Latest teledyne instrument spares Tenders | Government teledyne instrument spares Tenders

State Government

CTN :45456651

09 Jun, 2026 NA

Nashik - Maharashtra

Tender For overhaul work in esp inlet duct including cfd analysis, duct flow measurement test, attending duct leakages by patch welds including supply and erection of diverter plates, honeycomb & refractory in esp inlet duct at unit 4 ntps.

CTN :45430790

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of mechanical engineering lab materials - mechanical engineering lab materials, serve motor drive kitinterface l293d motor driver ic with arduino to control direction of rotation of two dc motors), bldc motor kitbldc motor 1 nobldc motor drive -1noinbuilt volt and ammeter and rpm meterinbuilt power supplyinput 230v ac, lvdt trainer kit complete educational trainer for linear variable differential transformer (lvdt) displacement measurement. built-in ac excitation source and signal conditioning circuitry for lvdt operation. micrometer assembly for precise linear movement of the lvdt core. displacement range ~10 mm with clear front-panel adjustments for zero & calibration. digital display (typically 3 -digit) for direct readout of conditioned output/displacement values. test points and banana sockets for signal observation on external instruments. self-contained unit in a durable enclosure with labeled controls and educational layout. includes user manual and patch cords for experiments. operates on 230 v ac, 50 hz mains supply., multi-cylinder petrolphase : single phase load: mechanical load with ropenumber of cylinders : 4displacement : rope brakepower : 65hp,4000 rpm,1396 ccbrand material : mild steelengine type : 4 stroke self startfrequency : 15hzfuel consumption : petrolfuel tank capacity : 5 letermorh s test rig, tail stock assemblyheavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50 75 mm stroke, hand wheel feed, dead centre mt2/mt3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300 400 mm centre height training lathe., dc motorvoltage 220-440 v dcpower - 180 w speed - 200 rpm, hydraulic cylinderdouble acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic opreated directional control valve (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., bearing with shaft assemblyteaching unit with shaft 25 35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig., coupling unit using driving and driven shaft plumber block bearing unit1. the plummer block housingmaterial: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.2. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm (ideal for lab scale).mounting: adapter sleeve mounting (h-series) to teach students how to lock a bearing onto a smooth shaft.3. shafting and couplingshaft material: ground carbon steel (en8 or en9) for high surface finish.coupling type: * flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., spring test machine load & displacement sensing load cel * capacity: 0 10 kno accuracy: 1% fs (better if 0.5% fs) displacement sensor * lvdt / digital encodero accur

Central Government/Public Sector

CTN :45434466

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - contract for mechanical maintenance of weigh feeders, weightometer, filler bin level measurement system & power cylinders at anp & anp granulation plant at rcf trombay unit.

Central Government/Public Sector

CTN :45405834

18 Jun, 2026 NA

Hubli - Karnataka

Tender For supply and commissioning of pneumatic grease gun equipped with digital grease meter and grease container of capacity 25kgs for greasing of roller bearing of traction motors and msu bearings of electric locomotives.(1) greasing meter: digital type (2)ip rating: i p67 (3)suitable grease:nlgi 0 to 3.(4)accuracy:(+/-)3% (5)control valve type: contineous flow (6)unit of measurement: in grams (7)capacity of container: 25kgs. technical specifications as per attached annexure. make: groz/ airtek/ingersoll rand/ elgi/ preston only. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45428204

12 Jun, 2026 70.00 Lacs

Jaipur - Rajasthan

Tender For supply various chemicals reagents consumable items for department of microbiology - electrical items :, absolute ethanol, acetone, alpha naphthol ar, aniline, bleaching powder, conc. h2so4, deionized water, di sodium hydrogen phosphate, ecoshield, edta powder, ferric chloride, formalin pellets, h2o2 (30%), koh pellets, kavacs,indole reagents, l - arginine, l - lysine mono dihydrochloride, liquid paraffin, immersion oil, phenol, pottasium dihydrogen phosphate, resazurin powder, xylene, xylose, sodium hydroxide pellets, sulphanilamide, vibrio cholera anti toxin, ogama, inaba, hikojima, salmonella typhi anti toxin, polyvalent -o, polyvalent -h, salmonella ta, salmonella tb, salmonella td, equipments, aluminium foil (72 meter), anaerobic system envelope with palladium catalyst (gas pak), anaerobic system envelope with palladium catalyst (gas pak), blood culture bottle (adult) glass bottle of 100 ml capacity with lid of aluminum with rubber cork in it., culture loop (nicrome) 1mm 24 gauge wire loop, culture loop (nicrome) 2mm 24 gauge wire loop, disporable petri disc 90 mm, disposable plain tube 5ml (without cap) plastic, disposable plain tube 8ml (without cap) plastic, face mask ( triple layer mask with ear loop ), filter paper box whartman no. 1, 12.5 cm circular, filter paper sheet whartman no. 1, glass marking pencils (red, white), glass test tube 125 mm x 15 mm without rim 10ml, glass test tube 10 ml, glass test tube 20 ml 150x16mm, glass test tube 75 mm x 12 mm without rim 20 ml, mccartney bottle, microcentrifuge tube with cap capacity 2 ml, perforated bucket (red, blue) 15 litre double bin, petridish glass 75 mm, petridish glass 90 mm, ph indicator strips 6.5 to 9 ph measurement, sterile autoclavable skirted plate 96 wells x 0.3 ml, sterile disposable cotton swab (individual pack), sterile disposable swab sticks with test tube, sterile storage vial 2 ml capacity with cap, sterile storage vial 5 ml capacity with cap, sterile urine container single pack, stool container with spoon, test tube dispo. 10ml with cap, test tube dispo. 10ml without cap, test tube holder bighole for 20ml test tube, triple layer mask, vaccutainer vial 4.5ml (serum activator without gel), tips 1000 ul, yellow tips ( 10-200 ul), white tips 1-10 ul, straight wire for culture, teasing needles, loop holder for culture, micropipettes 100-1000 micro liter, micro pipette 1000 micro liter, micro pipette 10-100 micro liter, micro pipette 1-10 micro liter, elisa kit, ana elisa kit, anti ds-dna igg elisa kit, anti hbc (igm & igg) total test, anti hbe elisa test kit, anti hbs antibody elisa kit, anti hbc igm elisa kit, hbeag elisa kit, hbs ag elisa kit, hcv igm elisa kit, hav igm elisa kit, hev igm elisa kit, dengue igm elisa kit, dengue ns1 antigen elisa kit, chikungunya igm elisa kit, scrb typhus igm ab elisa kit, toxoplasma igg elisa kit, toxoplasma igm elisa kit, rubella igg elisa kit, rubella igm elisa kit, cytomegalovirus (cmv) igg elisa kit, cytomegalovirus (cmv) igm elisa kit, herpes simplex virus (hsv 1 & 2) igg elisa kit, herpes simplex virus (hsv 1 & 2) igm elisa kit, antibiotics, amikacin 30 g, amoxycillin 30 g, amoxyclav 20/10 g, amphotericin b, ampicillin + sulbactum 10/10 g, azithromycin 15 g, aztreonam 30 g, bacitracin (0.04 unit), bile esculin disc, cefepime 30 g, cefixime 5 g, cefoperazone + sulbactum 75/10 g, cefoperazone 75 g, cefotaxime 30 g, cefotetan 30 g, cefoxitin 30 g, cefpirome, cefpodoxime 10 g, ceftazidime + clavulanic acid 30/10 g, ceftazidime 30 g, ceftriaxone 30 g, cefuroxime 30 g, cephalexin 30 g, chloramphenicol 30 g, ciprofloxacin 5 g, clarithromycin 15 g, clindamycin 2 g, clotrimazole, colistin 10 g, cotrimoxazole 25 g, cyclopirox 50 g, dalfopristine, daptomycin, doripenam 10 g, doxycycline 30 g, e strip for esbl detection, e strip for mbl detection, e strip oxacillin, ertapenam 10 g, erythromycin 10 g, faropenam 5 g, fluconazole 25 g, fosfomycin 200 g, furazolidone 50 g, fusidic acid 10 g, gentamicin 120 g, gentamic

Central Government/Public Sector

CTN :45454321

03 Jul, 2026 NA

Avadi - Tamil Nadu

Tender For supply of heavy duty grease pump with grease gun having in line flow meter as per specification (1) grease gun hand operated, (2) grease drum capacity 15 kg., (3) wheel for easy moving, (4) digital oval gear type meter, (5) grease flow 0.1 kg. to 2.5 kg. /min., (6) maximum working pressure 7500 psi, (7) grease discharges up to 9 gm/stroke, (8) wire braided grease delivery hose (length minimum 2.0 meter) having swivel connector assembly at both ends. (9) accuracy plus minus 3 percent, (10) unit of measurement-kg/gm/lbs, (11) battery 2 nos. of 1.5 v. make/brand: skf / groz / elgi/ ingersoll rand only. [ warranty period: 30 months after the date of delivery ] ]

CTN :45449444

26 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of 2 ch source measurement unit (smu)

CTN :45432814

11 Jun, 2026 NA

Sahibganj - Jharkhand

Tender For daily use materials/electricity/water supply/sanitary/sports/painting/hardware/computers/printers/ups/photocopy machines and their repairs/dry ration and lunch packet related items/batteries/tyres/and all materials taken on hire and other useful materials are required. very short term tender is invited through newspaper on the basis- football , football goal-post , football net , football corner flag , football cone (6 inch/1ft) , football side flag , foolball pipe (20f1) , football boot , socks full , shin guard , football goal keeper gloves , volleyball , volleyball pole (with pole padding and antenna) , volleyball net , volleyball antenna , volleyball airpump , volleyball shoes (asics/ adidas) , hockey pole , hockey stick , hockey turf ball , hockey boot , helmet with grill , hockey goalkeeper kit (complete set) , hockey goal post net , badminton racket , badminton net , badminton shuttlecocks , basketball , basketball goal post , basketball ring , basketball net , basketball board , basket ball shoes (nivia) , table tennis racket , table tennis ball , lawn tennis racket (general/best quality) , tennis ball , lawn tennis net , handball , handball pole , handball net , handball shoes (nivia air strike) , kabaddi shoes (yonex) , athletics shotput m/f (4kg/7.32kg) , athletics discus m/f (1kg/2kg) , javelin (600gm/800gm) , carrom board 42" , carrom board coins , running spikes shoes (nivia) , track suit (general) , white t shirt (sg) , white trouser (sg) , white cap , white shoes (sega) , white socks (jockey) , athletic jersey set , first aid kit , whistle , knee pad , stop watch , measurement tape , move spray , crepe bandage , hockey goal keeper gloves , ad guard , shield (small/medium/big) , momento (small/medium/big) , trophy (small/medium/big) , medal (bronze/silver/gold) , track suit (addidas/nike/reebok) , trouser (addidas/nike/reebok) , t shirt (addidas/nike/reebok) , shoes (addidas/nike/reebok) , cap (addidas/nike/reebok) , socks (addidas/nike/reebok) , unit flag/range flag , victory podium , cricket bat , cricket ball (ss, sg) , cricket wicket set , cricket keeping gloves , cricket mat , cricket bails , kho-kho pole , relay batons (aluminium) , high jump stand , cross bar (fiber) , red flag (1x1 ft) , fasner bolt (8mm,10mm,12mm) , clamp (20/25/30/32/50mm) (suprime/astrel/prince) , upvc plumbing pipe (1"/1.25"/1.5"/2") (suprime/astrel/prince) , column pipe (0.5"/1"/1.25"/1.5"/2") (suprime/astrel/prince) , suction pipe (0.5"/1"/1.5"/2"/3") (suprime/astrel/prince) , swr pipe (2"/3/4")(suprime/astrel/prince) , swr bend (1"/2"/3"/4") (suprime/astrel/prince) , upvc tee (1"/1.25"/1.5"/2") (suprime/astrel/prince) , upvc socket (1"/1.25"/1.5"/2") (suprime/astrel/prince) , upvc elbow (1"/1.25"/1.5"/2") (suprime/astrel/prince) , upvc union (1"/1.25"/1.5"/2") (suprime/astrel/prince) , upvc mta (1"/1.25"/1.5"/2") (suprime/astrel/prince) , upvc fta (1"/1.25"/1.5"/2") (suprime/astrel/prince) , upvc valve (1"/1.25"/1.5"/2") (suprime/astrel/prince) , cpvc/upvc sulation 50ml/100ml/500ml (suprime/astrel/prince) , roll pipe (0.5"/1"/1.25") (suprime/astrel/prince) , roll pipe (1.5"/2") (suprime/astrel/prince) , brass valve (1"/1.25"/1.5"/2") (suprime/astrel/prince) , brass fta (1"/1.25"/1.5"/2") (suprime/astrel/prince) , brass mta (1"/1.25"/1.5"/2") (suprime/astrel/prince) , brass tee (1"/1.25"/1.5"/2") (suprime/astrel/prince) , brass socket (1"/1.25"/1.5"/2") (suprime/astrel/prince) , brass elbow (1"/1.25"/1.5"/2") (suprime/astrel/prince) , swr elbow (3/4") (suprime/astrel/prince) , swr socket (3"/4") (suprime/astrel/prince) , swr tee (3"/4") (suprime/astrel/prince) , upvc tank nipple (1"/1.25"/1.5"/2") (suprime/astrel/prince) , swr y 3/4" (suprime/astrel/prince) , diesel filter (10/15/20/30/160 kva) , air filter (10/15/20/30/160 kva) , mobil filter (10/15/20/30/160 kva) , air filter clamp (10/15/20/30/160 kva) , benzo bolt , returning valve , self starter motor , engine oil (7.5 ltr) , fuel pipe , nozzle return pipe , v-belt , relay (st

CTN :45432218

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For auction for the sale of unserviceable materials and scrap items lying at sectional stores - materials -spanner set, screw driver, pliers, die set , chain wrench , tablet plastic chair, pipe wrench ,pick axe, showel, hammer , chain pully , dismantle submersible motor, chain pully , wall clock,tool kit, pick axe,showel, centrifugal motor, pump 20hp, revolving chair,delex type,side arm high, revolving chair, delex type,pc metal chair 500 x 500, dismantled old cgi sheet,tool kit, shook proof mat, office chair with cushion, writing table (office), chair with arm with cution,computer table ,pick axe ,auto dummy level ,levelling staff, g.p.s no 450982 16d) , ph unit measurement meter, mophelo meter, conductivity meter,photo electric count meter,disilting water plant,furnance ,electric oval,magnetic starter, gas cylinder,cooker hawkins,lemon nichod,donga eagle, coat hanger, donga eagle,dustbin, pillow,pillow cover, towel set, hand towel, full plate chaina, rajai double , rajai cover, chader, plastic chair etc...

CTN :45404122

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

Teledyne Instrument Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector