Latest telescopic cover Tenders | Government telescopic cover Tenders

CTN :45337007

06 Jul, 2026 NA

Patiala - Punjab

Tender For supply of battery box complete & general arrangement of battery box assembly (finished product of stainless steel) to clw specn. no. clw/ms/3/037 alt.-10 with annexure-a consisting of (1) battery box complete & general arrangement of battery box assemblyto clw drg. no. 1209-06.138-001 alt. 8, 1209-06.138-002 alt. 1, (2) section & detail of battery box arrangement to clw drg no. 1209-06-138-002 alt. 1 (3) provision of additional holes as per joint note dated 11.06.24 and str no. clw/2015/eldo/m/str/56 rev. 0 with annexure i,ii,iii & iv. [ warranty period: 240 months after the date of delivery ] ]

CTN :45328987

08 Jun, 2026 NA

Sealdah - West Bengal

Tender For - repairing of damaged electrical items and supply of different electrical maintenance materials at 44 iron side road rhe. - repair of existing damaged led tube light / led mirror light/ led cove light/ led surface mount+ down lighter light with necessary driver should matching with existing specification (t5 output_ 18w 20w, 240ma)i) driver only, ii) led strip only, supply of 4ft long led smart bright tube light fitting with led tube light .(make: philips-type: bn 021 led40s- 6500 psu gr (4 ft) or equivalent model of crompton/jaquar)., supply of single fancy wall bracket led light fitting (make - philips, model no-31453 or equivalent model of crompton/jaquar) incl. 1nos 9 w led lamp (make:-philips or equivalent model of crompton/jaquar). of warm white colour lamp complete with all accessories, supply of 15 watt led surface mount+ down lighter light fittings including all accessories and mountings complete set as per direction of eic(make- crompton, type-lcdspln-r-15-cdl/ philips/ jaquar), supply of led 7.5 watt mirror light fittings complete with lamp including & all other accessories (make :philips:type jojoba wall light, model no. 34034/14/86 or equivalent model of crompton/jaquar)], fixing of 3 module 2w, 3000k led foot light fittings. incl. s/f 3 module ms flush box in wall as per approval of eic/authority., supply of single led light 12w, 1200 lm, 10,000 life hours, cdl led lamp ( make : philips / crompton / jaquar ), supply of modular soket type 2 module regulator (brand approved by eic), supply of step type electronics fan regulator (brand approved by eic), supply & fixing 1200 mm ceiling fan(max 60w) complete with all accessories, down-rod etc. (except regulator) [make:orient new air plus/crompton/usha striker plus /havells (cat no-fhcss1sbrn48)/ as per approval of eic.], supply of 450 mm sweep cabin fan (make:orient tornado wall ii or equivalent model of cg/havells/other brand as per approval of eic/authority] on wall by s&f rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd., supply of 09 sweep a.c. exaust fan metal body with all parts.make-epc, type-p23009/4(make : havells / orient / epc), supply of 200 mm sweep, modular exhaust fan (max 32w) complete with all accessories, [make:havells ventil/crompton/usha / as per approval of eic.], supply of 10ltr geyser having storage ; capacity: 10 litres; wattage: 2000 watts; pressure: 8 bars ; bee rating: 5 star; waterproof degree : ipx-4 protection for longer product life. adjustable knob for temperature settings between 25 degree c to 75 degree c to get the desired temperature, multi-function safety valve which protects tank from internal and external pressure build up including hot & cold water distribution pipe line. warranty- 2yearsmake:- havells(type- monza)/ venus/ v-guard, supplying of 1.1 kv single core stranded fr 2.5 sqr mm pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) 100 mtr coil, supplying of 240v 6-16a sp mcb of breaking capacity 10ka & c characteristics (make: l&k / legrand / crabtree), supplying of 240v 40a dp mcb isolator(make: l&k / legrand / crabtree), supplying of 240v 63a fp mcb isolator(make: l&k / legrand / crabtree), supplying of 2.5 mfd condenser (tibcon), add. g.s.t.@ 18% (on total from item no 1 to 20) to be calculated by bidder, add. lwc.@ 1% to be calculated (on total from item no 1 to 20 + gst@18%) by bidder

CTN :45332534

10 Jun, 2026 NA

Satna - Madhya Pradesh

Tender For supply of raw material - white board marker , cleaning liquid 50ml , photo copy paper a4 , rj 45 connector , mouse usb product , keyboard usb product , cat 6 cable 305meter , stapler 10no small , remote battery aaa , battery clock aa , cd , dvd , usb- hub bus , vga cable 1 to 2 , curtains , m.s.flat 50x12mm , m.s.flat 100x10mm , m.s.flat 50x8mm , m.s. electrode 2.5mm , m.s sheet 3 x 8 x 2.5mm , m.s sheet 4 x 8 x 3mm , welding machine output copper leads 35mm , pvc gang box 4x8 modular , pvc gang box 4x10 modular , multistandard copper wire 4mm , bar magnet , carbon resitor 01 k , diode 1n 4007 , mcb 63amp tpn with box , steel screw 15mm 100nos , pvc rawal plug 3.5mm , wooden screw 75mm 100nos , pvc cable clip 6mm , pvc cable clip 10mm , pvc cable clip 20mm , 4 core 2.5mm armoured cable , pvc casing caping 1 inch 6ft length , sand paper zero number , led bulb 18w , solar torch , seek jadhu , table cloth size 5x3 , kachra bag , register 2 quire , register 4 quire , chalk white , duster , stepler 24x6 big , marker ink 15 ml , bill register , batten holder 05 amp , angle holder 05 amp , pendent holder 05 amp , pvc aluminium wire 2.5 mm single strand , kit - kat fuse 100a , winding wire copper 32 swg , winding wire copper 35 swg , winding wire copper 36 swg , cotton winding tape , winding sleev umpire 01 no , winding sleev umpire 02 no , winding sleev umpire 03 no , winding sleev umpire 04 no , winding sleev umpire 05 no , sand paper 00 to 01 no , winding paper millinex paper , lock 55mm , coolent , gardening pipe 1inch , saddle patti , metal mcb channel patti , pvc clip 6mm , pvc flexible coper wire 4mm , pvc flexible coper wire 1.5mm , screw 4inch , soldering iron 65watt , upvc pipe 3x4inch , upvc elbow 3x4inch , upvc tee 3x4inch , upvc solvent 200grm , taflon tape , pvc clamp pipe 3x4inch , upvc union 3x4inch , upvc socket adapter 3x4inch , upvc reducing adapter 1inch to 3x4inch , upvc brass elbow 3x4inch to 1x2inch , upvc ball valve 3x4inch , upvc tank adapter 3x4inch , steel tap 1x2inch , water tank 2000lit 6 layer , water tank 1000lit 6layer , upvc pipe 1inch , upvc elbow 1inch , upvc tee 1inch , upvc socket adapter 1inch , upvc union 1inch , pvc clamp pipe 1inch , upvc tank adapter 1inch , upvc ball valve 1inch , white board 4x6 , casing patti 2inch , big bucket , wooden beat 3x4inch half round , nails 1inch , ms round bar 30mm , ms round bar 40mm , ms round bar 45mm , ms round bar 50mm , ms round bar 60mm , ms round bar 65mm , mobile oil 40no. , cutting oil , power saw blade 1inxh x 14inch , hand hacksaw blade 1x2x12inch , emery paper 80no. , emery paper 100no. , wire bursh 4inch , chalk clolour , grease , file card , engine oil , service cable 3 core 4mm flat , weight machine 500kg. platform size 2x2 , ladder 20ft foldable type , router 4g lte wireless dongle , switch 8 port 1000mbps gigabit

CTN :45337559

01 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of hex. head bolt & nut - m20 x 65 mm, product grade 'c',m.s. black matl.& specn : is: 1363 (part - 1) / 2023 (6th rev.) or latest and is: 1363 (part - 3) / 2018 (5th rev.) or latest, property class 4.6 for bolt and property class 5 for nut. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45318338

04 Jun, 2026 NA

Delhi - Delhi

Tender For supply of desktops , 02 nos x 1 kva ups with internal batteries for 10- 15 minutes backup time, for 02 nos desktops for hsl delhi office , ms office 2024 or latest perpetual license , installation and product activation of the operating system and office software , warranty from the oem for each desktop for 05 years , buy back cost for the older desktops to be quoted running windows 10 or 7 - without secondary storage drives. cost to be indicated separately.

Central Government/Public Sector

CTN :45338167

16 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of gel for bogie cleaning as per technical specification given below: 1) appearance - pink gel 2) density (25 degreec) - 1.0 g/ml 3) ph (25 degree c) - 9.8 4) conductivity (25 degree c) - 4.9 ms/cm 5) the biodegradability test standard should be as per oecd* guideline 302b. (note: 1 no = approx. 30 kgs. container.) make: dst-gel/2 or similar. note: 1) firm shall specify the product name and model no./catalogue in their offer, otherwise offer will not be considered 2) firm shall comply all thedetails about the technical specification in the tender. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45338169

16 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of floor cleaner as per technical specification given below: 1) appearance - clear, slightly yellow 2) density (25 degree c) - 1.06 g/ml 3) ph (25 degree c) - 9.6 4) conductivity (25 degree c) - 24.8 ms/cm 5) the biodegradability test standard should be as per oecd* guideline 302b.( note: 1 no= approx. 30 kgs) make: dst-chemicals or similar. note: 1) firm shall specify the product name and model no./catalogue in their offer. otherwise offer will not be considered 2) firm shall comply all the details about the technical specification in the tender. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45338173

16 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of multipurpose cleaning gel for loco washing as per technical specification given below: 1) appearance - clear, slightly yellow 2) density (25 degree c) - 1.1 g/ml 3) ph (25 degree c) - 9.7 4) conductivity (25degree c) - 52.5 ms/cm 5) the biodegradability test standard should be as per oecd* guideline 302b. (note: 1 no= approx. 30 kgs. container) make/model: dst-degreez/9 or similar. note: 1) firm shall specify the product name and model no./catalogue in their offer, otherwise offerwill not be considered 2) firm shall comply all the details about the technical specification in the tender. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

State Government

CTN :45264382

30 May, 2026 68.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply and installation of furniture for boys hostel - iii at nliu, bhopal - supply of furniture, providing steel almirah mirror having overall size 910w(+ 05mm) x 500d(+ 05mm) x 1980 (+ 05mm) h , top , bottom , side panel made up of 1mm thick crca sheet powder coated , legs or pedistal and shelves made up of 1.2mm thick crca sheet powder coated and height of thelegs or pedistal should be 130 mm(+ 05mm), shutter made up of 1mm thick crca sheet powder coated , no sharp edges of almirah ends, all shelve rack divided into equal parts , door die cast chrome plated handles fitted with washer & double nut , handles ring made of pvc cap , almirah all metallic panels screw with nut & bolt, metal pipe & 07 tank treatment with minimum 50 micron powder coating. shelving height-wise adjustable shelf mounting: uniformly distributed load capacity per each full shelf is 40 kg maximum. three horizontal shelf partitions are provided made of 1.2 mm crca steel top shelf clear space height from bottom is 1050 mm and second shelf height from bottom is 700 mm and third shelf height 350 mm; 1mm crca sheet fitted with heavy duty 25mm. hanging rod 02 nos. 25mm dia med guage ss capsule pipe is provided on the top in the centre. locking & handle - s.s. handle with 2 way locking mechanism with shooting rod/bolt arrangement. 5mm tk plain mirror (make-modi, asahi, saint gobain) of size 400 mm x 1200 mm is to be provided on one flap fixed with the help of m.s. clips/beading as per approval. whole steel structure is epoxy powder coated to the thickness of 50 microns in approved shade/color and texture. the work includes all required m.s. hinges, handle, lock, bolts and hardware of good and approved quality etc. compete. this job includes all installation, material & labor etc. complete and nothing will be paid extra for execution/installation of the item. items should have 5-year warranty., providing hostel bed overall size 1980w(+ 10mm) x 960d(+ 10mm) x 810h(+ 10mm), hostel bed made of prime quality round metal pipe of size 38mm dia 1.2mm & 50x25mm thick crca rectangular pipe 1.2mm thick, head rest designed with 38mm dia with 25mm round support pipes for supporting pillow having height of 810mm, bed mattress structure made from 50x25x 1.2 mm & 25x25x1.2 mm pipes, mattress support panel made of 12mm thick isi/bis grade bwp plywood, mattress panel height from floor should be of 450mm, four number of supports of size 25x25x1.2mm are given to mattress panel, additional 25x25x3mm angle used under ply along with headboard & footboard having length of 100 mm of each, the complete structure should be in knockdown construction and assembled with nut & bolts, all open edges of pipes should be covered by good quality ppcp shoes/caps, . all metal components should be pre-treated with zinc phosphating in minimum 07 tank process and then powder coated with epoxy polyester with approved shade, thickness of coating should be minimum 50 micron. .items should have 5 year warranty., providing study table overall size 900w(+ 05mm) x 600d (+ 05mm)x 750h(+ 05mm) , table top made up of 16mm thick bwp termite proof ply wood , 0.8mm mica on top and 0.6 mm balancing mica on bottom isi/bis standard as applicable for the product with 2mm thick pvc edge bending , understructure made of crca 40x40x1.2mm square metal pipe duly powder coated, understructure crca square metal pipe 40x40mm x 1.2mm thick made in knockdown condition, table provided with one side storage single drawers fixed pedestal with depth of 575mm(+/- 05mm) ,storage should be of size 300 mm (w) and 120 (h). the storage support ms pipe25x25x1.mm . storages made of 1.2mm thick crca metal sheet duly powder coated , all opend ends closed with ppcp caps & shoes, all metal parts shall be welded properly strongly and conformity with regulations, the table structure should be in knockdown condition, all metal components should be pre-treated with zinc phosphating in minimum 11 tank process

Telescopic Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government