 20 mm thick) more than 2300 sqcm , , marble stone (makarana 20mm thick) more than 2300 sqcm , , kota stone polished (one side polished) up to 900 sqcm , , stone aggregate 40mm thick (cruser broken) (deduct voids 1/11) , , sand stone for dpc, sill, coping, lintel, tand, almirah etc. 25mm to 40mm thick , , sand stone for dpc, sill, coping, lintel, tand, almirah etc. 40mm to 50mm thck , , unpoliced rough kota stone up to 900 sqcm , , painter , , person for materiel loading and unloading (rates as per rdd labour) , , 63-40mm crushed stone aggregate (cut voids 1/11) , , person for materel loading and unloading (rates as per rdd labour) , , suplying of polythene bags including transporation , , supplying of goats manure for filling of polythene bags including transportation , , supplying of clay soil for filling of polythene bags includind transportation , , supplying of sandy soil for filling of polythene bags including transportation , , plastic threaded and transparent pipe of 3/4 inch dia , , supplying of insecticide liquid including transportation

Tapping Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government