Latest telescopic handler Tenders | Government telescopic handler Tenders

Corporations And Associations And Others

CTN :40133906

02 May, 2025 NA

Panipat - Haryana

Tender For rate contract of cane unloader hydraulic pumps and spares - hydraulic pumpp1m-045-d-00260 lpmmax pressure- 210 barmake- parkerwith all necessary fitting and other required equipment s.fitting of pumps at site is also in the scope of bidder., first motion worm shaft for cane unloader lt gear box (detail of gear box mentioned below):detail of gear box:jr150/6ratio: 48:1rpm- 960hr 400, make: niles, returnable oil fiter, make-parker hydraulic filter division metamora, ohio usa 43450, part no.-92616910c,numerode pieza-k- 23018, numer de piece-fa57-10, air line filter hydrauline s/e 20-25 u for cane unloader, suction oil filter sc-3-50 for hydraulic, cane unloader hydraulic cylinder repair kit 50x80, rubber hose pipe for hydraulic cylinder , make polyhose, wp-259 bar, 3750psi) id-3/4 , 9-12, hydraulic cylinder for cane unloader garb suitable for uttam make (both side usable), strainer for cane unloader grab tank, code:sc3-050, make: hydroline, solenoid valve (sov) model code: dg4v5 8cj.v.mu.h6.20rated pressure: pa&b:315 bar(4568 psi), t-120 bar, make: etn vickers, hydex coupling no-48, make--hydex, hydex coupling no-48 sleeve, make- hydex, cane unloader lt bridge wheel, cane unloader ct bridge wheel, cane unloader lt gear boxref no. jr150/2, type: hr400, rating: 48:1, speed:960, make: niles engineering, first motion worm shaft for cane unloader lt gear boxref no. jr150/2, type: hr400, rating: 48:1, speed:960, make: niles engineering, cane unloader ct gear boxref no. jr150/8, type: vc475, rating: 42:1, speed:960, make: niles engineering, first motion worm shaft for cane unloader ct gear boxref no. jr150/8, type: vc475, rating: 42:1, speed:960, make: niles engineering, cane unloader grab gear boxref no.jr118/5, type: hr500, rating: 20.5:1, speed:960, make: niles engineering, first motion worm shaft for cane unloader grab gear boxref no.jr118/5, type: hr500, rating: 20.5:1, speed:960, make: niles engineering, steel wire rope, (6x36) core, 3/4 dia, thk-20mm, make-usha martin, break linner, width size: 140mm x 12mmmake- hcl, hydraulic hose pipe suitable for 5800 psi with hydraulic fittings, wire breaded rubber hose pipe, size: 4 x 14 , wire breaded rubber hose pipe, size: 8 x 14 , rubber hose pipe flexible 2 at-ai-4 (dn6), hi-impluse, din en 853-2sn, size-1/4 with hex nipple, working pressure-400 bar, length-1000mm, double steel wire braided flexible hose pipe end connection, 2000mm long for esp pneumatic conveying line

CTN :40143846

09 Jun, 2025 NA

Bardhaman - West Bengal

Tender For supply of telescopic handler (q2)

Corporations And Associations And Others

CTN :40117872

06 May, 2025 NA

Kaithal - Haryana

Tender For tender for supply of spares for cane unloader trolley - supply of spares for cane un loader trolley make-kowa sales, hydraulic pump k3 vl-80 for cane un loader trolley sr. no. 00675198 , suction filter, return line filter, air breather filter

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

Co-operative

CTN :40120376

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of rubber goods - siliconized butyle rubber sheet for vapour valve of pan 438x180x19 mm thick, j.p.cd 385 of 6 holes of 12mm, drg.no. bh-115 shore hardness (+100) sl.no.1, sl.no.2, sl.no.3, siliconized butyle rubber seat for pan discharge valve drg.no. bh-2b, siliconized butyle rubber seat for steam/angle valve drg.no. bh-22/95, 200 deg c size-24", 28", 30", 32", 36", 40", 42", 44", 5", siliconized butyle rubber seat for juice weighing scale with stand upto 80 dig.cent.temp.drg.no-bh-92(r-2) shore hardness (+100), siliconized butyle rubber seat for water weighingscale suitable upto 90 c size 14" shore hardness (+100), tapper rubber plug to plug for brass tube of quad 42mm as per drg.bh-190, for pan tube id 98mm & od 100mm, neoprim rubber sheet for double beat valve drg.no-bh-3 with stand upto 110 deg.c shore hardness (+90) size- 5", size- 6", size- 8", rubber buffer for taxmaco c/f machine as per drg bh-6 shore hardness (+90), neoprim rubber seat for telescopic valve tested 150 c drg.no. clr-3 sl. no. 1, shore hardness (+90) sl. no. 2, neoprim rubber strip for nk 1100 c/f machine size- 2" shore hardness (+90), size- 2.5", rubber gutka for cane unloader 75x50x30 mm, rubber seat for butter fly valve as per drg. bh-170 shore hardness (+90) item no-1, item no-2, butyle rubber sheet for c/f machine d-412 as per drg.no- bh-174 shore hardness (+100), neoprim rubber mud seal with stand upto 110 c as per drg.no. clr-35 shore hardness (+90), rubber bucket for air cylinder of batch type machine as per drg.no bh-148 item no-1, item no-2, item no-3, item no-4, item no-5, item no-6, rubber bucket for syrup seperator cylinder, railway pattern vaccum hose pipe 2" x 18", rubber bucket for d-412 c/f machine air cylinder as per drg/ sample size -5", size -6", neoprime rubber joint sheet shore hardness (+90)with stand upto 110 c size 1/16", 1/8", 1/4", 5/8", 3/4" etc., rubber sheet for vapour cell main hole as per drg. bh-201, rubber cord 6mm & 7mm q, 8mm q, 9mm q, rubber seat for main hole size 410mm x 460mm x 20mm, sealing ring id 100 q od 122 q as per drg.no. bh-128, neoprime rubber hydraulic bucket for kcp mill as per drg.no. mh-62 rubber hardness + 90 to 95 s.n.1, rubber cone for boiler gauge glass 3/4"(19mm), teflon seat for pneumatic valve of c/f as per drg.no. bh-22 98 item no-1, item no-2, neoprime rubber strip tested 150 c 12x12mm, 15x12mm, 15x15mm, 18x18mm, rubber o ring for kcp mill hydraulic cap, molasses belt seat for c/f machine, rubber sheet for pan discharge valve d.b.pad drg.no.bh-114 shore hardness (+90), rubber driving coupling seat for new sugar grader as per drg. bh-168 rubber hardness 80/85, rubber diaphram for vac. filter equalising valve as per drg. clr-23, rubber bucket for c/f machine as per drg. bh-165sl.no-1, sl.no-2, sl.no-3, sl.no-4, sl.no-5, sl.no-6, sl.no-7, sl.no-8, sl.no-9, sl.no-10, rubber coupling as per drg.no. bh-170 ( r )sl.no-1, sl.no-2, rubber squizer for door 1/2"x4"x16", 1/2"x4"x24", 1/2"x4"x30", 1/2"x4"x32.5", 1/2"x4"x36", rubber bucket for c/f machine as per drg. bh-173size 76mm x 70mm x 16mm with 3mm m.s.plate, rubber hose pipe 200psi, best quality1/2", 3/4", 1", 1.25", wire impregated high pressure rubber hose pipe, best quality 300psi 1/4", 1/2", 3/4", 1", 1 1/4", cylinder bucket for angle valve as per drg.no. bh-36 sl.no.1, rubber bucket for c/f machine as per drg. bh-170 sl.no.1, sl.no.2, sl.no.3, sl.no.4, rubber diaphram 4" for c/f machine as per drg.no. bh-130, dholak type (brass line) rubber bush for kcp/texmaco mill size 110x110x57, 65x55x28, 138x132x60, 138x128x60, 110x132x55, metallic rubber bush (brass linned)2 1/2"x2 1/2"x1 1/8", 55x60x25, 57x64x29, 67x50x25, 54x28x67, 50x62x25, 30x16x13, 63x25x50, 132x55x110, 19x30x30, 10x21x25, 30x65x75, 5/8"x1"x1", 5/8"x2"x2", 3/4"x1 1/2"x1 1/2", 1"x1"x3/8", 1/2"x1 1/4"x1 1/4", 3/4"x1 1/4"x1 1/4", 5/8"x1 1/4"x1 1/4", 3/8"x3/4"x1", 1/2"x1"x1", 5/8"x1.5x1.5", 5/8"x1 1/4"x1 1/2", 3/4"x2"x2", 1 1/8"x2 1/2"x3", 2"x2"x7/8", 1/2"x1 1/2"x1 1/2",

Co-operative

CTN :40120379

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c i item on conversion supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), chief engineer

Co-operative

CTN :40102168

29 Apr, 2025 2.50 Lacs

Bareilly - Uttar Pradesh

Tender For supply of hydraulic grab capacity 5 ton and supply and commisioning of cane unloader bridge for season 2025-2026

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

Telescopic Handler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Corporations And Associations And Others

Co-operative

Co-operative

Co-operative

Co-operative