Latest tee union Tenders | Government tee union Tenders

corporations/Associations/Others

CTN :45285961

26 May, 2026 7.59 Lacs

Nellore - Andhra Pradesh

Tender For supply and delivery & fixing of electrical items and o&m of water supply as part of summer action plan for 18mld ss tank kohturu of nellore municipal corporation - 1 s.q mm copper wire coil( finolex) mat-02748 , 100 hp motor terminal plate , 100 mm cl earth pipes 2.5 mtrs long , 16 ams ss command , 20w led tube light set (crompton make) , 300 mm x 600 mm rubber mats for pannel boards , 33 kv electrical rubber protection gloves for hands , 4" ms bore clamp set , 5 ton chain block 10 mtrs (vital make) , bosch 50 ti x line tin coated set /drill bits , chemical earth pits , engaging of jcb on hire basis including cost and conveyance charges etc., complete , finolex 2.5 sqmm 4 core round copper wire 100 mtr , gi earth strip , insulation tape role , l/t 63 ams 3 pole isolater , l/t mn2 therminal overload relay (13 to 23 ams)40 contactor , l/t mnx 40 contactor , max hydralic 46 grade oil 26 ltrs , ms flat bar 10mm x 60mm , pannel board locks and keys , plantex secura 6 step alluminium ladder , providing welding work to kondlapudi raw water pumphouse maingate including cost and conveyance etc., complete , providing, laying, spreading and compacting graded hbg crushed stone aggregate to wet mix macadam specification including cost, seignorage of all materials and including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with vibratory roller to achieve the desired density etc., as directed by the engineer-in-charge and as per mort&h specification.406 (4th revision) for finished item of work , supply and erection of color gi sheets of sabrand jindal 0.5mm thick tct ppgl az-70 550mpa isi 5965 - 2012 for roofing including all the necessary bolting fixing arrangement, joint plate, edge cover, ridge etc complete and as directed by the site engineer , supply and transportation of following items 60w led street light (crompton make) , taparia ring flat spaner set , taparia s-15 hxl 1/2 dr socket set 24 pees , themisto th-m90 auto range clam meter , waco hand driven genarater type insulation 5000 volts 5-10000 ohms-meggar

CTN :45142207

25 May, 2026 9.90 Lacs

Hoshangabad - Madhya Pradesh

Tender For notice inviting item rate of various item for maintanance and repair work of water supply for financial year 2026-27 at timarni - texomo/ luvi/ tormac/ cri company 3 hp submersible pump (with bronze /stainless steel (cf8m) impeller) up to 8 stages, texomo/ luvi/ tormac/ cri company 5 hp submersible pump (with bronze /stainless steel (cf8m) impeller) up to 8 stages, texomo/ luvi/ tormac/ cri company 7.5 hp hp submersible pump (with bronze / stainless steel (cf8m) impeller) up to 8 stages, texomo/ luvi/ tormac/ cri company 10 hp submersible pump (with bronze /stainless steel (cf8m) impeller) up to 12 stages, texomo/ luvi/ tormac/ cri company 12.5 hp submersible pump (with bronze /stainless steel (cf8m) impeller) up to 12 stages, copper cable 3 core 4 square mm, copper cable 3 core 6 square mm, aluminium 4 core cable 10mm, aluminium 4 core cable 12mm, aluminium 3 core cable 16mm, cutout 32 ampere, cutout 63 ampere, cutout 100 ampere, suction pipe 2 inch, suction pipe 2.5 inch, suction pipe 3 inch, hdpe pipe 2 inch, hdpe pipe 3 inch, hdpe pipe 0.5 inch 8kg, hdpe pipe 0.75 inch 8kg, hdpe pipe 1 inch 8kg, hdpe pipe 4 inch 8kg, hdpe pipe 0.5 inch 6kg, hdpe pipe 0.75 inch 6kg, hdpe pipe 1 inch 6kg, hdpe pipe 1.25 inch 6kg, hdpe pipe 0.5 inch 10kg, hdpe pipe 6 inch 10kg, hdpe pipe 1 inch 10kg, hdpe pipe 1.25 inch 10kg, pvc loose nali 0.75 inch, pvc loose nali 1 inch, pvc loose nali 1.25 inch, pvc pipe 90mm 4kg, pvc pipe 90mm 6kg, pvc pipe 90mm 8kg, pvc pipe 110mm 4kg, pvc pipe 110mm 6kg, pvc pipe 110mm 8kg, pvc pipe 160mm 4kg, pvc pipe 160mm 6kg, pvc pipe 160mm 8kg, pvc pipe 200mm 4kg, pvc pipe 200mm 6kg, pvc pipe 200mm 8kg, pvc t 12mm 6 kg, pvc t 25mm 6 kg, pvc t 32mm 6 kg, pvc t 63mm 6 kg, pvc t 75mm 6 kg, pvc t 90mm 6 kg, pvc t 110mm 6 kg, pvc t 160mm 6 kg, pvc t 200mm 6 kg, pvc elbow 12mm 6 kg, pvc elbow 25mm 6 kg, pvc elbow 32mm 6 kg, pvc elbow 63mm 6 kg, pvc elbow 75mm 6 kg, pvc elbow 90mm 6 kg, pvc elbow 110mm 6 kg, pvc elbow 160mm 6 kg, pvc elbow 200mm 6 kg, reducer socket 12x25mm 6 kg, reducer socket 25x32mm 6 kg, reducer socket 32x63mm 6 kg, reducer socket 63x75mm 6 kg, reducer socket 63x32mm 6 kg, reducer socket 63x90mm 6 kg, reducer socket 90x110mm 6 kg, reducer socket 90x160mm 6 kg, reducer socket 160x200mm 6 kg, end cap 12mm 6 kg, end cap 25mm 6 kg, end cap 32mm 6 kg, end cap 63mm 6 kg, end cap 75mm 6 kg, end cap 90mm 6 kg, end cap 110mm 6 kg, end cap 160mm 6 kg, end cap 200mm 6 kg, pvc handle valve 0.5 inch, pvc handle valve 0.75 inch, pvc handle valve 1 inch, pvc handle valve 1.25 inch, pvc handle valve 2 inch, pvc handle valve 2.5 inch, pvc handle valve 3 inch, mta 0.5 inch, mta 0.75 inch, mta 1 inch, mta 1.25 inch, mta 2 inch, mta 2.5 inch, pvc pipe 63mm 4kg, pvc pipe 75mm 4kg, fta 1 inch, fta 3 inch, fta 2 inch, fta 4 inch, pvc repair patta 2.5 inch, pvc repair patta 3 inch, pvc repair patta 4 inch, pvc repair patta 6 inch, pvc repair patta 8 inch, pvc repair patta 10 inch, pvc bend 63mm, pvc bend 75mm, pvc bend 110mm, pvc bend 160mm, pvc bend 200mm, column pvc pipe 1 inch 20kg, column pvc pipe 1 inch 27kg, column pvc pipe 1.25 inch 20kg, column pvc pipe 1.25 inch 27kg, column pvc pipe 2 inch 20kg, column pvc pipe 2 inch 27kg, rubber waysr 2 inch, rubber waysr 2 point 5 inch, rubber waysr 3 inch, rubber waysr 4 inch, geti, pawda, hattha wood, pvc tub 18 no., tagari pvc, aari patta, aari handle, torch, solven 100 gram, solven 250 gram, band patti 0.50 inch clip, band patti 0.75 inch clip, band patti 1.25 inch clip, band patti 2 inch clip, band patti 2.5 inch clip, band patti 3 inch clip, line pana 6 inch, line pana 9 inch, line pana 12 inch, line pana 24 inch, line pana 30 inch, pana set all size, tester, screwdriver, pliers, steel grip tap, pechroll, teflon tap, grees, glan dori 10mm, glan dori 12mm, nylon rassi, nareti rassi, gloves leather, grinder patta, grinder concrete patta, m-seal, ferrule 1/2 inch, ferrule 1/4 inch, clamp 3 inch, clamp 4 inch, clamp 6 inch, lock heavy, hich pin, brass handle valve 0.5 inch, c

corporations/Associations/Others

CTN :45192961

26 May, 2026 5.76 Lacs

Jhunjhunu - Rajasthan

Tender For regular operation and maintenance of water supply scheme with material at industrial area, residential colony and commercial complex jhunjhunu phase-i and ii - item rate, regular operation of tube wells installed with pumping machineries with round the clock monitoring, including complete repair and maintenance of pump set with cost of material and labour required for repairing/rewinding, lowering and un-lowering etc.the scope of work also includes repair and maintenance of panel board, main switches, kit-kates, electric connections, service cableand submersible cables inclusive of cost of material and labour required for uninterrupted functioning of tube wells.it is also inclusive of complete repair and maintenance of pipes connected with pump and motor, its replacement, if required, regular upkeeping of log book etc. and other works as mentioned in tender document / scope of work complete in all respect and as directed by engineer in-charge., regular operation and maintenance of pump houses located at wss complex/complexes.the work includes operation of distribution line main valves for daily supply of water of the industrial area at supply times specified by corporation. regular operation of pump house installed with existing centrifugal / monoblock pump / motors, with round the clock monitoring, including complete repair and maintenance of pump sets, connecting suction/delivery pipes jointing material, panel, main switches, kit-kates, electric connections, service cable including cost of material and labour required for repairing / rewinding, removal and replacement etc. for uninterrupted functioning of electric panels and pump sets with regular up-keepment of log books, repair of leakages in pump glans and ms/ci/ac pipeline system inside of wss campus complete, regular chemical dosing in cwr maintaining general cleanliness at pump house and wss campus complete in all respect as directed by engineer in-charge., repair & maintenance of existing distribution / rising main pipe line system consisting of ac pressure pipeline /pvc/upvc/hdpe/ci/ di lines for maintaining smooth water supply in area covered under the scope of work.the scope of work includes timely repairing of leakage in all existing distribution / rising main pipeline of all sizes by digging out suitable size of pit in soft & loose soil / hard soil including cutting of bituminous / cement concrete / wbm / wmm surface at any site of work at no extra cost.it is also inclusive of cutting of pipe ends, fixing of pipe pieces with jointing material to make repair leak proof and refilling the pit / trench by excavated soil by ramming it at all sides of pipes & upto ground level. contractor will do dewatering at his own level by making necessary arrangements, if required. contractor will usetheir own t&p and jointing materials, however the pipe line and sluice valves (if required) etc. shall be provided by the corporation but the contractor shall have to deposit the damaged material in riico store. but no additional payment shall be made on account of any material or transportation charges.

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45174077

24 May, 2026 20.00 Lacs

Rajsamand - Rajasthan

Tender For tendor for supply of surgical and other item at rk govt hospital rajsamand - surgical and sutures, absorable gelatine spounge ( pkts ), absorbent cotton 1 kg/roll, absorbent cotton 500 gm/roll, abdominal drain kit 32 & 28, adapter 3 way per no., adheseve plaster 10 cm x 5 mtr, adheseve plaster 2.5 cm x 5 mtr, adheseve plaster 5 cm x 5 mtr, adheseve plaster 7.5 cm x 5 mtr, arms ceeling pouch (all size), arterio venous blood tubing ( make : nipro ), aterio venous fistula needles 16 g ( make : nipro ), ankel blinder, bk traction kit, b. p. blade (all size), baby kit ( with 7 item ), b.k. skin traction, blood administration set, clavicle brace (all size), cervical colour belt (all size), cathether mount, chest lead, cord clamp, crepe bandage 3", crepe bandage 4", crepe bandage 6", central venous catheter, crescent knife iw 1153(opthalmic), condam cathether, clavical belt all size, cervical coller all size, chest dranage bag., chest tube cathether, dark black gaggles, delivery kit ( with 5 item ), dyper for new born, dispo needle 16 no., dispo needle 18 no., dispo needle 20 no., dispo needle 26* 0.5, dispo needle 26*1.5, disposable insulin syringe graduation upto 100 units with fixed 28 g needle, disposable insulin syringe graduation upto 40 units with fixed 28 g needle, disposable needle 24 no., disposable needles 18g, disposable needles 23g, disposable needles no.21, disposable needles no.22, disposable sterile gloves size 6.5 , disposable sterile gloves size 7 inches, disposable sterile gloves size 7.5 , disposable syringes with needle - cgs 10cc, disposable syringes with needle - cgs 2cc, disposable syringes with needle - cgs 5cc, disposable syringes with needle - cgs 50cc, disposable syringes with needle - cgs 20cc, dispossable 3 layer mask, elastic adhesive bandage 4", endo tracheal tube no. 2.0 -5.5 cuffed, endo tracheal tube no. 6.0 - 9.0 cuffed, endo tracheal tube no. 2 to 4.5 plane, endo tracheal tube no. 5 to 9 plane, enema (saline + glycerine) (proctoclysis enema sodium phosphet enema), finger splient, fiba cast 6", fibar cast 4 ", foleys urinary catheter size 16/14/12/10, foleys urinary catheter size 18,20,22, foleys cathether size 6 ,8, gauge than 120x9 meter, g-dress 30 cm, g-dress 25 cm, g-dress 20 cm, g-dress 15 cm, g-dress 10 cm, g-dress 5 cm, hme filter, high flow mask, id tag for new born, id tag for adult, i.v.infusion set, infant feeding tube 6, infant feeding tube 8, infant feeding tube 10, intravenous set (adult) with airway and needle, iv cannula (3 way) size 20 to22, iv cannula (2 way) size 24, iv cannula (3 way)16,18, keratone kinfe iw 116 12.8 mm, knee brecce all size, knee cap all size, knee brecce hingd, knee support, knife blade no 11, knee cap all size, micro i.v. set, micropore 1 " 9.1 meter, micropore 2 "9.1 meter, micropore 3 "9.1 meter, micropore 4 "9.1 meter, microscope bulb, mucus extractor, n- 95 mask, nabuliser mask (adult), nabuliser mask (child), niv mask, l s belt, oxygen mask adult, oxygen mask pediatric, pedia dripset, plaster of paris bandages bp 15cm x 2.7mts / roll, plaster of paris bandages bp10cm x 2.7mts / roll, pmo line 50 cm, pmo line 100 cm, pmo line 150 cm, pmo line 200 cm, povidion 7.5% scrub 100 ml, pouch aray silling, rubber examination glove all size, romo drain under water seal, romovac set (close wound sucction set) all size, pure cell rc single filter for thelisimia patient, rebelt all size, ryles tube (p.v.c.) size: children: 10 & 12, ryles tube (p.v.c.), size: adult: 16/ 18/14, sanitary napkin, skin grafting blade, soft cast 4", soft cast 6", spinal needle (b.d.) 23 to 26, spinal needle (b.d.) 27, spinal needle romson 25 to 26, suction tube all size, surgical blade size 15 in ( pkt of 100 ), surgical blade size 22 ( pkt of 100 ), syring 50ml, tenis elbo support, torniquite 4", torniquite 6", taylor brace, trachostomy tube all size (without cuffed), trachostomy tube all size cuffed, t-tube, tylor brace, thumb spica, urethral catheter (k-90), urethral catheter (k

CTN :45282476

17 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of one set of ss tubes and double ferrule for brake piping arrangement of lhb bogies consisting of 1. bulk head elbow (with conical seating) 3/4"od x m26 x 1.5(m) to drg.no.icf/std-3-5-113,item-1,alt "c" qty-3 nos. 2. bulk head elbow 3/4" od to drg.no.icf/std-3-5-117-item-1,alt"b",qty-l no. 3. male elbow (with conical seating) 1/2" bspt(m) x m26 x 1.5(m) to drg.no. icf/std-3-5-115,item-1,alt "nil", qty-4 nos. 4. special adaptor 1/2" bsp(m) x 1/2" bsp(f) to drg. no. icf/std-3-5-116, item-1,alt"c",qty-4 nos. 5. male branch tee union" (with conical seating) 3/4"od x m26 x 1.5(m) to drg.no. icf/std-3-5-132,item-1, alt "nil" ,qty-l no.6. bulk head swivel union 3/4" od to drg. no. icf/std-3-5-133-item-1, alt "nil" qty-2 nos. 7. union tee 3/4" od to drg. no.icf/std-3-5-018-item-2,alt"b",qty-1 no. 8. bulk head male connector (with conical seating) 3/4"od x m26 x1.5(m) to drg. no.lwscwac-3-2-005,item-1, alt "nil" qty-2 nos. 9. ss seamless pipe 3/4" od x 6000 mm astm a269 gr.tp 304 to icf/md/spec- 166,issue status-01,rev-04, qty-l no. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45274703

25 May, 2026 51.8 Thousand

Multi City - Telangana

Tender For laying of water supply pipe line in quthbullapur circle -25 ghmc office building in ward no: 131, quthbullapur, quthbullapur circle - 25, ghmc. (2nd recall) (item no.3)

Central Government/Public Sector

CTN :45254509

18 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of isolating cock (3/4" bsp) for water line designed for pressurised flushing system make: spac, part no. con.0001287, product comply with iec61373, cat 2 & tested from nabl authorised lab" [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45255342

29 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of one set of ss tubes and double ferrule for brake piping arrangement of lhb bogies consisting of 1. bulk head elbow (with conical seating) 3/4-inch od x m26 x 1.5(m) to drg. no. icf/std-3-5-113 item-1, alt -c, qty.3 no?s 2. bulk head elbow 3/4-inch od to drg. no. icf/std-3-5-117 item-1, altbqty-1nos 3. male elbow (with conical seating) 1/2-inch bspt(m) x m26 x 1.5(m) to drg. no. icf/std-3-5-115 item-1, alt- nil, qty-8nos 4. special adapter 1/2-inch bsp (m) x 1/2-inch bsp(f) to drg. no. icf/std-3-5-116 item-1, alt-b qty- 4 nos 5. male branch tee union (with conical seating) 3/4-inch od x m26 x1.5(m) to drg. no. icf/std-3-5-132 item-1,alt-nil, qty-1nos 6. bulk head swivel union 3/4-inch od to drg.no. icf/std-3-5-133 item-1, alt-nil. qty-2 nos 7. union tee 3/4-inch od to drg. no. icf/std-3-5-018 item-2, alt-a. qty-1no. 8. bulk head male connector (with conical seating) 3/4-inch od x m26 x 1.5(m) to drg.no. lwscwac-3-5-005 item-1, alt-nil. qty-2 nos 9. ss seamless pipe 3/4-inch od x 6000 mm astm a269 gr. tp 304 to icf/md/spec-166 issue status-01, rev-04, qty-1no. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45238373

28 May, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of tee union 3/8" (var-05) as per specn. gt51034/02 with matl as per specn. gt51034/02 , female connector 3/8" bspt as per specn. ba53039/00 with matl as per soecn. ba53039/00

Tee Union Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector