Latest teeth Tenders | Government teeth Tenders

Central Government/Public Sector

CTN :45610068

30 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of tungsten carbide circular saw blade 180 mm dia x 2.5 mm width x 60 nos. of teeth x 25.4 mm bore dia. h.w. make- bosch or similar [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45610298

07 Jul, 2026 NA

Hubli - Karnataka

Tender For supply of set of gauges for wap-7 loco tm shaft pinion 20 teeth [mating bull gear 72 teeth] as per rdso drawing no. skdp 3473, alt -3 or latest and material tool steel to is: 3748/90, hardness: 50/55 hrc. set consisting of 03 items as follows. [1] profile checking gauge [p value] with feeler gauge size 0.20mm, 0.25mm, 0.30mm, 0.35mm, 0.40mm. qty/set. -01 no. [2] tooth spacing k value checking go gauge size: 78.470 mm/ 78.491 mm. qty/set. - 01 no. [3] tooth spacing k value checking no go gauge size[service limit] : 78.120mm. qty/set. - 01 no. [ warranty period: 30 months after the date of delivery ] ]

CTN :45601420

29 Jun, 2026 NA

Surendranagar - Gujarat

Tender For supply of filter element , air filter element , transmission filter , rear combination lamp lh , rear combination lamp rh , fuel filter assembly , engine oil filter , tooth plate , plough bolt , nut bolt , pin pivot , head lamp , door lock lamp rh , throttle cable , air filter element inner , air filter element outer , oil filter , spider kit , hex bolt , loader teeth , locking plate

CTN :45601507

09 Jul, 2026 NA

Siang - Arunachal Pradesh

Tender For supply of a2sc0i284 toggle plate , f1s19i153 toggle block bolt , f1s00i259 distant plate bolt for fixed jaw , f1s19i263 distant plate bolt for swing jaw , r3sn0i176 fixed jaw 22 teeth , r3sn0i177 swing jaw 21 teeth , r3sn0i170 distant plate fr fixed jaw , r3sn0i167 distant plate fr swing jaw , b1s00i040 p 511 pedestal bearing , r2sn0i171 side plate non drive end , r2sn0i172 side plate drive end , a1s09i284 jaw stock liner , f1s09i280 toggle block liner , f1s00i264 draw bar with nut with bolt , 500ii0002 impact idler , airfltpri p628327 air filter element pimary , lubflt125 f7a05000 extended service lube filter , havmcb20a dsmsctpf020 mcb standard c20 230v

corporations/Associations/Others

CTN :45601755

09 Jul, 2026 15.25 Lacs

Bardhaman - West Bengal

Tender For supply of spares of roller screen in chp dstps andal d d - shaft (with key) of roller screen , matl-en8 forged ref. tkii drwg no-r.e08.100.20.50.0(1) , lh long shaft(consisting of input shaft , intermediate shaft and output shaft) along with key material-en 19 , ref. tkii drwg no-r.e08.200.20.50.0(1) , bevel pinion-26 teeth (spare of roller screen) (material- en-353) ref. tkii drwg no-r.e08.200.20.50.0(1) , bevel pinion-20 teeth (spare of roller screen) (material- en-353) ref. tkii drwg no-r.e08.200.20.50.0(1) , bevel gear with coupling-26 teeth (spare of roller screen)(material- en-353) ref. tkii drwg no-r.e08.200.20.50.0(1) , key-100 lg. x 20 w x 18 thk. , material-en 8 for longitudinal shaft of roller screen , key-100 lg. x 16 w x 16 thk. , material-en 8 for longitudinal shaft of roller screen , bearing housing intermediate bearing for brg 22217 of roller screen tkii drawing no. r.e08.200.20.50.0(1) , labyrinth ring for roll assembly of roller screen (2000w x 3000l) , seal ring-non drive end for roll shaft of roller screen , 2000w x 3000l , seal ring-drive end for roll shaft of roller screen , 2000w x 3000l , bush (spare of roller screen) , od-110 mm , id-80 mm , length- 102 mm , material- en8 forged , ref.tkii drwg no-r.e08.100.20.50.0(1) , item no-17 , bush (spare of roller screen) , od-110 mm , id-80 mm , length- 65 mm , material- en8 forged , ref.tkii drwg no-r.e08.100.20.50.0(1) item no-11 , coupling half for longitudinal shaft of roller screen tkii drawing no. r.e08.200.20.50.0(1) , bushing non-drive side without bearing (spare of roller screen) ref. tkii drwg no-r.e08.100.20.50.0(1) , bushing drive side without bearing ref.tkii drwg no-r.e08.100.20.50.0(1)

corporations/Associations/Others

CTN :45601972

02 Jul, 2026 25.01 Lacs

Bardhaman - West Bengal

Tender For supply of esp spares for dstps u2 overhauling d d - cerm shaft assy (1 set = shaft end 2 nos. + d 50 shaft 4 nos. + sleeve 4 nos. + set ring 4, nos.). esp type:- faa-10x 45h- 2x90140-2, for esp of 500mw. shaft-en-24, gd rapping shaft assembly for esp 500 mw (1 set = shaft end 1 no. + d50 shaft 2 nos. +, sleeve 2 nos. + set ring 2 nos) esp type:- faa-10x 45h- 2x90140-2, for esp of 500mw. shaft-, en-24, eerm vertical shaft assembly d-40 for esp 500 mw (1 set = shaft 3 nos) esp type:- faa-10x, 45h- 2x90140-2,for esp of 500mw. shaft-en-24, eerm d-50 shaft assembly for esp 500 mw(1 set =shaft 2 nos.+ sleeve 1nos. + set ring 2, nos. +key 1 nos.) esp type:- faa-10x 45h- 2x90140-2. for esp of 500mw. shaft-en-24, plain bearing,mat: c.i. gr-25 esp type:- faa-10x 45h- 2x90140-2, inner arm for cerm/eerm/gdrm outer arm hammers (2 half with all nuts and bolts;, flat - ms is 2062) esp type:- faa-10x 45h- 2x90140-2, outer arm for collecting rapping system, roller wheel- en-08, pin -en-24, arm and washer- ms is, 2062 esp type:- faa-10x 45h- 2x90140-2, outer arm for emitting rapping, mechanism, roller wheel- en-08, pin -en-24, arm and washer- ms is 2062esp, type:- faa-10x 45h-2x90140-2, pin wheel big for eerm 500 mw, material:c-45 & pin-en-24 esp type:- faa-, 10x 45h- 2x90140-2, pin wheel small for eerm 500 mw mat: plate (ms, is 2062), round teeth (en-24), esp type:- faa-10x 45h- 2x90140-2, shock pad, en-24 esp type:- faa-10x 45h- 2x90140-2, thrust pad (of thrust bearing) for eerm esp type:- faa-10x 45h- 2x90140-2, material: en-, 24, set ring, material: en-8 esp type:- faa-10x 45h- 2x90140-2, thrust bearing for eerm, esp type:- faa-10x 45h- 2x90140-2, material: en-24, seam for plain bearing adjustment(2 mm) esp type:- faa-10x 45h- 2x90140-2, round cross section. non asbestosrope of size 8 sqmm fors ealing/packingpurpose. capcity upto 250, degree celsius, square cross section. non asbestos rope of size 25 sq mm for sealing/packing purpose.capcity upto, 250 degree celsius, guide angle 75x50x6mm for esp shock bars, length 5000mm, u slot at 300mm is2062 e250a esp, type:- faa-10x 45h- 2x90140-2, m12×50mm hex head ht bolt and nut with washer for esp, high tensile hexagonal bolts (metric thread) and nut with washer, size- m16 x 50 (full, threaded) bolt grade- 10.9 as per is:1367 nut grade- 10 as per is:1367, high tensile hexagonal bolts (metric thread) and nut with washer, size- m16 x 100 (full, threaded) bolt grade- 10.9 as per is:1367 nut grade- 10 as per is:1367

CTN :45609397

09 Jul, 2026 NA

Siang - Arunachal Pradesh

Tender For supply of pics c 143 01 02 002 swing jaw palte 15 teeth , pics c 1430 100 003 jaw plate fixed side 16 teeth , pics cm 143 01 02 004 toggle seat , pics cm 143 01 02 005 keeper plate , pics m 143 01 00 011 toggle plate , pics cm 143 01 00 012 toggle seat for toggle block

CTN :45609510

03 Jul, 2026 NA

Shahjahanpur - Uttar Pradesh

Tender For supply of arcing and tear drop welding in our mill roller teeth roller

CTN :45587213

02 Jul, 2026 NA

Najibabad - Uttar Pradesh

Tender For providing of custom bid for services - cast steel pinion for secondary rake carrier duly machined and tempered having no of teeth23,trpf drive duly machined and tempered having no of teeth36,cane carrier teeth 26pinion for main bagasse carrier teeth 22 and 108 bo..

CTN :45587264

02 Jul, 2026 NA

Najibabad - Uttar Pradesh

Tender For providing of custom bid for services - cast steel trash beam as per sample duly finished in all respect material is2708 approx wt1400 kg each on conversion basis, profile teeth cutting and machining charges ,cast steel crown pinion 19 teeth,16 teeth

Teeth Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others