Latest technical tools Tenders | Government technical tools Tenders

CTN :45527138

22 Jun, 2026 NA

Thane - Maharashtra

Tender For mitutoyo gear tooth anvil micrometer 25-50 mm, lc 0.001mm, cat no. 324-252-30(qty: 01 no. ) along with , mitutoyo make digital outside micrometer with data output 0-25mm, lc 0.001mm, cat no. 293-230-30 (qt , mitutoyo make digital outside micrometer with data output 25-50 mm, lc 0.001mm, cat no. 293-231- 30(q , mitutoyo make digital outside micrometer with data output 50-75 mm, lc 0.001mm, cat no. 293- 232-30(q , mitutoyo make digital vernier caliper 0- 300mm least count: 0.01mm(qty: 01 no) , cat no. 500- 173-30 al , mitutoyo make digital vernier caliper 0- 600mm least count: 0.01mm(qty: 01 no) , cat no. 500- 501/506-1 , mitutoyo make usb it pa version 3.0, cat no. 06agr54

Central Government/Public Sector

CTN :45474259

13 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply, fitment and testing of spares for torque multiplier, range 580nm to 2000nm, make : gedore, model no: dvi20l consist of following: anvil 1 inch -01 set. [ warranty period: 30 months after the date of delivery ] ]

CTN :45550312

22 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - ms scrap consists of cond old and discarded unserviceeable tools spanner pipe wrenches hammers off sizes ghan grease gun sprey cutting tools bits drill check ring screw drivers cutter pliers single edge saw (arra) hand drill machine bench vice chain kuppy hex frame blade crow bar level sprit tools power wrenches ball punch tip bicycle pump track measuring tool taping rod guage carbide tools grinding tools all type weight beam scale spray machine and track jack and other similar tools with or without nf and scrap jack anvil and anvil stant off sizes bench vice files and other various cond tools unfit for railway use lying in godown no. 16. [gst 18% hsn 72044900]

CTN :45315777

22 Jun, 2026 5.00 Crore

Bikaner - Rajasthan

Tender For corrigendum : supply of different items for treatment of patients in different departments under m-aay, cm-nnry and rghs. rate contract for 2 years- sterile hypodermic syringe with needle attached, 24 g, single use-2ml, sterile disposable perfusion set (infusion set) with airway and needle (paediatric use) , surgical spirit ip(500ml), surgical spirit ip(100ml), umbilical cord clamp, paper adhesive plaster 3inch 9.0 mts (with cutter) non woven, non allergic and strong adhesive but gentle to skin should conform to the standards and test as per is and bp standard, absorbable surgical (synthetic) antibacterial with sterilised needled suture (braided coated polyglaction/polyglycolic acid violet) size 2/0% circle round bodied 30 mm suture length 90mm, absorbable surgical (synthetic) antibacterial with sterilised needled suture (braided coated polyglaction/polygiycolic acid violet)size 3/02 circle round bodied 20mm suture length 70mm, polypropylene nonabsorable synthetic surgical mesh 7.6 cm 15 cm or 7.5cm*15 cm, polypropylene nonabsorable synthetic surgical mesh 15 cm 15 cm, paper adhesive plaster 2inch 9.0 mts (with cutter) non woven, non allergic and strong adhesive but gentle to skin should conform to the standards and test as per is and bp standard, rubber examination gloves size medium, endotracheal tube cuff size:-8, endotracheal tube cuff size 8.5, pop bandage 6", pop bandage 4", gloves size 6 inch, powder free (disposable sterile surgical rubber gloves), gloves size 6.5 inch, powder free (disposable sterile surgical rubber gloves), gloves size 7 inch, powder free (disposable sterile surgical rubber gloves), gloves size 7.5 inch, powder free (disposable sterile surgical rubber gloves), gloves size 6 inch, powdered (disposable sterile surgical rubber gloves), gloves size 6.5inch, powdered (disposable sterile surgical rubber gloves), gloves size 7 inch, powdered (disposable sterile surgical rubber gloves), gloves size 7.5 inch, powdered (disposable sterile surgical rubber gloves), abdominal drain kit, sterile having drainage catheter and collection bag (2000ml) (size 32), 3way stop cock with extension tube (vein-o extension line)size 150cm(non pyrogenic & single use), feeding tube no. 14, feding tube no. 12,, ligating clip 300 (for laproscopic use), polydiaxanone 2-0 rb, polydiaxanone 3-0 rb, polyurethin gestroduodenal tub, radio opac with guide wire and fixation tape, silk reel 3-0, skin stapler, transpore 3", absorbable surgical suture, braided coated polyglactin 910 violet) size 3/0 % circle round bodied 30 mm suture length 70cm, absorbable surgical suture, braided coated polyglactin 910 violet) size 3/0 3/8 curved rc 26 mm suture length 70cm, shoulder immobilizer, pelvic binder size-s, pelvic binder size-m, pelvic binder size-l, pelvic binder size-xl, pelvic binder size-xxl, ankle binder size- s, ankle binder size- m, ankle binder size-l, feracrylum 1% w/v, feracrylum 3% cotton gauge impreganated, feracrylum 3% w/w centburibine hcl 0.5 %, abdominal drain kit no. sterile having drainage catheter and collecting bag (2000ml) (size-20), iv infusion set with luerlock & y side, male to male connector, mold (position and fixsation device), iv infusion set with airvent (20 drop/ml), pvc suction tubing, 12.5mm, transparent film dressing, transducer dom with flusing device, vaccume suction drain 18, powered intra-luminal staplers with curved shaft anvil detachable 29 mm, 3 row staple line with adjustable staple height (1.0-2.5mm), longer staple leg 5.5mm-non slip grip surface, bone cement 20 gm with disposable sterile cement gun/syringe kit with low/high viscosity, passport cannula silicon 6, passport cannula silicon 8, radiofrequency probe compatible with mitech system (disposable), shaver burr various diametres compatible with mitech system (disposable), shaver burr various diametres compatible with storez (disposable), shaver burr various diametres compatible with striker (disposable), suture lasso l/r suture passer, radia

CTN :41043768

12 Jun, 2026 NA

Delhi - Delhi

Tender For bid to ras bid to ras corrigendum : supply of oncology surg - disposable conventional trocar with universal seal , dvt cutt sleeves all size , egia60amt endo gia articulating reload with tri , harmonic focus 9 for open surgery compatable , harmonic focus 17 for open surgery , histoacryl flexible tissue adhesive glue with , new linear cutter 55 with 6 rows , new linear cutter 75 with 6 rows slectable , optical laparoscopic trocar 10 11 mm , optical laparoscopic trocar 12 mm 100 mm , optical laparoscopic trocar 5 mm x 100 mm , patient transfer and or table super , removac size 16 , specimen container plastic 2 litre with , spring loaded disposable core biopsy , sterile skin marking pen water resistant , under water seal drainage double , ambu a scope 4 broncho regular 5 0 2 2 , breast prosthesis external silicone tear , breast prosthesis external silicone tear drop s , 4 ply surgical mask with anti fogging band , liquid 500 ml enteral nutrition with , instrument cleaner 12 5 amphoteric , instrument rust remover 15 30 inorganic , instrument lubricant spray 5 non ionic , instrument lubricant spray 5 non , 1000 ml canister compatible with , 1000 ml canister compatible with existing , vac canister 500ml with aqua , vac canister 500ml with aqua gell , transoral anvil 25 mm diameter compatible , disposable single handed scalpel blade remover , disposable suction container 1500cc with , disposable suction container 3000cc , chemoport size 8 9 6f with groshong tip , breast drape sheet set sterile impervious , breast drape sheet set sterile impervious containing , b ve abdominal drainage kit 2000ml collection , b ve abdominal drainage kit 2000ml , hem o lock purple non absorbable polymer

CTN :45486249

22 Jun, 2026 40.75 Lacs

Kurukshetra - Haryana

Tender For purchase of lab equipment item for material testing laboratory as per nabl norms. - electronic balance 200 gm, accuracy 0.001 gm, standard weight box (stainless steel) 1 mg to 200 gm, variable flow type air permeability apparatus (blaine type)variable flow type air permeability apparatus (blaine type), whatman filter paper 40 (pkt. of 100 pcs), digital thermo hygrometer, mercury, stop watch digital 1/10 sec, electronic balance 1 kg capacity, graduated cylinder, length comparator, shrinkage bar mould (single), humidity chamber (heating), cement autoclave, le-chatelier water bath, steel scale 300 mm, le-chatelier mould, vicat apparatus with dashpot, vicat mould, electronic balance 6 kg 0.5gm readability., poking rod for cement, cube mould (70.6 mm), standard sand grade-i (25 kg bag), standard sand grade-ii (25 kg bag), standard sand grade-iii (25 kg bag), vibrating machine, automatic compression testing machine 500 kn, accelerated curing tank , gauging trowel, electronic balance 15 kg, cube mould (150 mm), automatic compression testing machine 2000 kn, vernier caliper digital 300 mm, measuring scale 300 mm, hot air oven 450 x 450x 450mm., water bath (28 ltr), electronic balance 10 kg capacity 1gm readability., concrete test hammer 10-100 proceq, anvil for concrete test hammer., ultrasonic pulse velocity apparatus, half cell potentiometer (rebar corrosion detector)

CTN :45488935

30 Jun, 2026 41.38 Lacs

Murshidabad - West Bengal

Tender For procurement of esp spares for unit 4 esp overhauling during under ahp-em,stage ii during 2026,sgtpp - procurement of esp spares for unit 4 esp overhauling during under ahp em ,stage ii during 2026,sgtpp, ci bearing,collecting rapping ( plain bearing (ci) for crm & erm system,mat-is-210 gr-20 with 02 nos bolt, id-51 mm and 50 mm thickness. ), ci bearing for erm vertical shaft for esp dia-40mm. ( bush along with outer assembly. ), set ring for bush bearing for esp for 500mw esp, thrust bearing of em vertical rapping shaft ( mat-en-8. ), bottom bearing # of em rapping vertical shaft, major pin wheel big ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), minor pin wheel small ( mat- pin en-8 with hardness -300-350 bhn, body-is-2062(assly). ), heating element for esp hopper for esp for 500mw esp. ( 440vac,for 500mw bhel esp, rating-500w. ), heating element for shaft insulator for esp for 500mw esp. ( for 500mw bhel esp, rating -1.0kw,type- breathing type tubular, 415v. ), heating element for support insulator for esp for 500mw esp., shaft insulator for esp for esp for 500mw esp. ( suitable for 500mw esp,make-m/s. bhel. ), support insulator, type-cylindrical for esp for 500mw esp ( od: 435 + 10 mm; id: 379 + 10 mm; height: 375 + 5 mm,for 500 mw bhel make esp. ), anvil for shock bar assembly #, inner arm for rapping hammer for esp moc-en 8 ( inner arm(ms) for rapping hammer suitable for m/s. bhel make esp ,2x500mw. ), emitting electrode for 500mw esp for esp model faa-9x45m-2x100150-2, hammer assembly,em rapping system # ( outer arm/hammer for eerm of 500 mw bhel make esp ), hammer assembly,col rapping system # ( outer arm/hammer for cerm of 500 mw bhel make esp ), pin insulator for disconnecting switch for esp c.no-71-999, crm horizontal shaft, dia-50mm for esp shaft 1-3 length -4250mmrnshaft 2-3 length -4650mmrnshaft 3-3 length -4790mm ( moc- en8, 400 mm pitch, as per drg. no: 2-79-725-04299 of 500mw bhel unit. section: 02,03 & 04. sleeve tube to be given seperate 04 nos. per set. ), shaft,end,d50xl940mm,en8 w/key&key slot for esp cerm shaft as per bhel drg no: 2-79-725-04299 ( moc: en8 ), shaft,eerm shaft,vertical,dia-40mm for esp 9900mm long,with sleeve,moc-en8 or080m40-bs970 or equivalent ( for 500 mw bhel make esp ), shaft,eerm shaft,horizontal,dia-50mm for esp 9270mm long,with sleeve and set rings,moc-en8 or080m40-bs970 or equivalent ( 03 parts(part-i with key,part-ii & part-iii) with 02 number set ring,02 number sleeve.bhel drawing no.-2-79-716-03812. ), gdrm d-50 shaft moc-en-8 with 19 holes for 500 mw esp serial no-faa-9x45m-2x100150-2 , 3 parts shaft with 19 holes.shaft with sleeve and set rings., big hammer for cerm shaft for 500 mw esp serial no-faa-9x45m-2x100150-2 drg no:2-79-725-04299

Central Government And Public Sector

CTN :45252556

19 Jun, 2026 NA

Kudankulam - Tamil Nadu

Tender For corrigendum : supply of interchangeable anvil - lc 0.01 mm - as per annexure c - range 700-800 mm , supply and delivery of analog outside micrometer with interchangeable anvil - lc 0.01 mm - as per annexure c - range 800-900 mm , supply and delivery of analog outside micrometer with interchangeable anvil - lc 0.01 mm - as per annexure c - range 900-1000 mm , supply and delivery of analog groove micrometer - with inside and outside measurement - as per annexure d - range 0-25 mm , supply and delivery of analog groove micrometer - with inside and outside measurement - as per annexure d - range 25-50 mm , supply and delivery of telescopic gauge set with 6 number of gauges - as per annexure e - range 8-150 mm , supply and delivery of micrometer stand - as per annexure f - adjustable - range upto 100 mm , supply and delivery of micrometer stand - as per annexure f - fixed - range upto 50 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-300 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-500 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-750 mm , supply and delivery of - analog long jaw caliper with fine adjustment as per annexure g - range 0-1000 mm , supply and delivery of - analog offset type caliper as per annexure h - range 0-200 mm , supply and delivery of - digital back jaw edge to centre type caliper as per annexure i - range 10.1 to 200 mm , supply and delivery of - digital back jaw edge to centre type caliper as per annexure i - range 10.1 to 300 mm , supply and delivery of - digital back jaw centre to centre type caliper as per annexure j - range 10.1 to 200 mm , supply and delivery of - digital back jaw centre to centre type caliper as per annexure j - range 10.1 to 300 mm , supply and delivery of analog pointed type caliper as per annexure k - range 0-150 mm , supply and delivery of analog knife type caliper as per annexure k - range 0-300 mm , supply and delivery of analog knide edge type caliper as per annexure k - range 10-200 mm , supply and delivery of analog swivel type caliper as per annexure k - range 0-200 mm , supply and delivery of magnetic dial stand suitable for holding stem sizes 6 mm and 8 mm as per annexure l , supply and delivery of magnetic dial stand suitable for holding stem sizes 4 mm, 8 mm and 3 per 8 inch as per annexure l , supply and delivery of magnetic dial stand with fine adjustment suitable for holding stem sizes 6 mm and 8 mm as per annexure l , supply and delivery of magnetic dial stand with fine adjustment suitable for holding stem sizes 4 mm, 8 mm and 3 per 8 inch as per annexure l , supply and delivery of magnetic dial stand - mini - as per annexure l , supply and delivery of magnet dial stand - universal - as per annexure l , supply and delivery of precision level as per annexure m , supply and delivery of precision level- box type as per annexure m , supply and delivery of radius gauges - 26 leaves 90 degree arc - 0.5-13 mm - as per annexure n , supply and delivery of radius gauges - 34 leaves 180 degree arc - 1-7 mm - as per annexure n , supply and delivery of radius gauges - 32 leaves 180 degree arc- 7.5 -15 mm - as per annexure n , supply and delivery of radius gauges - 30 leaves 180 degree arc-15.5 - 25 mm - as per annexure n , supply and delivery of metric screw pitch gauges - 21 leaves - 0.4 -7 mm - as per annexure o , supply and delivery of unified screw pitch gages - 30 leaves - 4-42 tpi - as per annexure o , supply and delivery of whitworth screw pitch gages - 28 leaves - 4- 60 tpi - as per annexure o , supply and delivery of digital vernier depth gauge - hook end - 10.1-210 mm - as per annexure p , supply and delivery of digital vernier depth //bid details 2 / 83 annexure p , supply and delivery of digital vernier depth gauge - mini - 0- 25 mm - as per annexure p , supply and delivery of dial depth gauge - 0-200