Latest teak ply Tenders | Government teak ply Tenders

State Government

CTN :45721001

08 Jul, 2026 4.75 Lacs

Jaipur - Rajasthan

Tender For supply of ceiling materials and other works at lok bhawan jaipur - providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item.)with float glass panes of 8 mm thickness, providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled and glazed shutter 25 mm to 40 mm thick : is 710- 1976 marked 12mm thick teak ply bwr both side, providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade : ivory coast wood grade i, providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. with brass cover plate

CTN :45738908

15 Jul, 2026 NA

Usmanabad - Maharashtra

Tender For executive's table @ 1800lx900dx750ht , executive's table @ 1800lx900dx750ht 1st floor , executive table with credenza , executive table with credenza 1st floor , medium height partition , medium height partition 1st floor , conference table , low height openable storage , low height openable storage 1st floor , full height steel storage , full height steel storage 1st floor , book case with glass shutter , book case with glass shutter 1st floor , public seating chair 3 seater , public seating chair 3 seater 1st floor , stool for lab & class iv , aluminium foldable ladder , sofa set 3+ 1+ 1 , tea table , double faced mobile unit for compactor , 12 seater reading table , curvilinear workstation , high back chair , high back chair 1st floor , mid back chair , mid back chair 1st floor , decorative teak plywood veneer lining , decorative teak plywood veneer lining 1st floor , veneer finish wall paneling , teak veneer partition , teak veneer partition 1st floor , 19mm plywood , 12mm plywood , veneer , m. s. screws , aluminium handle , carpenter class i skilled

State Government

CTN :45699630

08 Jul, 2026 4.75 Lacs

Jaipur - Rajasthan

Tender For supply of ceiling materials and other works at lok bhawan, jaipur. - providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item.)with float glass panes of 8 mm thickness , providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled and glazed shutter 25 mm to 40 mm thick is 710-1976 marked 12mm thick teak ply bwr both side , providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade: ivory coast wood grade i , providing and fixing double action hydraulic floor spring of approved brand and manufacture is: 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with ibrass pivot and single piece m.s. with brass cover plate , supply of wool jute kilim rugs blend natured fibers with timeless hand-weaving traditions crafted by skilled artisans, each rug carries earthy charm & durability. hand woven from rich wool and strong juke, these killim rugs bring texture, strength and artistic character to any space. every piece is made slowly and thickness 5 to 6 mm. size:-8'x10' size:-2'x24' size:-2'x20'

CTN :45672300

04 Jul, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of wooden 3x5x13 fatta , 1.5x10x16.5 wooden fatta , plywood 19mm 4x8 , plywood 18mm 4x8 , plywood 4x8 brown teak ply , plywood 6mm 4x8 , ply board 12 mm 8x4 , wooden scating , ply 16mm

Central Government/Public Sector

CTN :45637836

25 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot miscellaneous scrap - 98414501 various e-waste items such as different types & makes of computers & its accessories/ peripherals, laptop, monitors, ups, mps, speakers, printers, cpu, hard disc, key board, mouse, toners, cartridges, scanners, projectors, terminals, servers, electronic led cards, pcb card, cpu card, driver card, indicator card, xerox machine, fax machine, ribbons, thin client, fire wall, routers, plotter, lan extender, body warn camera, spike guard, typewriter, calculators,cd/dvd drive, remote, static mux and other computer related items scrap, display board, released off sorts & sizes, broken and damaged. un serviceable to railway use. loading by purchaser. note: bidders are advised to see the lot physically. (note: cpcb mpcb,pcc license to be produced at the time of delivery).note: loose plastic parts released from these items is part of lot to be lifted during delivery

State Government

CTN :45606470

29 Jun, 2026 25.28 Lacs

Barnala - Punjab

Tender For annual rate of contract supply of hardware material for annual repair and maintenance for f/y 2026-27 supply of oxidised mild steel hasp and staples (safety type) 115 mm of approved quality., supply of oxidised mild steel screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 30 mm, d. 35 mm, e. 50 mm, f. 60 mm, g. 75 mm, supply of ss screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 32 mm, supply of black screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, supply of chipboard screws (pkt. of 200 nos.) (patta, omni make or equivalent), a. 3.5 x 20 mm , b. 3.5 x 25 mm, c. 3.5 x 32 mm, d. 3.5 x 38 mm, e. 3.5 x 50 mm, f. 3.5 x 60 mm, g. 3.5 x 75 mm, supply of oxidised mild steel sliding door bolt of approved quality. , a. 250 x16 mm, b. 300 x16 mm , supply of oxidised mild steel handles of approved quality., a. 100 mm, b. 125 mm, supply of anodised aluminium tower bolt (barrel type) of approved quality., a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, d. 250x10 mm, e. 300x10 mm, supply of aluminum sliding door bolt of approved quality., a. 250 x16 mm, b. 300 x16 mm, supply of oxidised mild steel tower bolt (barrel type), a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, supply of anodised aluminum handles of approved quality., a. 75 mm, b. 100 mm, c. 125 mm , d. 150 mm, supply of plywood water proof (make green, duro, century, archidply, modiply & evergreen), a. 06 mm, b. 09 mm, c. 12 mm , d. 18 mm/19 mm, supply of marandi/red champ cut to size including grooving & finishing all respect (well seasoned), supply of second class teak wood cut to size including grooving & finishing all respect (well seasoned), supply of teak plywood (make internet maxima & sanik, green, national or equivalent), a. 04 mm, b. 06 mm, c. 12 mm , supply of marandi wood beading finishing all respect (well seasoned), a. 1/2" x 3/4" , b. 1.1/2" x 1/2", supply of sunmica sheet (8' x 4') as per sample or approved quality. (make green, duro, century, archidply, modiply & evergreen), a. 0.8 mm, b. 01 mm, supply of masking tape , supplying of panelled shutter for doors including isi marked black enamelled m.s. butt hinges with necessary screw, including panelling of 12 mm thick water proof ply. kiln seasoned and chemically treated hollock wood. 30 mm thick shutter. , supply of block board construction flush door with teak wood ply on both faces 30 mm thick of approved quality., supply of wire gauge shutters using galvanized m.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 35mm thick shutters kilin seasoned and chemically treated hollock wood , supply of pvc door shutter as per is , specification of sintax, rajshiri or make or equivalent, supply of wood primer (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of water based exterior primer (nerolac, asian, burger, dulux or equivalent ), supply of red oxide primer (nerolac, asian, burger, dulux or equivalent), supply of synthetic enamel paint (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of terracotta paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of acrylic smooth exterior paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of plastic emulsion paint (nerolac, dulux, asian, burger, dulux or equivalent make), supply of touch wood polish (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of turpentine oil of approved quality., supply of spirit of approved quality., supply of colure tube (100mm), supply of paint roller (size 10”), supply of thinner, supply of silicone, supply of siller, supply of putting patti of approved quality., supply of malmal/mulmul cloth of approved quality., supply of lime (as per approved sample), supply of indigo (neel) (as per app

CTN :45587156

27 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of teak plywood 8 ft by 4 ft 6 mm , beading 1.5 inches , casing capping , 15 amp switch board with plug , 5 amp switch board with plug , floor matting , printed galvanized sheet 6 ft by 2.5 ft

CTN :45498341

20 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of cgi sheet 10 ft by 3 ft 0.40 mm , teak plywood 8 ft by 4 ft 6 mm , nails , wooden panelling 10 ft , touchwood nerolac , pvc pipe 4 inches 110 mm , pvc l bend 4 inches 110 mm , corner beading 198.3 ft , floor matting

CTN :45469319

16 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of teak ply wood 8 ft by 4 ft 6mm , beading 1.5 inches , casing capping , 15 amp switch board with plug , 5 amp switch board with plug , floor matting , printed galvanized sheet 6 ft by 2.5 ft

CTN :45433250

15 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of teak plywood 8 ft by 4 ft 6mm , beading 1.5 inches , casing capping , 15 amp switch board with plug , 5 amp switch board with plug , floor matting , printed galvanised sheet 6 ft by 2.5 ft

Teak Ply Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government