Latest temp indicator Tenders | Government temp indicator Tenders

CTN :40065164

09 May, 2025 NA

Barmer - Rajasthan

Tender For supply of installation of pressure gauge in cs,installation of pressure gauge in as,installation of pressure transmit in cs,installation of pressure transmit in as,installation of flow transmit in cs,installation of flow transmit in as,installation of level transmit in cs,installation of level gauges in cs,installation of thermocouple,installation of temp indicators,installation of temp transmitters,intalllation of 2 inch yoke supports,intalllation of 3 inch yoke supports,supply and inst of ss tag plates,stenciling of 1 inch letter,stenciling of 2 inch letter,loop checking for pt,loop checking for ft,loop checking for tt,loop checking for lt,loop checking for cv,installation of junction box,laying of 1 pair cable,laying of 12 pair cable,laying of power cable,laying and term of earthing cable,laying of fiber optics cable,termination of optical fiber cable,erection of frp duct 1200 mm w,erection of frp duct 400 mm w,erection of frp trays 300 mm w,erection of frp trays 150 mm w,erection of frp trays 60 mm w,erection of ca

State Government

CTN :40044754

23 Apr, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

State Government

CTN :40045356

23 Apr, 2025 1.00 Lacs

Shivpuri - Madhya Pradesh

Tender For oti (oil temperature indicator ) any standard make wti (winding temperature indicator ) any standard make

corporations/Associations/Others

CTN :39993468

21 Apr, 2025 NA

Bankura - West Bengal

Tender For supply of winding temperature indicator, make-precimeasure controls pvt. ltd. , model: -1005a, range-30-150degree , oil temperature indicator, make-precimeasure controls pvt. ltd. , model: - 1005a range-20-140degree c

Central Government/Public Sector

CTN :39822931

15 Apr, 2025 NA

Bengaluru - Karnataka

Tender For corrigendum : supply and installation of kitchen equipments for hostel mess at indian institute of science, bengaluru - dry store, ss platform digital weighing scale.ss platform of size 600 x 600mm, power supply - 230v ac, 50 hz, display colour/digit - red/ green/ 6 digits, display size - 0.56" (14.22 mm), number of keys - 5 keys, battery - 6v / 4ah,, mobile ingredient bin mobile ingredient bin with slant top, sliding lid, castors & scoop.37 gal. (140 l) slant top, with scoop, a hygienic clear sliding lid, bins should made of nsf-listed, fda-accepted material, bins has to be designed with a slanted top to easily access product., ss low height platform rack (dunnage rack).38 x 38mm pipe frame structure, 38 x 38mm pipe cross support with a spacing of 70mm, 6 nos leg of 38mm sq. ss legs fitted with adjustable nylon bullet feet., ss storage rack with 4 shelves.18swg ss shelves double beaded on all sides, reinforced with 25 x 100 x 25mm hat channels, dia 38mm ss round legs fitted with adjustable nylon bullet feet., walk in cooler, walk-in cooler, +2 deg c to +8 deg c.unit should be made from 60 mm thick prefab rigid puf sandwich panels with 1mm thick ss 304 grade sheet outside and inside, the cold room should be with ceiling and wall panels interlocked through a cam lock mechanism, fitted with a hermetic sealed compressor. the condensing unit should be split type, which is air cooled. swing type and insulated door having magnetic gasket, safety latch, lock and heavy duty hinges. the room should maintain a temperature of +2 c to +8 c. all accessories like light, light switch, emergency switch, door heater, vacuum release, temperature indicator to be provided with the unit. the refrigerant used should be r 134a. flooring inside the cold room is kottah stone flooring (flooring in client scope)., perforated storage rack with 4 shelves.16swg ss shelves double beaded on all sides with perforation in entire length and width, 50 x 5 mm perforation with a spacing of 15mm, stiffed with 25 x 100 x 25mm hat channels, 38mm ss round legs fitted with adjustable nylon bullet feet., veg prep area, ss work table with 2 sink unit & 1 u/s.16swg ss sunken top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 2 nos sink of size 450 x 450 x 300mm deep, radius corners, fitted with 38mm waste coupling, 150mm splash guard on rear and (left/right) sides, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., mixer faucet, single hole, deck mount mixing faucet.single hole deck mount mixing faucet with polished chrome plated brass body, 10 1/8" swing nozzle with full flow laminar flow device, quarter-turn ceramic cartridges, lever handles, 18" flexible stainless steel supply hoses with 1/2" npsm / 5/8" o.d. compression connections. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., single hole single temperature deck mount faucet for ro watersingle hole single temperature deck mount faucet with polished chrome plated brass body, 5 7/8" swivel gooseneck, 2.2 gpm aerator, ceramic cartridge, lever handle and 1/2" npsm male inlet. certified to asme a112.18.1\csa b125.1, nsf 61-section 9 and nsf 372. meets ada ansi\icc a117.1 requirements., chopping table with 1 u/s.full length and full width 40mm food grade nylon chopping board supported by ss angle frame, 150mm rear splash on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., ss work table with 2 u/s.16swg ss top double beaded on all sides, reinforced with 25x25mm ss pipe frame structure, 150mm splash guard on rear side, 18swg ss under shelf reinforced with ss channel with 150mm clear gap from ffl, properly soundeadned, 38x38mm sq ss legs fitted with adjustable nylon bullet feet., commercial k

Co-operative

CTN :39980832

19 Apr, 2025 4.73 Lacs

Rewari - Haryana

Tender For calibration work of field instruments - 103568, 226.000, calibration of temp indicator with rtd required traceability certificates up to national standards like npl, ertl, and ertc etc... with non-breakable chain -3 chain minimum., 103568, 110.000, calibration of flow transmitter,required traceability certificates up to national standards like npl, ertl, and ertc etc... with non-breakable chain -3 chain minimum., 103568, 2.000, calibration of conductivity transmitter,required traceability certificates up to national standards like npl, ertl, and ertc etc... with non-breakable chain -3 chain minimum., 103568, 1.000, calibration of level transmitter,required traceability certificates up to national standards like npl, ertl, and ertc etc... with non-breakable chain -3 chain minimum., 103568, 1.000, calibration of dead weight tester,required traceability certificates up to national standards like npl, ertl, and ertc etc... with non-breakable chain -3 chain minimum., 103568, 18.000

Central Government/Public Sector

CTN :39814188

22 Apr, 2025 NA

Raipur - Chhattisgarh

Tender For corrigendum : supply of material code: w99311928186 bearings of centrifuge & feed pump only adani projects. , material code: w99311928216 cartridge filtetrs of oil purification system spec: st39013 , material code: w90318103427 seperator motor for lub oil purifier , material code: w90318103435 bearing for seperator motor 1 set nd and de spec: st39013 rev: 08 , material code: w90318103168 rtds for oil purification unit: 1 no. each type and range spec: st39013 , material code: w90318103150 pressure switch for oil purification unit: 1 no. each type and range spec: , material code: w90318103265 mandatory spare for dps across polishing filter of oil purifier unit , material code: w90318103192 level switch for oil purification unit: 1 no. of each type and range , material code: w90318103290 mandatory spares for flow switch of oil purifier unit, st-39013 spec: st3 , material code: w90318103176 pressure indicators for oil purification unit: 1 no. each type and range , material code: w90318103184 temp indicator for oil purification unit: 1 no of each type and range , material code: w90318103613 opu control panel spare spec: st39013 rev: 08 drg: 418101h3008 rev: 00 , supervision during erection and commissioning required of oil purification unit , material code: w90311928862 gaskets of all sizes & 'o' rings of all sizes for oil purification syste , material code: w90311928854 drg: 411928j8100 rev: 00 oil purification system (central) spec: st39013 r , material code: w90311928846 drg: 411928j8100 rev: 00 unit oil purification system spec: st39013 rev: 0

Central Government/Public Sector

CTN :39964946

22 Apr, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For procurement of air conditioning system for ntpc singrauli project - supply- ac and ventilation system -air cooled condensing unit , supply- ac and ventilation system -air handling unit -ahu , supply- ac and ventilation system -strip heaters , supply- ac and ventilation system -pan humidifier , supply- ac and ventilation system -copper refrigerant piping -suction line , supply- ac and ventilation system -copper refrigerant piping -liquid line , supply- ac and ventilation system -refrigerant gas , supply- ac and ventilation system -gss duct sheet - 24 g - air conditioning system , supply- ac and ventilation system -gss duct sheet - 22 g - air conditioning system , supply- ac and ventilation system -gss duct sheet - 20 g - air conditioning system , supplyac and ventilation system -gss duct sheet - 18 g - air conditioning system , supply- ac and ventilation system -volume control damper , supply- ac and ventilation system -fire damper , supply- ac and ventilation system -motorised actuator for fire damper , supply- ac and ventilation system -grills diffusers , supply- ac and ventilation system - accoustic insulation , supply- ac and ventilation system -thermal insulation , supply- ac and ventilation system -fine filter , supply- ac and ventilation system -dp switch , supply- ac and ventilation system -fresh air fan assembly , supplyac and ventilation system -cassette ac unit - 4 tr , supply- ac and ventilation system -cassette ac unit - 3 tr , supply- ac and ventilation system -cassette ac unit - 2 tr , spares- ac and ventilation system -v belts for blower , spares- ac and ventilation system -ahu blower bearings of each type , sparesac and ventilation system -blower motor bearing , spares- ac and ventilation system -pre filter for ahu , spares- ac and ventilation system -fine filter for ahu , spares- ac and ventilation system - electrical actuator , spares- ac and ventilation system -dp switch , spares- ac and ventilation system -relative humidity sensors , spares- ac and ventilation system -geyserstat , spares- ac and ventilation system -local humidity temperature indicators , etc- ac and ventilation system -air cooled condensing unit , etc- ac and ventilation system -air handling unit -ahu , etc- ac and ventilation system -strip heaters , etc- ac and ventilation system -pan humidifier , etc- ac and ventilation system -copper refrigerant pipingsuction line , etc- ac and ventilation system - copper refrigerant piping-liquid line , etc- ac and ventilation system -refrigerant gas , etc- ac and ventilation system -gss duct sheet - 24 g - air conditioning system , etc- ac and ventilation system -gss duct sheet - 22 g - air conditioning system , etc- ac and ventilation system -gss duct sheet - 20 g - air conditioning system , etc- ac and ventilation system -gss duct sheet - 18 g - air conditioning system , etc- ac and ventilation system -volume control damper , etc- ac and ventilation system -fire damper , etc- ac and ventilation system -motorised actuator for fire damper , etc- ac and ventilation system -grills diffusers , etc- ac and ventilation system - accoustic insulation , etc- ac and ventilation system -thermal insulation , etc- ac and ventilation system -fine filter , etc- ac and ventilation system - dp switch , etc- ac and ventilation system -fresh air fan assembly , etc- ac and ventilation system - cassette ac unit - 4 tr , etc- ac and ventilation system -cassette ac unit - 3 tr , etc- ac and ventilation system -cassette ac unit - 2 tr , etc- ac and ventilation system -cable laying

Central Government/Public Sector

CTN :39966832

21 Apr, 2025 NA

Pune - Maharashtra

Tender For supply of 6 level, mini strip, horizontal, irreversible self adhesive temperature indicator sticker of size 12 x 32 mm. temperature 65 to 93 degree centigrade. 6 level note: each set co nsists of 10 nos. of stickers [ warranty period: 30 months after the date of delivery ]

CTN :39949417

07 May, 2025 NA

Multi City - Multi State

Tender For supply of temperature indicator & alarm switch electronic

Temp Indicator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors