Latest tee clamp Tenders | Government tee clamp Tenders

Central Government/Public Sector

CTN :45547055

01 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric point machine rotary locking type, high thrust 220 mm throw,ac immunity 160 v ac,non trailable to operate on 110v dc completed with lock detector slides, cable termination box as per rdso specification no.irs: s: 24-2025 rev 3.0 or latest amendment. 1.the point machine and ground connections are as per drawing no. mentioned in rdso's letter no. sts/e/pm/220 mm vol-1 dated 23.5 2019. ground connection shall be as per rdso drawing no. rdso/s-3454 alt.-a consisting of (i) 1 in 8.5 turn outs bg 60 kg on prestressed concrete sleepers fitted with irs point machine ( 220 mm throw) for independent switch locking and clamp point lock (160 mm throw of point) with p bracket as per drawing no. rdso/s- 3454 alt.-a (ii) facing point bg switch extension bracket/insulation plate left hand and right hand as per drawing no. rdso/s-3591-3592-3593 (iii) facing point bg detector rod far end/near end as per drawing no.rdso/s-3594-95 (iv) facing point bg lock rod far end /near end as per drawing no. rdso/s-3596-97 (v) detector rod lug and lock rod lug as per drawing no. rdso/s-3598 (vi) special ms plate for s&t fittings on psc sleepers as per drawing no. rdso/t-3901 (vii) clamp type lock 60kg (tws)-bg-bolt special head as per drawing no. rdso/s/3599 alteration if any are applicable. one set of tools in a suitable tool box shall be supplied along with every 5 nos. of point machines consisting of (i) m6/m8/m18/m22/m20 box spanners (ii) m10/12 spanners (iii) adjustable wrench (iv) screw driver 300 mm long. 1:8.5 turnout. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45547281

06 Jul, 2026 NA

Bhavnagar - Gujarat

Tender For supply of tube clamp galvanized steel with rubber, fit to conduit size nw23, as per annex-a, taba8, special repair no.- 5 of specification no. rdso/pe/spec/ac/0138- 2009 (rev-1) along with suitable screw m6x25 hex head ms yellow zinc plating with nut note -to be procured from approved vendors of rdso specification no.-rdso/pe/spec/ac/0138-2009 (rev.1) [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45550501

20 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply of cage clamp type terminal block 57 amp, 1000 volt suitable for wire termination, push in type as per rdso modification no. rdso/pe/ms/tl/0097-2025 (rev-0) or latest, suitable for switch board cabinet of lhb ac coaches. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45506174

09 Jul, 2026 20.32 Lacs

Aligarh - Uttar Pradesh

Tender For tender for supply of spares of bottom ash hopper system - feed gate with wedge , part no.- 3 & 33 drg. no. 551-40/069-01 , bush , part no.- 6 , moc - phospher bronze , drg. no. 551-40/069-01 , roll teeth , part no.-1 , moc -14% mn. steel , drg. no 551-40/071-01 , , 200 nb x 250 nb expender tees , elbows & bends , gate frame seal (feed gate spares drg. no. 551-40/069-01) , shaft sleeve , part no.- 7 , moc - s.s. aisi-410 , drg. no. 551-40/071-01 , feed gate wear liner with slotted csk m10x65 drawing no. 551-40/069-01 , block , part no.- 14 , moc - ms , drg. no. 551-40/069-01 , guide roller od-142 mm , id- 46 mm , thickness- 50 mm , guide roller bush od-46mm , id- 35mm , thickness- 5.50 mm moc gun metal , nozzle holder , part no.- 2 , moc - cast iron , drg. no.551-40/067-01 , combination tube (jet pumps spares drg. no. 551-40/67-01) , fixing clamp (feed gate spares drg. no. 551-40/069-01) , wedge , part no.- 33 , moc - ci fg 260 is 210 , drg. no. 551-40/069-01 , shaft , part no.- 24 , moc - c- 45 is 1875 , drg. no. 551-40/069-01

Central Government / Public Sector

CTN :45548614

22 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of set of module twins plate and fuse holders suitable to fit mobile charging unitfor tata seat of vande bharat chair car. one set consists of the following items given below. 1). 3 module twins plate (white base+cover) only, suitable for accomodating scoket code: 1110 & usb socket code:- 1138 = 100 nos. 2). 6 module twins plate(white base+cover) only, suitable for accomodating socket code: 1110 & usbsocket code: 1138 = 130 nos. 3). fuse holder with ms clamp and 2a protectron fuse, = 100 nos. (supplier size and measurements should exactly match with above product)accepted make/brand- oswin ,ssk,reins [ warranty period: 30 months after the date of delivery ] ]

CTN :45543820

04 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of amp dp , mcb 32 amp dp , pvc round block , main switch 32 amp with spn 240v , change over switch 32 amp dp , angle holder , mcb box 6 way spn , solar lantern 10 watt , exhaust fan pvc body square type frame with louvers shutter , exhaust fan 450 mm sweep , pvc switch board 6 points , earthing plate gi 600 x 600 x 6 point 3mm , ci cover with frame 300x300x10mm with locking arrangement , gi pipe 20mm dia medium grade isi marked for watering , gi pipe 40mm dia medium grade , gi strip 25 mm x 4mm 15m long , gi reducer 40 x 20mm dia isi marked , ms rod 6mm dia 2 ft long , charcoal dust , common salt , gi funnel with wiremesh , 5 mm dia 30 mm long gi bolt with nut , lightning rod , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100 mm dia, 2.00 mtr long medium grade with base plate , back fill compound of non corrosive granulated obelique gel form chemical and hygroscopic gel conductive mineral 10 kg bag , ci manhole cover of size 30 cm x 30 cm x 7 mm thick with frame , aluminium strip 25 x 3 mm , gi strip 32 x 5 mm , gi strip 32 x 6 mm , iron spikes 18 inch long 10 mm dia , gi nipple 20 mm dia and 10 cm long , lightning terminal copper with 05 nos prong 15 cm long , ms clamp 40 x 2 mm with nut and bolt complete , gi wire 3 mm dia , gi reducer socket 40mmx20mm , gi pipe 40 mm med grade isi marked , insulator for fixing down conductors , synthetic enamel paint 1st quality , oil bond distemper 1st quality in off white colour , taurpentine oil , paint brush 75mm , panting brush 50 mm size , fan hook made of 12 mm ms round bar to be hanged from purlin , texture finished gypsum board false ceiling panel of size 595 x 595 mm x 8 mm thick with water proofing film on back side , texture finished gypsum board false ceiling panel of size 600 x 600 mm 9 mm thick with water proofing film on back side , ms binding wire 0 point 90mm dia , integral water proofing compound , vitrified coloured floor tiles of size 600 x 600 x 10mm , anti- skid coloured floor tiles of size 300 x 300 x 7 to 8mm , white cement , leak proof compound , synthetic enamel paint og colour 1st quality , synthetic enamel paint brown colour 1st quality , red oxide zinc chromate primer for metal surfaces , wooden primer white colour , weather coat exterior emulsion , mild steel chromium plated 25mm dia and 3mm thickness drapery rod with both end decorative end brackets and knobs of 1 point 30 mtr long , chair revolving with designed fabric upholstered type , chair office cushion , office table , office table steel , pvc chair with arms , mild steel dunnage , steel racks , steel almirah , workstation table comprising 04 independent unit modular type tables as per drawing

CTN :45544096

23 Jun, 2026 3.30 Lacs

Agra - Uttar Pradesh

Tender For supply of taking down of unserviceable summersible pump , supply and fixing of upvc column pipe , supply and lowering commissiong and tesing only of submersible pump , supply and fixing pvc insulated submersible cable , supply and fixing dol submersible motor controller starter , m and l for ms well cap , ms clamp , s and f cast iron adopter , m and l for pvc wire rope

CTN :45543129

24 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of mm , gate valve 20 mm dia , ppr pipe 32 mm dia , ppr pipe 20 mm dia , ppr socket 32 mm , ppr socket 20 mm dia , tank connector 32 mm , m seal 150 gm pkt , taflon tape roll isi marked , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , pvc waste pipe cp coupling 32 mm dia , pvc pipe 110 mm dia each 3 mtr length , pvc bend110 mm dia , p trap vitreous china , cp grating 100 mm dia , s trap vitreous china , distribution box 6 way double door spn comma 240 volts copper bus bar and neutral link earthing stud conforming to is 13032 and is 8623 double door type comprises with the mcb , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1 point 5 sqmm single core frls confirming to is 1554 part 1 1988 , cable pvc insulated elecric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2 point 5 sqmm single core frls confirming to is 1554 part1 1988 , pvc casing capping 1 inch x 6 feet long medium grade snow white , pvc casing capping 3 oblique 4 inch x 6 feet long medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 20w rechargable type 230v box type 2 feets with crca body pre coated white and prewired for led tube complete , screw full thread 6 x 19 mm isi marked comma 200 nos pkt , pvc switch board snow white size 7inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , service cable pvc insulated aluminium conductor comma 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed in service connection 10 sqmm 2 core , ceiling rose three terminal snow white , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts rechargable type , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , pvc l bend and t junction joint for pvc casing and capping , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings comma drilled with 2 nos holes for 6 mm dia near one side , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw , aluminium strips 25 x 3 point 0 mm , galvanized iron strip 32 x 6 mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings comma drilled with 2 nos holes for 6 mm dia near one side , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , double sleeping bunk alongwith ply wood and mattress , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs and above with capacity 4 ltrs above min output 7000 btu per hrs incl all accessories , kassi with handle , black steel sr shovel //bid details 2 / 76 spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 m

CTN :45551588

24 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of test bench pump mounting bracket , rotary pump bend spanner , ratchet combination wrech , clamp meter ms 2101 digital , inch socket , magnetic tray

CTN :45543584

27 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of high security weld mesh panels of size 2600 mm x 800 mm as per tech spec att , punched tape concertina coil 850 mm with 18 loops as per tech spec att , punched tape baby concertina coil including spike and handle have 56 turns with diameter of 610 mmas per tech spec att , fence post type circular hollow section length shall be 3 point 4 mtrs as per tech spec , truss support post with rail end cap type 76 mm dia with 3 mm thickness as per tech spec att , truss support post with rail end cap type rail end cap fitting of 76 mm as per tech spec att , straining y-arm for supporting top ptcc as per tech spec att , intermediate y- arm for supporting top ptcc as per tech spec att , razor running tape 2 point 5 mm dia length of each coil shall be 95 mtrs and weight of each coil shall be 9 point 2 kg as per tech spec att , omega clamp - 89 mm dia 35 mm width 3 mm thickness as per technical specification att , accessories for fitting truss support post brace band - 89 mm, 41 mm width, 4 mm thickness as per tech spec att , accessories for fitting y arm mushroom head bolt with breakable head safety nut m8 x 120 as per tech spec att , eye bolt with loop nut m8 x 100 of material ss 304 conforming to is 6911of 2026 as per tech spec att , anchor rod 10mm dia 300mm long gi rod tie with fence post as per tech spec att , tie wire 1 point4mm dia of 100mm length wire coformig as per tech spec att , flat clamps for panel connection flat conforming to is 2062 of 2011 as per tech spec att , ss 304 mushroom head bolt m8x25 sheet metal is 1730 is of 8535 - 1987 material of ss 304 as per tech spec att , high security weld mesh panels 2600 mm x 1000 mm with weight of 11 point 02 kg as per tech spec att. , punched tape concertina coil of 1050 mm with 18 loops as per tech spec att , fence post type circular hollow section length shall be 2 point 8 mtrs and weight shall be 15 point 02 kg as per tech spec att , across fence post clamp - 76 mm dia, 35mm width, 3mm thick material ms with hot dip galvanized to 350 gsm as per tech spec att , mushroom head bolt with breakable head nut m8x50 as per tech spec att , ptcc rod 10 mm dia 2 point 64 mtr long ms rod as per tech spec att , post cap as per tech spec att , brace band-76 mm 41mm width, 4mm thick material ms with hot dip galvanized to 350 gsm as per tech spec att , rail end cap of ms as per tech spec att , hog ring as per drawing. to secure ptc coil to ptc coil and also ptc coil to panels. wire dia 3mm as per tech spec att //bid details 2 / 69

Tee Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

corporations/Associations/Others

Central Government / Public Sector