Latest tea chest Tenders | Government tea chest Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

CTN :40522690

19 Jun, 2025 3.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of flex , shawl , khadak , non stick cookware set 05 liter , electric tawa , water camper 20 liter , water camper 10 liter , water camper 5 liter , full plates , quarter plate , water glass , tea cup , coffee cup , spoon wood , bowl , dustbin packing polyethene , refreshment , lunch , stationery , hiring of civil chef , luggage and transport

CTN :40537574

06 Jun, 2025 4.67 Lacs

Belagavi - Karnataka

Tender For supply of materials for improvements of smashan of survey no 313 in kudremani village - fitter(grade1).,., mason (brick layer) ist class.,., carpenter 2nd class.,., mason (brick layer )2nd class.,., air compressor (1 hour initial + 1 hour final), concrete jiont cutting machine for initial and final cuts,., plate vibrator having 3 ton compaction force.,, screed vibrator .,, needle vibrator.,, super plasticizer admixture is marked as per 9-103, joint sealant,, sealant primer,, seperation membrane of impermeable plastic sheeting 125 micron thick, coarse aggreages 12 mm,.,, plate vibrator having 3 ton compaction force,, mason class i (with tools).,.,, cobble stones of 75mm thick,, crushed stone chippings 13.2 mm.,, granite metal 20 mm.,, granite metal 40 mm.,, crushed stone course aggregate 53.,, vibratory roller 8 tonne,., water tanker,, gravel 2.36 mm/murrum,, water.,., tractor - 40 hp.,, laboratory asst. (sslc passed)/mate/supervisor,, unit cost as per the specification,, enamel metal paint.,, painter class i.,, ready mix primer paint (ready mix red lead paint)., hom of cutting and grinding machine.,, add,, hom of welding and grinding machine.,, welder grade 1., corbon electrodes.,, anchor bolts 750mm.,, base plate/ base plate, gusset plates 6 mm thick., ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at4.5 kg per metre, binding wire,., tmt bars fe 500,., mixer (concrete small used in culvert.), burnt bricks class 35 (non modular).,, casurina poles 100 - 150 mm.,, hom of vibrator 0.71 days.,, plasticizer / super plasticizer.,., casurina poles 75 - 100 mm dia., jungle wood runners and plank.,, silver oak, or equivalent planks 38 mm thick.,, mixer (concrete) - 1 cum capacity.,, portland cement,., coarse sand (zone iii),, broken stone aggregate 12 mm to 10 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 40 mm size

CTN :40267906

03 Jun, 2025 NA

Chamoli - Uttarakhand

Tender For corrigendum : supply of fabrication and supply of complete structure of svl tower 12 mtr including all necessary fittings fixtures alongwith foundation bolt base plate as per ts , portable inverter generator with 5.5 kva rated output and 7 kva , lifting beam alongwith lifting hook for minimum lifting capacity 300kg , toughened glass16mm to protect the camera , ms plate for landing at the top of the tower 10mm thick , galvalume sheet of size 6 ft x 1 mtr , pvc conduit pipe 40mm dia , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 1989 , sand coarse confirming to is-383-9702 as per ts , crushed stone aggregate 20 mm graded , crushed stone aggregate 40 mm graded , crushed stone aggregate 40 to 63 mm graded , mild steel bar of size 10mm dia and above conforming to is 432 , mild steel bar of size 6 to 8mm dia conforming to is 432 , quick setting compound , ms binding wire , wooden planks for shuttering iine class wood of size 3.00 x 0.30 x 0.026m , connected store as per final design

CTN :40506872

18 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - weasher 3 by 8 inch bsf , o ring , nut brush terminal(os sl no-187) , bearing cap bolt(os sl no-7) , spnr de 14x15mm(ces cps260) , bolt self lock 1.5 inch f by whsg , hexagon socket screw (os sl no-142) , stud for silencer connection , set screw for front cover(os sl no-157) , nut cyl head , o ring , dowel pin (os sl no-133) , joint (os sl no-140) , joint (os sl no-111) , nut for air cleaner mtg stud (os sl no-149) , spl screw 5 by 16 bsf , o ring for rocker bracket , stud 5 by 16 inch x 1.25 inch long , joint , bearing bush de , joint for transfer block (os sl no-122) , joint (os sl no- 128) , bolt crankshaft to adaptor , special simmonds nut , spring , stud for injector pipe clamp , locking plate (os sl no-16) , joint (os sl no-103) , shim 0.0003 feet thick (os sl no-131) , shim 0.0005 feet thick(os sl no-132) , gasket(os sl no-188) , hose 9 by 16-0.5mtr , gasket , joint (os sl no-141) , o ring for delivery pipe flange , bolt (ms sl no-117) , joint for air clearance base (os sl no-150) , insulating washer (os sl no-190) , rubber faced washer for cyl head cover (os sl no-1 , stud cyl head to ex manifold (os sl no-151) , valve cap(p-21) , timing pointer (os sl no-58) , bolt fly wheel (p-57) , abutment washer , rubber shroud (os sl no-137) , split pin (os sl no-207) , jublee clip (os sl no-255) , exhaust manifold gasket (os sl no-153) , gasket cover cylinder(chicago260) , joint timing case to back plate , circlip (os sl no-202) , plug (p-37) , joint back plate to crank case , plier insulated 150mm(ces-34) , joint for inlet manifold (os sl no-148) , joint for rear cover (os sl no-163) , o ring (p-11) , o ring (os sl no-121) , joint for front cover (os sl no-159) , locator pos terminal (os sl no-191) , ferrule , connection piece , gasket for discharge pipe , gasket for discharge pipe , grease cap 3 by 8 bsf(chicago) , oil seal (os sl no-129) , insulator washer (os sl no-192) , filer element assy , joint for side cover rh rear (os sl no-162) , brush spring , spring inner , hammer engineer ballpein 0.5 kg , brush(a l page-109) , hose 9 by 16-1.8mtr , bearing bush , o ring (os sl no-96) , felt pad (os sl no-224) , banjo bolt , tab washer , joint crankshaft seal hsg to f by w hsg (os sl no-66) , insulator (os sl no-186) , tee coonection(p-13) , hose 9 by 16-2mtr , brush connector positive , valve spring , valve , l bracket (p-55) , dowel pin(dia14x30)(ces-33) , joint for side cover rear to c by c(os sl no-161) , centre tube (os sl no-155) , bolt , main bearing cap (p-7) , bush assembly , ceramic insert (os sl no-136) , joint (ms sl no-16) , heatsink assy positive , bushing body o pump (p-7) , s assy of pipe feed pump to filter (os sl no-102) , covering plate (os sl no-70) , oil seal , oil seal burton wood(ctlg p-23) , oil relief valve(ms sl no-03) , anti vibration mount(p-25) , set screw (os sl no-50) , oil filter cap (os sl no-167) , s assy of pipe feed pump to filter (os sl no-104) , tee connection(p-13) , s a of pipe filter to fuel pump(os sl no-105) , spring (pinion)(os sl no-212) , fan belt (oem) , auxiliary diode , insulator (os sl no-195) , kit thrust washer(os sl no-4) , plug(p-29) , water pump seal (os sl no-135) , o ring (p-29) , lead assy y positive (os sl no-189) , o ring(p-3) , s a of pipe oil , c e bearing (os sl no-231) , regulator , flexible hose(p-29) , roller bearing hofman (os sl no-83) , ball bearing hoffman (os sl no-84) , o ring(p-3) , front cover (os sl no-156) , taper roller bearing (os sl no-130) , heat sink assy aux (os sl no-197) , driving shaft (os sl no-134) , joint housing to back plate(ms sl no-67) , bush assembling kit(p-61) , element filter , filter service indicator(chicago p-20) , liner cyl s by s outer dia y (p-7) , de bearing , p2p controller service kit(os em r655 dt 01.02.19) , bearing sre , hose filter to fuel pump , rotor assy(a l page-99) , ring set(p-15) , cable(p-11) , kit main bearing(chicago) , oil by pass valve , s a of fan 19.5 in dia 6 blade (os sl no-125) , thermo

CTN :40508498

17 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of complete structure and construction material of cp - cement in polythene bags 50 kgs each 43 opc , sand coarse , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , rr stone boulders , tmt steel bar 8 mm dia , tmt steel bar 10 mm di , tmt steel bar 12 mm dia , tmt steel bar 16 mm dia , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric , 75mm dia pvc pipe for weep hole , scantling 3 x 3 inch seasoned first class hard wood 2 point 30 mtr long , shuttering plywood of size 8 x 4 feet and 12mm thickness , binding wire 20 gauge zero point 9mm annealed , nails 2 inch for shuttering , nails 3 inch for shuttering , nails 4 inch for shuttering , water proofing compound , quick setting compound , ms door pre fabricated , loophole of size 600 mm x 500 mm , bitumen vg 10 , 10mm thick ms plate as in one layer on roof , 20mm thick ms plate as in two layers on roof , shredded rubber 150 mm , lime , primer for synthetic paint , synthetic enamel paint light brown shade , synthetic enamel paint medium brown shade , synthetic enamel paint dark brown shade , paint brush , lighting conductor complete set , cut off machine 14 inch , tile cutter make bosch for ply cutting , working goggle 1 as per sample , ppgi sheet zero point 60 mm thick of size 10 x 03 feet , durmut 5 kg with 5 feet wooden handle , concrete vibration machine petrol needle , hand gloves rubber best quality , pan motor tasala 18 dia made of steel , phawrah with handle midium size , shovel with handle , measuring tape 5 mtr rectractable grade a1 16 , measuring tape 10 mtr rectractable grade a1 16 , wiremess for seiving sand 1 mtr width 15 mtr roll , axes picks 3 kg head with handle , crow bar hexagonal 1200mm long x 40mm dia , gum boot various size , spirit level 10 inch long , nylon mason thread 100m long , mild steel single hand double wheel barrow to carry upto wheel barrow 200 kg weight , rock drill machine bit 48mm thick , rock drill machine bit 32mm thick , plumbob steel with lasing , water level pipe for mason work transparents , hammer 10 kg with handle , tmt bar bending frame , tmt bar bending handle , wooden gurmala of size 8 x 4 inch , aluminium study of size 3 x 2 inch and 6 feet long , steel gurmala of size 8 x 4 inch , hdpe tirpal of size 30 x 30 feet , steel bucket 15 ltr , iron cutter blade 14 feet , iron cutter blade 4 feet , hexa blade double side , portable hydraulic concrete mixer machine conforming to is 12119 to 1987 to provide an uniform mix for a reliable operation

State Government

CTN :40507972

12 Jun, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of wood carving designated board double side , wood carving name plate , name plate stickered front through studs acrylic name plate 45.72x20.32( double side) , unbranded printed vinyle on sun board information board or illustration board (designation board) do

CTN :40508238

18 Jun, 2025 NA

Kamrup - Assam

Tender For supply of construction material for bty comd post 8.06m x 6.02m x 3.40m as per technical specification and drawings attached , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make pidilite or dr.fixit or fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5-2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw camouflage pattern , ismb hot rolled ms 200 x 100 3m maketata or sail or jsw , ismb hot rolled ms 200 x 100 4m make tata or sail or jsw , polythene sheet colour less and weight of sheet shall be not less than 70gm per sqm , pbs roll 20m long width of 0.9mtr isi marked with min weight of 34 kgs per roll , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm , shuttering and nails wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , lightning conductor air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make - presto or polycab or finolex , charcoal , slt , double sleeping bunk complete with plywood matress and all connected accessories all as per technical specification. , study chair of size length 56cm height 82 cm width 56 cm lacqured finish with arm seat and back cushion velvet holestry make supreme or equivalent , study table of size 4x2 wooden top on round tube structture with three drawers unit , steel bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec. , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts per hour , plastic dustbin of capacity 40 ltrs make neelkamal or cello or supreme. , solar system comprising of 1 x 500 watt monocrystaline pv panel 100ah solar bty min 550va ac or dc inverter with inbuilt mppt and charge controller equivalent , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs

Central Government/Public Sector

CTN :40273829

02 Jun, 2025 18.00 Lacs

Ezhimala - Kerala

Tender For corrigendum : procurement of furniture for swimming pool, gymnasium, sport facilities and cafeteria as part of infrastructure augmentation at ina, ezhimala nap phase-ii - schedule a part-i(wooden furniture), hat stand with mirror (drawing no. fd-233), notice board 1200mmx900mm(fd-01m), teapoy (drawing no. fd-278), amirh mess utencil (drawing no. fd-93)., drain board and plate rack ( drawing no. fd-48(m))., table pantry ( drawing no. fd-295)., table serving 6 x 3 ( drawing no. wd/ezh/01)., news paper stand ( drawing no. pma(k)/gp-6/08)., mirror full size with teak wood frame (drawing no. pma(k)/gp1/hw/10)., peg set of 3 ( drawing no. fd-80(m)), key board ( drawing no. fd-101m)., sub total of schedule a part-i (wooden furniture), schedule a part-ii( steel furniture), stool revolving adjustable steel ( drawing no. fd-1026)., almirah steel medium ( drawing no.pma(k)/ gp1/steel/02)., almirah large steel with shelves (drawing no. fd-1031), complaint box (drawing no. fd-105m), desk stand lecture (drawing no. fd-1022), trolly hot food electrical (drawing no. fd-133), receptacle pvc (dust bin) (drawing no.fd/e6/map/13/oma), recoreded metal filing cabinet 4 drawers (drawing no. fd-397), table office clerk steel (drawing no. fd-84), ladder aluminium (drawing no. fd-1025), rack steel adjustable with shelves (drawing no. fd-106m), rack side with tray 3 space (drawing no. fd-1023), self supporting extension ladder aluminium (drawing no. fd-115), sub total of schedule a part-ii (steel furniture)

State Government

CTN :40501962

04 Jun, 2025 1.14 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of various items to drivers room and allied works at direction office, circle office and divisional office of m and hed kashmir - providing and fitting of water purifier with purifier purification stages:ro+uv+min+copper purification cartriges : 1. super sediment filter 2. carbon block filter 3. anti-scalant cartridge 4. ro membrane 5. mineral cartridge 6. copper cartridge 7. in tank uv sterilization storage tank capacity: 7 l ro membrane : 75 gpd (gallons per day) production rate : upto 15l/hr max duty cycle : upto 75 litres/day ultra violet led : 0.7 watt input voltage : 140-300 v ac / 50 hz operating voltage : 24 v dc works on tds upto : 2000 ppm, providing and fitting of graphic matting of size 14.5x 12.5, providing and fitting of floor blankets of size 14.5x 12.5, providing and fitting of shoe rack of standard size, providing and fitting of exhaust fan/ventilation fan 150mm sweep 1400 rpm , 270 cmh air delivery, 28 watt, providing, fitting of 20-watt surface led light, providing of cup set of six pieces, providing of ss rice plates, providing of ss water glass, providing of uniform for drivers, dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: 15.10.2 in cement mortar, providing and fixing brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand). (jksor code-6.1.5), providing and fixing of pink marble slab plain 18 mm thick(6007a), providing and fixing 15 mm nominal bore of standard back type c.p. brass sink mixer of approved quality and make, weighing not less than 1.970 kg., providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c waste fittings complete: 18.28.1.2 40 mm dia, providing and fixing of stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm, providing and laying of cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 11.3.2 40mm thick with 20 mm nominal size stone aggregate., direction office/circle office / ao office, vitrified floor tiles providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.1 size of tile 500x500 mm, providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws.(jk sor 9.10.5) second class kail wood 35mm window size i)49"x18"- 04 no., painting wood work with deluxe multi surface paint of required shade. two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture for windows (jksor 13.57.2), renewing glass panes, with wooden fillets wherever necessary :14.7.1 float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) 43"x13"- 02 no., providing and fitting of anodised aluminium tower bolt (barrel type) 100 x10 mm(jk sor 0702), providing and fitting of anodised aluminium handles 100 mm with plate 150x32 mm (jk sor 0704), providing and fixing bright finished steel hooks and eyes for windows, renewing double glazing glass panes argon filled for upvc windows , 20mm overall thickness along with rubber seal, servicing of upvc windows/doors which include servicing/repairs of friction stays, handles etc

Tea Chest Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

Central Government/Public Sector

State Government