Latest telescope stand Tenders | Government telescope stand Tenders

CTN :43590840

29 Jan, 2026 NA

Kharagpur - West Bengal

Tender For supply of hex. head bolt & nut - m20 x 50 mm, product grade 'c', m.s. black matl.& specn : is: 1363 (part - 1) / 2023 (6th rev.) or latest and is: 1363 (part - 3) / 2018 (5th rev.) or latest, property class4.6 for bolt and property class 5 for nut. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :43568192

19 Jan, 2026 NA

Bangalore - Karnataka

Tender For auction sale of disposal of scrap discarded tyres,disposal of scrap ms small drums,disposal of scrap ms drums scrap,disposal of scrap ms trussel bridge,disposal of scrap ms product pipelines,disposal of scrap ms hydrant lines,disposal of scrap brass pad locks,disposal of scrap plastic chairs

corporations/Associations/Others

CTN :43568582

27 Jan, 2026 NA

Lucknow - Uttar Pradesh

Tender For auction sale of metallic empty drum of additive,miscellaneous metallic scrap,old damaged cable,product hose pipe with end ms flange (rubber),ms metal scrap at mughalsarai ird

Central Government / Public Sector

CTN :43523595

20 Jan, 2026 NA

Bareilly - Uttar Pradesh

Tender For transportation of bulk petroleum product ms/hsd/branded fuels in top/bottom loading tank trucks ex aonla depot

CTN :43535075

17 Jan, 2026 NA

Kharagpur - West Bengal

Tender For supply of hex. head bolt and nut, m12 x 50 mm, product grade 'c', m.s.,black matl.& specn : is: 1 363 (part - 1) / 2023 (6th rev.) or latest and is: 1363 (part - 3) / 2018 (5th. rev.) or latest, property class 4.6 for bolt and property class 5 for nut. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :42975278

19 Jan, 2026 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For corrigendum : purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

CTN :43463693

21 Jan, 2026 4.64 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- thanniyam stadium in kallara grama panchayath in vamanapuram lac, thiruvananthapuram- supply and installation of outdoor gym and sports equipment - outdoor gym equipments, od252260/2025-2026 : horse rider - supply and installation of horse rider having the following specifications:dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundationplate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon /hdpe material. remaining frame is made by 48 mm od ?b? class gi pipe. seat frame ?is made by 48mm od ?b? class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od ?b? class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od ?b? class gi pipe. paddle vertical support - 60 mm od ?b? class gi pipe. handle frame- 42 mm od ?b? class gi pipe dually bending design. foot pipe - 33 mm od ?b? class gi pipe. support frame ? 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe.bearing bush closing cap ? pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft.foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand.bearing bushes - 60mm od seamless pipe. pin ? made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips ? a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252261/2025-2026 : back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od ?b?class g.i. pipe. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od ?b? g.i pipe. seat rest pipe ? 42 mm od ?b? class g.i pipe. handle pipe ? 33 mm od ?b? class g.i pipe.footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 3 mm thick used to support it. footrest pipe ? 42 mm od ?b? class g.i pipe and 80 x 40 mm ms rectangular pipe. closing cap ?pp / nylon / hdpe material. seat ? 360 x 300 x 2 mm thick m.s. seat with corner fillet for safety. grips - high quality rubber 46 mm od. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od252262/2025-2026 : cross trainer (double) - supply and installation of double cross trainer having the following specifications: dimensions: (l x w x h) 2280 x 550 x 1650 mm. main frame- made of 88 mm od ?b? class gi pipe dually bending design. foundation plate ? m.s. round plate of 250 mm & 8 mm thick. paddle vertical support - 42 mm od ?b? class gi pipe. handle - 33 mm od ?b?class gi pipe dually bending design. leg movement frame ? 50 mm x 50 mm x 2 mm thick square pipe. footrest - cast iron 124 x296 x 5 mm thick and m.s. plat

Central Government / Public Sector

CTN :43206410

17 Jan, 2026 NA

Kandla - Gujarat

Tender For corrigendum : transportation of bulk petroleum product ms/hsd/branded fuels in top loading tank trucks ex kandla foreshore terminal (kfst)

CTN :43460735

27 Jan, 2026 16.44 Lacs

Multi City - Multi State

Tender For procurement of cat b stores - emery paper 0, emery paper 40, emery paper 60, emery paper 100, car perfume gel air bottle (50 mi), dash board perfume, fog light assy, 12 volt-20pcs & 24 volt- 40 pcs, tyre polish (250 gms), body polish (500 gms), fog lamp bulb 24 v 90 wt, halogen bulb 24 v 100 wt, head light bulb 24 v double filament 100/60 wt, tail lamp lhs & rhs for tata veh, bulb 12 v, 21 w, bulb 24 v, 21 w, ms welding electrode 2.5mm * 350 make esab consisting of 190 pcs per pkt, ms welding electrode 3.15mm * 450 mm make esab consisting of 130 pcs per pkt, ms welding electrode 4 * 450 mm make esab consisting of 85 pcs per pkt, eutatic rod 680 size 4 mm make castolin (machinable) 5 kg per pkt, cast iron rod (no. 224) machinable (3.15 mm) (esab), hard facing welding rod 4mm,, make: esab/ador, hard facing welding rod 3.15mm make: esab, brazing rod copper coated (1/16"/ 1/8") for gas welding, glass for welding screen white, glass for welding screen black, cutting nozzle 1 /32^ prime prime make: esab, cutting nozzle 3 /64^ prime prime make: esab, gun metal rod 40mm 6mm * 2' long, welding heavy duty hand gloves make esab product no., 2001005001 long size (tsin-t017008661) wire brush 8 "*3", welding goggle, gas sparker, clamp hose 1 /2^ prime prime, arc welding holder 600 amps esab, resinoid cutting off wheels for metals 355 * 2.8 * 5.4mm, cutting wheel 180 * 3 * 22 / 23 mm, cutting wheel 180 * 3 * 16ml, cutting/grinding wheel 100 * 6 * 16mm, ballpin hammer 1.5 kg, popet rivet, drill bit set 01 mm to 12 mm, eutatic rod 680 size 4 mm make castolin (machinable) 5 kg per pkt, tips grinding wheel 100mm bore 20mm, benjo bolt 13 mm, benjo bolt 17 mm, benjo bolt 10 mm, benjo bolt 19 mm, benjo bolt 22 mm, feed pump valve (pkt of 100 nos), ready made canopy for tata 407, ready made canopy for tata 207, m seal 100gm, bolt with nuts 16mm length 50mm pitch 1.50, bolt with nuts 12mm x 50mm length 1.75 pitch, split pin gl 2mm thick x 1-1/2^ prime prime (pkt of 100 nos), packing paper 18 ^ prime prime *36^ prime prime *0.02 mm, soldring wire (100 gm pkt), anna bond liquid gasket rubber based paste 100 gm per tube, feviquick tube 2gm, grinding wheel 200 mm x 25 mm thick make carborundum, wheel for hand grinder 6", wheel for hand grinder 4", benjo bolt 21 mm, benjo bolt 19 mm, benjo bolt 14 mm, bolt with nut size 6 mm x 25 mm make tvs, bolt with nut size 6mm * 50 mm make tvs, bolt with nut size 10mm * 50 mm make tvs, bolt with nut size 13mm * 50 | mm make tvs, bolt with nut size 15mm * 50 mm make tvs, bolt with nut size 17mm * 50 mm make tvs, bolt with nut size 19mm * 50 mm make tvs, bolt with nut size 21 mm x 50 mm make tvs, spring washer 10 mm, spring washer 13 mm, spring washer 17/18 mm, spring washer 19/20 mm, spring washer 22 mm, spring washer 27 mm, spring washer 30 mm, plane washer 10 mm, plane washer 13 mm, plane washer 17 mm., plane washer 19/20 mm, plane washer 22 mm, plane washer 27/28 mm, plane washer 30/32 mm, limpet washer, ms sheet 8' * 4' * 3' mm, ms sheet 8' * 4' * 4' mm, ms sheet 8' * 4' * 8' mm, ms sheet 8' * 4' * 10mn, ms sheet 8' * 4' * 12mm, ms sheet 8' * 4' * 14 mm, propeller shaft bolt with self locking nut for tata 407 size: 17mm x 35mm, propeller shaft bolt with self locking nut for ashok leyand size: 21mm x 50mm, propeller shaft bolt with self locking nut for ashok leyand size: 15mm x 50mm, tyre vulcanising solution 1/2 itr pack, revolving light for ambulance, siren for ambulance, toggle switch 2 pole, toggle switch 3 pole, toggle switch 4 pole, m 18x35mm (with nut), full length coarse thread, m 20 x 30 mm (with nut), full length coarse thread, m 22 x 40mm (with nut), full length coarse thread, m 24 x 40mm (with nut), full length coarse thread, m 27 x 50mm (with nut), full length coarse thread, plain washer for m 18 bolt, plain washer for m 20 bolt, plain washer for m 22 bolt, plain washer for m 24 bolt, plain washer for m 27 bolt, spring washer for m18 bolt, spring washer for m 20 bolt, spring washer for m 22 bol

CTN :43452150

19 Jan, 2026 NA

Bathinda - Punjab

Tender For supply of supply of trailer and structure septic tank and door flooring and ventilator etc of size and specification as mentioned in product of specification and store list attached at bathinda , supply of plumbing items sentary fitting etc as mentioned in product specification and store list attached at bathinda , supply of detachable ms steps etc of size and specification as mentioned in product of specification and store list attached at bathinda , supply of painting items as mentioned in product specification and store list attached at bathinda , supply of electric connections items as mentioned in product specification and store list attached at bathinda

Telescope Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government / Public Sector

State Government

Central Government / Public Sector