Latest tar felt work Tenders | Government tar felt work Tenders

corporations/Associations/Others

CTN :45188569

25 May, 2026 NA

Valsad - Gujarat

Tender For bid documents for annual rate for purchasing vehicle spare part etc for valsad nagarpalika valsad.(2026-27) - hitachi machinefor rent, per hour rate with driver, tractor-trailerfor rent, daily rental rate with driver and diesel, tractor-trailerfor rent, daily rental rate with 4 laborers, jcbfor rent, per hour rate with driver, asphalt/tar balls, fog generating machinelarge (40 liter tank), fog generating machinelarge (5 liter tank), spraying pump (manual) 18 to 20 liters, spraying pump (battery charging) 18 to 20 liters, raincoatgood quality single fabric, tire size 600 x 16 ( mrf , appolo), tire size 900 x 16 ( mrf , appolo), tire size 12 x 4 x 28 ( mrf , appolo), tire size 13 x 6 x 28 ( mrf , appolo), tire size 16 x 6 x 28 ( mrf , appolo), tire size 7 x 50 x 16 (rear) ( mrf , appolo), tempo tire size- 145 x r x 12 ( mrf , appolo), drainage rods(3.25 inch feet), aamliyu(3.25 inch feet), jalebi(3.25 inch feet), vacuum pipegood quality isi mark, vacuum pipegood quality isi mark, tv set-top box(rate with stand and fitting), tractor mounted road sweeper machine, manually operated small road sweeper machine, 84584 - tractor bearingskf/taxpin, 32213 - trailer bearingskf/taxpin, 3984 - trailer bearingskf/taxpin, 462/453 - trailer bearingskf/taxpin, 25877 tractor bearingskf/taxpin, 1988 - tractor bearingskf/taxpin, air cleaner(as per model) - original genuine parts, silencer(as per model) - original genuine parts, tractor canopy/roof(as per model) - original genuine parts, tractor headlight(as per model) - original genuine parts, radiator(as per model) - original genuine parts, tractor dish 600/16 - original genuine parts, tractor dish 12-4-28 - original genuine parts, tractor packing set(as per model) - original genuine parts, head gasket(as per model) - original genuine parts, piston ring(as per model) - original genuine parts, piston(as per model) - original genuine parts, tractor fan belt(as per model) - original genuine parts, hydraulic pipesmall/large, hydraulic jack seal, spindle bearing(as per model) - original genuine parts, tractor seat(as per model) - original genuine parts, hitachi machinefor rent, per hour rate with driver, tractor-trailerfor rent, daily rental rate with driver and diesel, tractor-trailerfor rent, daily rental rate with 4 laborers, jcbfor rent, per hour rate with driver, asphalt/tar balls, fog generating machinelarge (40 liter tank), fog generating machinelarge (5 liter tank), spraying pump (manual) 18 to 20 liters, spraying pump (battery charging) 18 to 20 liters, raincoatgood quality single fabric, tire size 600 x 16 ( mrf , appolo), tire size 900 x 16 ( mrf , appolo), tire size 12 x 4 x 28 ( mrf , appolo), tire size 13 x 6 x 28 ( mrf , appolo), tire size 16 x 6 x 28 ( mrf , appolo), tire size 7 x 50 x 16 (rear) ( mrf , appolo), tempo tire size- 145 x r x 12 ( mrf , appolo), drainage rods(3.25 inch feet), aamliyu(3.25 inch feet), jalebi(3.25 inch feet), vacuum pipegood quality isi mark, vacuum pipegood quality isi mark, tv set-top box(rate with stand and fitting), tractor mounted road sweeper machine, manually operated small road sweeper machine, 84584 - tractor bearingskf/taxpin, 32213 - trailer bearingskf/taxpin, 3984 - trailer bearingskf/taxpin, 462/453 - trailer bearingskf/taxpin, 25877 tractor bearingskf/taxpin, 1988 - tractor bearingskf/taxpin, air cleaner(as per model) - original genuine parts, silencer(as per model) - original genuine parts, tractor canopy/roof(as per model) - original genuine parts, tractor headlight(as per model) - original genuine parts, radiator(as per model) - original genuine parts, tractor dish 600/16 - original genuine parts, tractor dish 12-4-28 - original genuine parts, tractor packing set(as per model) - original genuine parts, head gasket(as per model) - original genuine parts, piston ring(as per model) - original genuine parts, piston(as per model) - original genuine parts, tractor fan belt(as per model) - original genuine parts, hydraulic pipesmall/large, hydrauli

CTN :45207992

28 May, 2026 4.86 Lacs

Ramgarh - Jharkhand

Tender For repairing of 06 nos. idler shaft, its locking arrangement, trip motor foundation, roof tar felting work along with repair of side platform, railings and lad-der of ekg shovel sl. no. 554.

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

corporations/Associations/Others

CTN :45151624

18 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

Central Government/Public Sector

CTN :45029903

05 May, 2026 NA

Duliajan - Assam

Tender For tar felting works in residential bungalows, quarters and electrical workshop; repair of footpaths, drains, doors and windows of residential bungalows and quarters; replacement of roof sheets of staff guest house; raising of wall height near the main gate; and renovation of toilet of main gate security hut at ps-6, bongaigaon, including supply of all materials except bitumen.

Central Government/Public Sector

CTN :44942282

05 May, 2026 NA

Guwahati - Assam

Tender For tar felting works in residential bungalows, quarters and electrical workshop; repair of footpaths, drains, doors and windows of residential bungalows and quarters; replacement of roof sheets of staff guest house; raising of wall height near the main gate; and renovation of toilet of main gate security hut at ps-6, bongaigaon, including supply of all materials except bitumen.

CTN :44709665

13 Apr, 2026 2.62 Lacs

Bokaro - Jharkhand

Tender For one time tar felting work on the roof and vulcanizing of the temporary joints of the trailing cable (22 nos. joints as and when required) of ekg-5a shovel under monsoon preparation plan of gvp ph ii ocp

Private Sector

CTN :44223299

02 Apr, 2026 NA

Guhagar - Maharashtra

Tender For corrigendum : roof sheeting work of ware house-1 and 2 and repair of turbine building exhaust canopy at rgppl - roof sheeting work of ware house-1 and 2 and repair of turbine building exhaust canopy at rgppl(agency has to quote on both of the boq i.e., boq1 & boq2, failing which offer shall be liable for rejection)

State Government

CTN :44606759

02 Apr, 2026 41.24 Lacs

Bengaluru - Karnataka

Tender For providing basic amenities and various revovation works including constructing of canopy roof for open stage an other allied works in the premises of press club building,cubbon park,bengaluru.(reserved for cat-ii(a))

Tar Felt Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Private Sector

State Government