Latest telephone line laying Tenders | Government telephone line laying Tenders

corporations/Associations/Others

CTN :45585969

23 Jun, 2026 52.06 Lacs

Sonipat - Haryana

Tender For supply, installation, testing and commissioning of lt underground cables with allied items for various buildings in dbranl university, rai, district sonipat. - hsr part[23.22.1.12]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.12. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. 4 pole mccb 300 to 400 amp , 50 ka [through rate], [23.22.1.13]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.13. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. 4 pole mccb 600 to 800 amp , 50 ka [through rate], [23.22.1.3]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.3. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. triple pole mccb 16 to 100 amp, 25 ka [through rate], [23.22.1.5]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 1.5. supply and erection of modular case circuit breaker single pole/4 pole on existing wall/pedestal/panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of the work. triple pole mccb 200 to 250 amp, 25 ka [through rate], [23.22.5.1]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.1. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 6 amp. to 32 amp single pole [through rate], [23.22.5.7]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.7. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 6 amp. to 32 amp mcbs four pole [through rate], [23.22.5.8]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 5.8. supply and erection of miniature circuit breaker 240/415 v in the existing distribution board including making necessary connections:- 40 amp to 63 amp. mcbs four pole [through rate], [23.22.8.4]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.4. sitc four pole on load manual change over switch in ss enclosure of following ratings 300 amp 415 volts [through rate], [23.22.8.5]mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.5. sitc four pole on load manual change over switch in ss enclosure of following ratings 400 amp 415 volts [through rate], [23.23.6.4]miscellaneous 6.4. supply and erection of ms cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of engineer-in charge of the work. ms perforated cable tray painted with powder coating 600 x 50 x 2 mm [through rate], [23.23.7.4]miscellaneous 7.4. supply and erection of cable tray cover made of 1.25 mm thick gi sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of engineer-in charge of the work. gi cable tray cover , suitable for cable tray of 600 x 50 x 2 mm [through rate], [23.24.1]ms stand, bus bar chamber and panels 1. supply and erection of m.s. angle iron frame duly welded for housing m.s. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of

CTN :45601424

29 Jun, 2026 NA

Gurgaon - Haryana

Tender For supply of indicator assy rh , indicator assy lh , tail light assy , speedo cable , wiper blade , wiper arm with blade , cable accelerator for rear , glass regulator , water foam level indicator , assy door handle outer , door handle inner , side indicator assy , indicator assy , wiper blade assy , digphragm front brake chamber , solenoid switch , brush holder assy with bushes , combination switch , door trim , carbon brush startor

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45587225

08 Jul, 2026 9.62 Lacs

Udhamsign Nagar - Uttarakhand

Tender For supply of supply, fabrication and construction of copper plate earthing details of electrodes and earth pit at akashvani jaspur, uttarakhand , providing of 50mm x 3mm copper strip and interconnecting earth electrodes with fabrication and fixing of 50mm x 3mm copper strip at akashvani jaspur, uttarakhand , providing and fixing of nomenclature sign marker for earth pits at akashvani jaspur, uttarakhand , providing of 25 mm x 3 mm copper strip for extension of earthing system up to the transmitter hall, ups and lt panel at akashvani jaspur, uttarakhand , copper strip laying for extension of earthing system up to the xtr hall, ups and lt panel and terminating in bus bar by digging the soil and placing the copper strip along the trenches at air jaspur , providing of 375x38x6mm copper bus bar with insulators and steel nut bolts and the fixing of 375x38x6mm copper bus bar is to be done to terminate the different earthing system at akashvani jaspur , making of trenches of size 700mm x 750mm for 185 sq mm 3.5 core starting from state electricity transformer to lt panel by digging the soil which includes cement concrete interlocking tiles , providing and grouting of 2 nos. of 4inch dia g.i. pipes of different length on the cement concrete flooring, road, and cement concrete interlocking tiles and along the vertical walls. , unwinding roll of 185 sq. mm 3.5core al. cable from their cable drum and laying the cable through the trenches and through the g.i. pipes as laid down at akashvani jaspur , reconstructing the cement concrete interlocking tiles floor and repairing the area with cement concrete interlocking tiles and finishing the surface at akashvani jaspur , providing and fixing of lt cable route marker made up of 2.5inch dia signage with 10mm x 2ft long ms rod from transformer to lt panel at akashvani jaspur , providing and fabricating of overhead shed for the installed 62.5kva dg set as per drawing at akashvani jaspur supply, fabrication and construction of copper plate earthing details of electrodes & earth pit as per given below: digging of pit of size: 1 mtr x 1 mtr x 3.5 mtr(d) providing of copper plate size 600 x 600 x 3mm. providing of copper strip of 50x3mm shall be extended from bottom of the earth pit to the surface of the earth pit, after joining the copper strip by copper rivets and proper brazing of strip to the copper plate. providing and fixing the 10ft. long 38 mm dia class c g.i pipe of reputed make such as surya, jindal or similar and fixing with the copper plate in the center with g.i/ ss nut bolts class c. one g.i. reducer at the top of the pipe is to be provided for fixing steel mesh for watering as shown in the drawing. placing the copper plate with pipe and strip into the pit. providing & filling of 2 nos. of bags of bentonite each of 50 kg. (for each earth pit.) providing & filling of 80kg charcoal, and 80kg raw salt in alternate 3 to 4 layers in each earth pit. the fresh soil about 2.0 cubic metre in earth pit size in layers is to be arrange to fill the pit for proper result. proper watering of the filled pit for initial charging of pits. providing of heavy duty c.i. cover with lifting hooks. construction of cc chamber in ratio 1:4:8 & fixing of heavy duty c.i. cover., providing of 50mm x 3mm copper strip and interconnecting earth electrodes with fabrication & fixing of 50mm x 3mm copper strip as per given below: i. 2 grid out of 6 pits for transmitter. ii. 1 grid out of 3 pits for audio. iii. power supply-3 pits separate (lt electrical panel, ups & isolation transformer, avr) iv. rf //bid details 2 / 25

CTN :45586837

27 Jun, 2026 NA

Siang - Arunachal Pradesh

Tender For supply of ic327238 kit lining std without spring lh , ic327241 ic332643 kit lining std without spring rh , ic307538 brake chamber 10bar , if300239 nut lock m 14x1 pt 5 center bolt fr , ic329594 main leaf front , ic336553 bush spring front , ic329595 second leaf front , ic307442 pin suspension front axle , ic331571 wear plate assy , ic361797 u bolt m 20 , mf140460 bolt m 10x1 pt 25x25 center bolt , ic334595 shackle assy front hcv , ic344700 self locknut m 20x1 pt 5 front u bolt , ic308918 pin front bucket front rear , ia303421 filter steering , ic343506 leaf no 01 , ic349022 centre bolt m 16x2 pt 0 rear , ic347970 wear plate assy rear , ic346222 flat u bolt rear , ic300102 nut u bolt 40 pt 40 , ic344591 bush shackle front suspension , ia302148 m 14x1 pt 5x40 bolt flange , ia207135 rear suspension hcv , ib003448 switch accelerator and clutch , id373843 id378028 fan clutch assy , id316980 assy fly wheel and ring gear 694 auto , id320478 draine valve assy , id320481 priming pump assy , id338072 v belt 8 pk 1620 , ie317552 head lamp 24 v , ie317553 head lamp 24 v , ie302810 tail lamp with intergrated registration pl , ie302811 tail lamp with intergrated registration pl , im301227 kit for clutch cover 395 , mh001411 bolt flange , id331491 clutch release bearing assy , id335068 25 pt 4 aluminium master cylinder , ic344385 dual brake valve voss type , id340382 fuel water separator , id328305 fuel filter spinon , id337141 id606434 combo oil filter , id341947 air filter primar , id341946 air cleaner filter s , ia304413 power steering pump , id204179 wipper motor 24 v , id340907 deaeration tank , ic309026 front slack adjuster , ia235461 auto slack adjuster lh , ia352781 streeing gear box , id334891 rocker cover seal , id309787 rear oil seal , id346458 assy auto tensioner , ie319165 bulb head lamp h4 24v 75 70w , id203934 bulb 10w 12 v , ie302355 oil pressure sensor , ie311424 egr diff pressure sensor , ie302732 air brake pressure sensor , ie317104 horn 24 v , ie312840 speed sensor , id208020 hydraulic oil filter , id332433 clutch booster 4 wabco , id304886 kit clutch booster rep kit , id305054 master cylinder repair major , id205380 oil seal gear box rear , id340863 cable shift , ia346802 tie rod end lh , ia339983 drag link threaded end assy , ia203458 oil seal hcv pinion , id301958 fuel strainer //bid details 2 / 50

CTN :45588072

27 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of bearing , inter bracket assy , ce bracket assy , brush elect contact set , generator assy , joint assy universal , bearing connecting rod , cable assy control , oil seal , bearing ball annular , spring brake chamber

CTN :45597259

27 Jun, 2026 1.00 Lacs

Gurdaspur - Punjab

Tender For supply of fuel feed pump , assy exhaust pipe , assy brake shoe with lining , exhust flap , master cyl rep kit , seal ring , rep kit spg chamber , rubber sleeve , piston seal , assy cable complete , brg tapper roller , repair kit air cylinder , gear lever kit , clutch release brg

CTN :45527688

22 Jun, 2026 30.0 Thousand

Jaisalmer - Rajasthan

Tender For supply of armature assembly , rep kit brake chamber type 24 , latch assy door rh , hand brake cable , assy front shock absorber gabriel , parts kit wind shield washer , clutch master cyl , maj rep kit air compressor , element oil filter , rubber hose

CTN :45566530

25 Jun, 2026 65.0 Thousand

Nagaon - Assam

Tender For supply of spark plug , oil filter , air filter , lens tail lamp , rear view mirror lh , rear view mirror rh , carburetor , accelerator cable , brake shoe rear , brake shoe frt , gasket rh , speedo cable , head gasket , oil seal , cam gear sub assembly exhaust , silencer assembly , assembly 240 dia cl disc , assembly 240 dia cl cover , assembly cl release bearing , assembly clutch slave cylinder , steering lock assembly , pulley , hose cabin lifting , isolator switch , rubber hose engine to radiator , assembly spring brake chamber

CTN :45542106

22 Jun, 2026 1.33 Lacs

Patiala - Punjab

Tender For providing fixing and installation of fire material for fire station mc patiala. est cost rs. 1.33 lacs dt 22/23.06.2026 - xlpeinsulatedarmouredcables (loose):supply, laying and erection of aluminium conductor xlpe insulated pvc sheathed armoured and served cable 1100 voltsgradeasper is7098 (part-1)1988 tobe laid loose intheexistingtrenchorpipeas per pwd general specifications overall size 35sq.mm (4core) armoured(loose), mccbs (for panels & sheetenclosure):supply and erection of moulded case circuit breaker (panel mounting cubical type) in the existing cubical panel (confirm to iec:60947-2) having ics=100% icu, 100% neutral with spreader terminal links,extendedrotary handle and relevant pwd general specificationscompletewithg.i. bolts, nuts &connection on both sides of mccb with suitable size of thimbles etc:mccbfourpole200amp.,415volts, 25ka fixed magnetic and adjustable thermal setting, sheet metal bus barchambers (copper strips):supply and erection of sheet metal bus bar chamber (factory fabricated) duly powder coated on existing surface with required 4 nos.of tin plated copper bus bar strips of suitable length and cross sectional area mounted on dmc/ smc mouldsat sufficient distance, enclosure made of m.s. sheet 1.6mm thick with hinged cover and lock, fitted with dust excluding gaskets and secured with sufficient no. of cadmiumplated iron screws and of given overall dimensions and to be fixed with g.i.bolts and nuts/ ragbolts and nuts etc. complete with all accessories including connections with suitable size of thimbles, bonding to the existing earth and painting etc. as desired by the engineer-in-charge at site:bus bar chamber 200amp., 415volts overall dimensions (455mm x 455mm x 150mm) nominal, supply and erection of heavy duty aluminium thimbles/lugs for cable endtermination duly crimped including making necessary connectionscompletely aluminium thimble cable core size 2535sq.mm, earthing with g.i.wire/ rope ing.i.pipe partly recessed and partly on surfacecomplete with 150 cm long 50mm dia.g.i. earthpipe (cutting threads and 36 nos. holes, 1cmdia. to makeamesh around the gi pipe) withg.i. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with20kg. charcoal & salt mixture etc., upto 8 metre in length (including boring & refilling). earthing with 8 s.w.g. (4mmdia.)g.i.wirein 15mm dia g.i. pipe with g.i. reducing socket 50mm x 15mm (upto 8metre in length), supply of mccb enclosure in all respects make lk/havells, supply of clump 1" g i, supply of screw 1.5"with gutty

Telephone Line Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others