Latest temperature control system Tenders | Government temperature control system Tenders

State Government

CTN :45695199

10 Jul, 2026 4.99 Crore

Belgaum - Karnataka

Tender For tender for establishment of centre of excellence in electrical vehicle power train technologies at vtu regional centre, bengaluru - servo motor rotating arm e, propeller fin e, battery connector e, jumper pin header e, battery holder e, usb cable e, button cap (large)passive elements, button(small) passive elements, button(large)passive elements, potentiometer(10ko)passive elements, switchpassive elements, capacitor(10uf)passive elements, capacitor(104)passive elements, resistor(10ko)passive elements, resistor(1ko)passive elements, resistor(220o)passive elements, big blue led active elements e, big yellow led active elements e, big green led active elements e, big red led active elements e, rgb led active elements e, active elements 1n4001 diode, active elements 1n4148 diode, pnp transistor(8550) active elements, npn transistor(8050) active elements e, relay active elements e, active buzzer active elements ev, motor driver e, seven segment display e, lcd display e, dc motor e, servo motor e, jumper wires e, tx/rx module e, tilt sensor e, ultrasonic sensor holder e, light sensor e, ultrasonic proximity sensors e, analog temparature sensors e, breadboards e, uno board e, usb cable for stm32 board e, ecu board, stm32 discovery board e, battery cell making machine, integrated electronics workstation, pcb design equipment, dynamometer 2w, electrical vehicle motors and drives workbench, battery management system (bms) training module e, model-based development (mbd) real-time controller, power electronics training bench, off board charger control board, pe-pp control panels, pdi unit, dc converters, drive axles, wheel axles, foot throttle e, auxiliary battery, relay e, harness, wheels e, differential e, moter ev, bms e, vcu e, mcu e, on board charger, battery pack e, naked chassis, belt pulley e, female type 6 charging socket e, front wheel axle ev, front wheel rim ( 12 inch) e, tubeless tyres e, main stand ev, side stand ev, mid - drive chassis e, switches ignition, horn, indicator, head light ev, cone-set ev, handle bar ev, t-stamp ev, fork ev, smart charger can ev, dc dc converter ev, swing arm ev, vcu ev, brake sensors ev, display ev, wiring harness ev, throttle (re twistable) ev, mid drive motor 3kw and pull belt e, mcu 120a e, battery 4kw nmc ev, cordless drill machine tools ev, tool kit trolley tools e, pipe wrench tools e, screwdriver 803 tools e, taparia screw driver 863 200 tools ev, taparia philips s/d psc862250 tools ev, taparia screw driver 861 100 tools e, installation tape tools ev, soldering gun tools e, multimeter tools e, hammer - 40mm nylon tools ev, hammer - 500g tools ev, chissel tools ev, tools 24pc socket set box, long circlip plier outer tools ev, long circlip plier inner tools ev, t spanner 14mm tools ev, t spanner 12mm tools ev, t spanner 10mm tools e, t spanner 8mm tools ev, t spanner 7mm tools ev, connector - 902 tools ev, tester tools ev, nose plier tools ev, monkey plier tools e, wise grip plier tools e, cutting plier tools e, wire cutter tools e, screw driver 2 in 1 - 903ibt tools ev, ring spanner set tools ev, double end spanner set tools ev, t allen key 3,4,5,6 mm tools ev, l allen key set tools ev, motor hall phase tester ev, continuity tester ev, safety helmet, programmable mcu, clamp meter ev, taco meter ev, mid drive mcu, hub motor mcu, hall sensor ev, mid drive stator, hub drive stator, induction stator, bldc stator, mid drive rotor, hub drive rotor, induction rotor, bldc rotor, induction motor, brush motor, shaft drive motor ev, bldc motor, pmsm motor, ev 4w - car, ev 3w - auto ev, ev2w - shaft drive - full vehicle, ev 2w - hub drive full vehicle ev, ev 2w - mid drive - full vehicle ev, ev 2w - hub drive - full vehicle ev, ev 2w - mid drive - full vehicle, ev 2w - hub drive - full vehicle, eight channel 3 amps cdc cell grading machine, cells bolt, cell 3.2 v 100ah lfp, hot air blower ev, green 100mm insulation, clamp meter 0-600 amps, battery tester, bus bars, screw gauge ev, silicon black, bla

CTN :45238287

26 Jun, 2026 1.45 Crore

Dehradune - Uttarakhand

Tender For bid to ras supply of self regulating heating tape cable e e - title1 , title2 , title3 , title4 , title5 , title6 providing self-regulating heat tape / resistance heating cable suitable for freeze protection of pipelines and utilities, having rated output of 35 w per meter at 220 v ac supply. the heating cable shall automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating. the cable shall be suitable for continuous operation in outdoor conditions, flexible for installation around pipelines, joints and valves, and compatible with temperature controller systems., providing m20 3-pin connector suitable for making secure electrical joints between self-regulating heat cable terminals, designed for reliable power and signal continuity. the connector shall be rated for operation at 220 v ac supply and compatible with heating cables of specified capacity. it shall ensure safe and firm termination, with robust insulation to prevent moisture ingress, short circuits, and electrical leakage.the connector shall be constructed from high-quality, weather-resistant materials, suitable for continuous outdoor operation under varying environmental conditions. it shall provide ease of installation, with a compact and durable design for use at pipeline joints, terminations, and interconnections. the m20 connector shall be compatible with temperature control systems and associated accessories, ensuring long-term performance, safety, and protection against overheating, corrosion, and mechanical stress., providing temperature differential controller with auto and manual operation, housed in a robust ip65-rated enclosure, suitable for controlling heat tracing systems to prevent freezing of pipelines and utilities. the controller shall be designed to automatically switch the heat tape on/off based on preset temperature ) /bid number : gem/2026/b/7550906 * /dated: 18-05-2026 & & / bid document 1 / 13

CTN :45632219

02 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of commercial multifunction steam vessel versatility precise temperature control system with six module tray as per sow , provision of vitrified tile flooring below steam vessel size 8x8 ft pdf layout design mandatory to upload , provision of vitrified tile work with sliding wooden doors below granite cupboard size 10x3 ft , provision of core cutting for fresh water pipeline inlet, electrical wiring inlet drain water outlet , supply and installation of 1 point 1kv grade 16 sq mm 5 core armoured cable x lpe pvc is 7098 with required excavation brick work and cable marker as required 120 rmt approx length , supply and installation of 100 a breaker and 40 a 4pole mccb industrial socket connection , supply and installation of cpvc fresh water pipeline for equipment size 3 by 4 inch 1by 2 inch , supply and installation of commercial g i ducting for steam vessel size length 9 ft with 18 inch exhaust fan , commercial ss table for steam vessel size 3x3x3ft , supply and installation of 25lph industrial ro water purifier with connection , provision of 6w inverter for led touch control panel of steam vessel , installation and commissioning charges if any in addition to above

CTN :45602234

09 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of pricol paint remover , 25 mm gi pipe , nut bolt m.s , welding rod 2.5 mm , 4 inch ss hinges millinium , g.i mesh 20x20 roll , 25 x 6 csk head screw per packet , ms flat , spray paint , gloves leather , gate hook ss 6 inch , transportation charges , 9v battery connector , qr code scanner , 3.5 inch tft display with spi interface , 2 mm acrylic sheet , pvc board sheets , dc buzzer , tof distance sensor , 11.1v 4000mah battery , lm2596 buck convertor , tp 4056 battery charges module , esp32 micro controller , cell holder , 3.7 v rechargeable , rocker switch , arduino uno r3 , breadboard , heat shrink 5mm , 2.5 mm heat shrink , ribbon cable 10 wire , jumper wires , 9v battery , in 4148 diode , 1 kohm resistor , 220 kohm resister , active buzzer module , hcsr04 ultrasonic sensor module , npn transistor , glue sticks , adxl345 accelerometer module , push button * /bid number : gem/2026/b/7678952 + /dated: 18-06-2026 ' ' / bid document 1 / 34

CTN :45281561

20 Jun, 2026 59.46 Lacs

Leh Ladakh - Jammu And Kashmir

Tender For bid to ras tender for supply of fixing self regulating heat tape cable insulation and accessories in ppr pipe - providing and fixing self regulating heat tape resistance heating cable suitable to protect freezing of water in pipelines having rated output of 35 w per meter at 220 v ac supply the heating cable shall have capabibility to automatically adjust its heat output based on surrounding temperature conditions to prevent freezing and overheating the cable should be suitable for continuous operation in outdoor in adverse climatic conditions flexible for installation around pipelines joints and valves and compatible with temperature controller systems , providing m20 3 pin connector suitable for making secure electrical joints between self regulating heat cable terminals designed for reliable power and signal continuity the connector should be operable for operation at rated 220 v ac supply and compatible with heating cables of specified capacity must l ensure safe and firm termination with robust insulation to prevent moisture ingress short circuits and electrical leakage the connector shall be made up from high-quality weather resistant materials suitable for continuous outdoor operation under adverse environmental conditions it should be ease in installation with a compact and durable design for use in pipeline joints terminations and interconnections the connector should be compatible with temperature control systems and associated accessories ensuring long term performance safety and protection against overheating corrosion and mechanical stress , providing temperature differential controller with auto and manual operation housed in a robust ip65 rated enclosure suitable for controlling heat tracing systems to prevent freezing of water in pipelines and utilities the controller should be capable to automatically switch the heat tape on off based on preset temperature differentials ensuring optimal performance and energy efficiency the controller should have in built safety features such as overrun protection and burn out protection to safeguard the heating cable and associated equipment from damage the enclosure shall be weatherproof and suitable for outdoor installation offering protection against dust and water ingress and ensuring reliable long term operation under harsh environmental conditions , providing pt100 temperature sensors with 10 metre cable suitable for accurate temperature measurement and control in heat tracing and pipeline monitoring applications the sensors should be made up of platinum resistance type pt100 ensuring high precision stability and reliability over a wide temperature range the wire with sensor should have high quality insulation suitable for reliable signal transmission and compatible with temperature controllers and monitoring systems the cable shall be durable flexible and suitable for installation in outdoor under extreame weather conditions in high altitude area , providing 3 core 1.5 sq mm pvc insulated and pvc round sheathed multicore flexible cable comprising bright annealed bare copper conductors suitable for heavy duty industrial applications rated for voltage grade up to 1100 volts the cable shall confirm to requirements of is 694 2010 the conductors shall be made of high-conductivity annealed copper ensuring efficient current carrying capacity and minimal losses each core shall be uniformly insulated with high-quality pvc compound and the overall cable shall be protected with a durable pvc outer sheath providing resistance against moisture abrasion and mechanical stresses the cable shall be flexible in nature allowing ease of installation in confined and complex routing conditions it should be suitable for continuous operation in indoor and outdoor adverse environments offering reliable performance electrical safety and long service life

CTN :45525479

06 Jul, 2026 11.85 Lacs

Kamrup - Assam

Tender For establishment of material testing laboratory under o/o the agm(c) design and projects aegcl kahilipara - civil works, compression testing machine (2000kn) with digital reading, automatic pace control with all attachment for testing concrete cube & bricks conforming to indian standards (is: 516, is: 14858) and can also be supplied as per british standards (bs: 1881), astm c-39 with calibration certificate. it should be typically calibrated to class 1 accuracy ( 1%); featuring a robust, fully welded loading unit and hardened, ground, and polished platens, often with a self-aligning upper platen; with display type as pc-controlled with software. it should have pace rate of full three-term pid feedback control with fully automated data acquisition, storage, and analysis. the operation should be fully automated, stress & strain controlled loading., aggregate impact test, crushing value apparatus with hammer weight of 13.75 kg 0.25 kg (or 14 kg 0.5 kg), height of free fall of 380 mm 5 mm, impact cup (mould) inner diameter of 102 mm 0.25 mm and impact cup depth of 50 mm 0.25 mm as per is 2386 (part iv), bs 812-112. automation grade often semi-automatic with a digital counter. display type digital for the blow counter; sometimes includes a digital gauge for other measurements. overall weight (approx.) should be of 45 kg to 60 kg (total machine mass). standards compliance conforms to international standards like is: 2386 (part iv), bs 812-112, etc. , sieves: (40, 20, 10, 4.75, 2.36, 1. 18) mm with lid and pan and (0.6, 0.3, 0. 15, 0.075) with lid and pan (all 200mm diameter size) metal : gi, weighing balance-30kg (accuracy-1gm)., weighing balance-5kg (accuracy-0.1gm)., hot air oven with double walled design, thick glass wool insulation to prevent heat loss, micro processor based auto tune pid digital temp controller cum indicators and 230 volt 50hz single phase ac supply, heavy duty stainless steel lock, indoor hinge and sample placement trays, temp range should be 50 degree c 250 degree c with temp accuracy 0.5 degree c. it should have digital led display of size 45 cm x 45 cm x 45 cm (inner)., cube mould (cast iron) of size 150mmx150mmx150mm, isi marked as per is:10086. weight of the mould will be about 13.5 kg, strictly as per bis specifications and within required tolerance., slump cone test apparatus-(isi marked)-with tamping rod (complete set ) as per is: 7320 and is: 1199 part 2, consisting of slump cone, base plate and graduated tamping rod - made of stainless steel., proctor test apparatus with all accessories as per is: 2720 part 8 and is: 10074(1982), complete with base plate and collar., measuring cylinder-borosilicate (1 complete set ) glass of sizes 100 ml, 250 ml, 500 ml and 1000 ml., field density test app-core cutter method ( complete set) complete with core cutter of 100 mm dia x 130 mm long with chromium plating, dolly for 100 mm dia core cutter, and rammer with steel rod as per is : 2720, rebound hammer digital (original/silver schmidt type n) with calibration certificate as per is 516 part 5, sec 4 with impact energy of 2.207 nm (1.63 ft-lbf), concrete strength range of 10 100 mpa (1450 14500 psi) and weight of 570 g (1.3 lb) with display as graphic lcd (e.g., 17x71 pixels) or analog/digital and battery life: >5000 impacts., ultrasonic pulse velocity test apparatus (proceq, acoustic control systems, vedantrik technologies) with calibration certificate and frequency range of 24 500 khz (nominal transducer); measurement resolution of 0.1 s (microseconds); pulse voltage ranging from 125 v to 500 v (adjustable); receiver gain of 1x, 10x, 100x, auto, up to 1000x (lab+ model); pulse shape as square wave; measurement modes as pulse velocity, surface velocity, e-modulus, compressive strength correlation, crack depth; memory which stores >500 measured values; display should be 79x21 mm passive matrix oled; connectivity through usb for pc connection; software: pundit link for analysis and export. standards compliance

CTN :45354788

17 Jun, 2026 NA

Shekhapura - Bihar

Tender For bid to ras supply of arduino uno microcontroller , breadboard , jumper wires male female , resistors , led red green , capacitors , transistors , diodes , sensors , lcd , relay module , motors , power supply battery , multimeter , soldering kit , project work station , fpga trainer boards , logic analyzer , dual regulated power supply , arduino uno , stm dev board , pic development kit , raspberry pi , digital multimeter , dac trainer board , rtos trainer , soldering stations , lm analog temp sensor , ds digital temp sensor , ptrtd resistance temp detector , k type thermocouple , ir proximity sensor reflective ir , digital ir obstacle sensor , ir flame sensor , ir temperature sensor mlx90614 , mq two lpg smoke , mq three alcohol , mq six lpg butane , mq seven carbon monoxide , mq air quality , pir motion sensor , ultrasonic sensor , accelerometer , gyroscope , solderless breadboard full size , mini breadboard , jumper wires male male , jumper wires male female , jumper wires female female , ic socket eight pin , ic socket fourteen pin , ic socket sixteen pin , solar cell trainer kit , ujt as relaxation oscillator kit , scr characteristics kit , ldr , photo diode , phototransistor , semiconductor temperature coefficient trainer kit , logic gate trainer kit , ic trainer kit , measurement of steady state and transient response of rl rc and rlc circuits , frequency response of twin t notch filter and to study of active filter , study of single phase inverter trainer , to study the behaviour , determine the transient , to study of pid controller for simullatio n process , to study basic electric al trainer , to study single phase transformer , to obtain efficiency of a dc shunt machine , to obtain efficiency and voltage regulation of a single phase transform , to study dc series motor , make connection of dol starter , test the machines required , maxwells bridge trainer kit ) /bid number : gem/2026/b/7582907 * /dated: 27-05-2026 & & / bid document 1 / 44

CTN :45516505

26 Jun, 2026 1.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For tender for repairing and calibration of temperature indicators installed on boiler , work of repairing, calibration and rewiring of superheated wash water temperature control system , laying of comprehensive cable, installation of thermocouple and commissioning of indicators at the boiler station , work of repairing, rewiring, overhauling and commissioning of d- superheating system of exhaust line , repairing and commissioning work of temperature indicators of sulfur furnace , laying of compressive cables of sulfur furnace, installation of sensors and commissioning of temperature indicators , to carry out installation and commissioning work for raw-sulfated juice, clear juice, exhaust steam and injection water inlet temperature , over hauling, rewiring and recommissioning of auto drum water level control system of boilers , rewiring and recommissioning of high or low alarm system on boilers for water level , overhauling, rewiring and recommissioning of boiler steam generation system , overhauling, rewiring and recommissioning of boiler feed water measurement system

Central Government/Public Sector

CTN :45467531

15 Jun, 2026 NA

Chatra - Jharkhand

Tender For supply of mandatory spares for chemical dosing skids , mandatory spares for oxygen dosing skids - drive shaft cum worm , drive worm wheel , connecting rod plate , cross head guide bush , plunger , plug , oil seal , washer , gland nut , electronic transmitter , transmitter of all type, ranges & model no. (for measurement of pressure, differential pressure flow, level, etc). , pressure transmitter , differential pressure transmitter , level transmitter , temperature element , local indicators like temperature gauges, pressure gauges, differential pressure gauges, flow gauges, flow meter etc. , pressure gauge , pressure gauge , diff. pressure gauge , process actuated switch devices includes all type of pressure, differential pressure, flow, , temperature, differential temperature, level switch devices. , process connection piping (for impulse piping/tubing, sampling piping/tubing and air supply piping , applicable) , valves of all types & models , 2 way, 3 way, 5 way valve manifolds , fitting , measuring instrument , electronic transmitters , transmitter of all type, ranges & model no. (for measurement of pressure, differential pressure flow, level, etc). , level transmitter (ultrasonic / radar type) , temperature element , local indicators like temperature gauges, pressure gauges, differential pressure gauges, flow gauges, flow meter etc. , process actuated switch devices includes all type of pressure, differential pressure, flow, temperature, differential temperature, level switch devices. , pd type flow transmitters , any other instrument (if applicable) , process connection piping (for impulse piping/ , valves of all types & models , 2 way, 3 way, 5 way valve manifolds , fitting , purge meter , filter regulators , mass flow controller , control valves actuators & accessories , pneumatic & electro-hydraulic actuator assembly , valve trim (including cage, plug, stem, seat ring, guide busing etc.) , diaphragm 'o' rings seals etc, all types of make etc. , pressure gauges of all types of make, rating, etc. , solenoid valves (if applicable) , positioner unit (complete unit) , pneumatic air filter/regulator of each type, makes rating etc. , air lock relays

Co-operative

CTN :45444048

20 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin

Temperature Control System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Co-operative