Latest technical inspection service Tenders | Government technical inspection service Tenders

Central Government/Public Sector

CTN :45120485

29 May, 2026 NA

Chennai - Tamil Nadu

Tender For shell kit for memu ndmc jk 962 a. roof assembly 96216001 000 01 alt "a" - 1no location of sidewall 96214001 000 01 alt "nil" - 1 no end construction pail end 94515001 000 01 alt "nil" - 1no end construction shunting desk side 96215001 000 01 alt "nil" - 1 no firm shall fulfill the manufacturingfacility as per icf/md/specn-200, issue status 01, rev 04 with amendment no 01. firm shall fulfill the manufacturing facility as per icf/md/specn-315,issue status 01, rev.00 with amendment no 01. b.supply of one coach set of bodyshell items and partition frames for memu ndmc jk 962 to drawing nos 1. 96210002 000 01 alt "a" - 1no 2. 96210007 000 01 alt "b"' - 1 no 3. 96210026 000 01 alt "nil"- 1 no 4. 96210046 000 01 alt "nil"- 1 no 5. 96210064 000 01 alt "nil"- 1 no 6. 94410054 000 01 alt "nil"- 2 nos 7. 94410076 000 01 alt "nil"- 1 no 8. 94410072 000 01 alt "nil"- 1 no c. under frame arrangement 96211001 000 01 alt 'b' - 1no firm shall fulfill the manufacturing facility as per icf/md/spec-147,issue status 01 rev.02 with amendment no.02. special condition : packing as per icf/j&t/misc-2201, alt 'e'. packing as per icf/j&t/sk-1809, alt 'a'. packing condition as per drg.no.icf/j&t/misc-2487, alt 'b' the underframeshould be supplied as normal side up & side bearer side down. packing conditionas per icf/j&t/sk-1865, alt 'a'. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion [safety item ]

Central Government/Public Sector

CTN :45121169

18 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of one coach set of underframe details (cross member assy, stiffeners etc) for train set mc,ndtc and tc coaches to drg nos. 1) 72711024, alt. "b" - 2 nos, 2) 72711025, alt. "b" - 2 nos, 3) 72711026, alt 'c '- 2 nos, 4) 72711027, alt 'c' - 2 nos, 5) 72711028 - 2 nos, 6) 72711029 - 2 nos, 7) 72711015, alt 'a'- 12 nos, 8) 72711016, alt 'a'- 12 nos, 9) 72711030 - 2 nos, 10) 72711031 - 2 nos, 11) 72711033, alt 'a' - 2 nos. 12) 72711034, alt 'a' - 2 nos. 13) 72711037 - 2 nos, 14) 72711038 - 2 nos, 15) 72711039, alt 'a' - 2 nos, 16) 72711040, alt 'a' - 2 nos, 17) 72711041, alt 'a' - 2 nos, 18) 72711042 - 2 nos, 19) 72711077 - 4 nos, 20) 72711078 - 4 nos, 21) aae11764 - 4 nos, 22) aae11192 - 4 nos, 23) aae11102 - 2 nos, 24) aad11946 - 4 nos, 25) aad11945 - 4 nos, 26) aad11944, alt-'a' 4 nos, 27) aad11955, alt 'a' - 2 nos, 28) aad11526, alt 'b' - 20 nos, 29) 72711035, alt 'a' - 2 nos, 30) 72711036, alt 'a' - 2 nos, 31) aad11701 alt 'b' - 2 nos, 32) aae11101 alt 'a' - 4 nos, 33) aad11951, alt-'b' - 2 nos, 34) aad11950, alt-'b' - 2 nos, 35) aad11964 - 4 nos, special condition : finished components except ss components shall be thoroughly cleaned and latest to a dft of minimum 60 microns and mdts-094, rev-01 with amnd-01 or (latest) shall be applied with epoxy zinc phosphate primer as per rdso/spec no.m&c/pcn/100 followed. for procedure and colour shade excluding the areas as specified in detail drawings. all the items are to be supplied as coach set only. suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [ warranty period: 30 months after the date of delivery ]

CTN :45129388

15 May, 2026 4.57 Lacs

Lucknow - Uttar Pradesh

Tender For construction of lecture hall complex including iei, fans, fire alarm, pa system, wet riser, sprinkler system, vrv/vrf/split ac system, online ups system, audio visual system, dg sets and lifts etc. at bbau, lucknow. (providing services for driver and peon/dak runner and hiring of inspection vehicle under sub division-iii, cpwd, lucknow)subwork/packages:hiring of inspection vehicle

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

Central Government / Public Sector

CTN :44802281

11 May, 2026 NA

Guwahati - Assam

Tender For corrigendum : providing of custom bid for services - laser scanning and remote visual inspection of two coke drums at guwahati refinery, tender no 9010c26a38

Central Government/Public Sector

CTN :45033163

28 Apr, 2026 NA

Mumbai - Maharashtra

Tender For visual inspection, condition assessment, and carrying out required â€˜non-destructive testsâ€™ (ndt) for structural condition assessment of rbi residential buildings at tapovan malad (e) and dahisar (w) in mumbai

Central Government/Public Sector

CTN :45066336

05 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of head stock cpl for lhb under frame (ls,lwscn,lwscz,lwaccw,lwaccn) to drg. no. 49512001, alt "g", col.i. the firm shall fulfill the requirement as per icf/md/spec-147, issue status-01, rev-02 with amendment no.02. special condition : packing drg similar toicf/j&t/sk-1706, alt 'a' be followed. i) special care to be taken for under slung items while transit. ii) for painting system follow the drg no 53811116, alt 'e' iv) details for stage inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. [safety item ]

Central Government/Public Sector

CTN :45056657

02 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of under frame arrgt for emu c to drg no.(573)icf/mrvc/c/bt-1-1-001, alt 'k' col 2. firm shall fulfil the manufacturing facility as per icf/md/spec-147, issue status-01 rev.02 with amendment no.02. special condition : the underframe should be supplied as normal side up and side bearer side down. packing condition as per drg no. icf/j&t/misc-2487, alt 'b' stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion. [safety item ]

Central Government/Public Sector

CTN :44998364

15 May, 2026 NA

Chennai - Tamil Nadu

Tender For supply of underframe complete for lwlrrm amrit bharat coaches to drg. no.lp11103,alt d, anx 9 without item 30 to drg. no.1.11012.0.03.095.001 with additional brackets to drg no 53811115, alt 'a'. the manufacturing facility as per icf/md/spec-147, issue status-01, rev-02 with amendment no.'02'. special condition : the underframe should be supplied as normal side up and side bearer side down. packing condition as per drg no. icf/j&t/misc-2487, alt 'b'. stage inspection details. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of front part with sole bar. # assembly of modular frame arrangement. # weld parameters to be checked & recorded (c) trestle stage # marking, drilling & tapping of holes wherever necessary. # marking & placing of detail items. # complete welding wherever necessary. # weld parameters to be checked & recorded # assembly & welding of trough sheets. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (d) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # visual inspection. # final product inspection. note: application of aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrossion.[safety item ]

CTN :44965687

12 May, 2026 NA

Multi City - Multi State

Tender For visual fiber inspection system

Technical Inspection Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors