Tender For supply of digital snap gauge with dial indicator. least count 0.001 mm, range: 200-225 mm, along with calibration sticks. detailed specification as per annexure attached. make: mitutoyo or similar.note: 1. calibration certificate from nabl/govt. approved test lab to be supplied along with the material. 2. wooden box to be provided along with material for each item separately.
Tender For supply of metrology instruments d d - absolute digimatic indicator range 25 mm or 1 inch , digital dial depth gauge range 0-200 mm or 0 to 8 inch , dial thickness gauge reading 0.1 mm range 10 mm graduation 0 to 10 mm , dial thickness gauge reading 0.01 mm range 10 mm graduation 0 to 100 mm , digital dial thickness gauge reading resolution 0.001 mm 0.00005 inch range 25 mm or 1 inch throat depth 200 mm , bore gage range 6 to 10 mm stroke of contact point 0.5 mm accuracy 0.005 mm repeatability 0.002 mm , bore gage range 10 to18.5 mm stroke of contact point 0.6 mm accuracy 0.005 mm repeatability 0.002 mm , dial bore gauge with dial bezel diameter 56 mm range 18 to 50 mm reading resolution 0.001 mm depth 110 mm graduation 0 to100 mm , dial bore gauge with dial bezel diameter 56 mm range 50-150 mm reading or resolution 0.001 mm depth 150 mm graduation 0 to 100 mm , digital durometer or rubber hardness tester shore a range 0 to100 ha resolution 0.5 hd accuracy plus or minus 2hd , digital durometer or rubber hardness tester shore d range 0 to 100 resolution 0.5 hd accuracy plus or minus 2hd , cast iron comparator stand size 220 x 160 mm , magnetic vee block 1 pair size 150 x 75 x 100 mm holding sizes dia 5 dia to 70 mm weight 12 kg or less pair pulling 125 kg or more , digital vernier caliper range 0 to 300 mm or 0 to 12 inch resolution or reading 0.01 mm or 0.0005 inch weight 210 gm or less , digital vernier caliper range 0 to 200 or 0-8 inch reading 0.01 mm or 0.0005 inch weight 170 gm or less , digital vernier caliper range 0 to 150 mm or 0 to 6 inch resolution or reading 0.01 mm or 0.0005 inch weight 145 gm or less , dial vernier caliper range 0 to 200 mm resolution or reading 0.02 mm , dial vernier caliper range 0 to 300 mm resolution or reading 0.02 mm , digital vernier caliper with 150 mm jaw length range 0 to 600 ) /bid number : gem/2025/b/6794206 * /dated: 17-10-2025 & & / bid document 1 / 25 & & ' ' /item category mm or 0 to 24 inch resolution or reading 0.01 mm or 0.0005 inch ip 66 acc to iec60529 , external micrometer with interchangeable anvils range 100 to 200 mm or 4 to 8 inch reading 0.01 mm or 0.001 inch , disc micrometer rotating range 0 to 25 mm or 0 to 1 inch reading 0.01 mm or 0.001 inch , disc micrometer rotating range 50 to 75 mm or 2 to 3 inch reading 0.01 mm or 0.001 inch , disc micrometer rotating range 75 to 100 mm or 3 to 4 inch reading 0.01 mm or 0.001 inch , digital height gauge range 0 to 600 mm or 24 inch sr44 battery 1.55v replaceable silver oxide battery as per specification , portable surface roughness tester range 200 micron to 160 micron measuring force 4mn type as per specification , measuring pin set range dia 0.5 to 3 mm resolution step of 0.01 mm no of pins 251 nos , digital bevel protractor range 0 to 360 degree 90x4 resolution 0.05 degree , set of double ended metric thread plug gauges m3 x 0.5 6h m4 x 0.7 6h m5 x 0.8 6h m6 x 1.0 6h m8 x 1.25 6h m10 x 1.5 6hm12 x 1.75 6h with both go-no go total quantity 07 nos , set of metric thread ring gauges m3 x 0.5 6g m4 x 0.7 6g m5 x 0.8 6g m6 x 1.0 6g m8 x 1.25 6g m10 x 1.5 6g m12 x 1.75 6g with both go no go total quanty ity 14 nos , digital depth vernier caliper range 0 to 300 or 0 to 12 inch reading 0.01 mm or 0.0005 inch , internal micrometer range 3 to 4mm accuracy 0.004mm or 0.00015 inch depth 12 mm or 0.47 inch , internal micrometer range 4 to 5mm accuracy 0.004 mm or 0.00015 inch depth 18 mm or 0.70 inch , internal micrometer range 5 to 6 mm accuracy 0.004 mm or 0.00015 inch depth 18 mm or 0.70 inch , internal micrometer range 6 to 8 mm accuracy 0.004 mm or 0.00015 inch depth 58 mm or 2.28 inch , internal micrometer range 8 to 10 mm accuracy 0.004 mm or 0.00015 inch depth 58 mm or 2.28 inch , internal micrometer range 10 to 12.5 mm accuracy 0.004 mm or 0.00015 inch depth 58 mm or 2.28 inch
Tender For digital wheel distance measuring gauge model: wg-1e of m/s. pie or equivalent for bgwheel with lcd display along with spirit level, 1.5v button cell, least count 0.01mm, range: 1585 to1615mm, accuracy 0.01mm with double display system. calibration certificate shall be submitted withsupply of item from nabl/nabl accredited /government approved laboratory. make : pie, model : wg-4(e)
Tender For supply of set of gauges for checking screw coupling of transition cbc. the item consists 06 various typesas follows: 1) condemning gauge for short shackle screw coupling size: go-29.50mm & no go-25.0mm. qty- 1 no as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification : tool steelto is no. 3748/90. hardness 50/55 hrc. 2) condemning gauge for long shackle screw coupling size: go-45.0mm & no go-39.50mm. qty - 1 no as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification : tool steel to is no. 3748/90. hardness 50/55 hrc. 3) condemning gauge for checking the play between the hole short shackle & trunion screw pin condemning size: 187.0mm . qty - 1 no as per rdsodrg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification : tool steel to is no. 3748/90. hardness 50/55 hrc. 4) condemning gauge for checking the play between the hole long shackle & trunion nut pin condemning size: 278.0mm . qty - 1 no as per rdso drg. no. 4685 & rdso-mp-mi-no-25. rev.0, jan 2006. material specification : tool steel to is no. 3748/90. hardness 50/55 hrc. 5) screw pitch gauge (go & nogo) (knuckle thread -lh) size: r- 1.404mm & r-1.625mm . qty - 1 no as per rdso-mp-mi-no-25. rev.0, jan 2006. 6) screw pitch gauge (go & no go) (knuckle thread - rh) size: r- 1.515mm & r- 1.625mm . qty -1 no as per rdso-mp-mi-no-25. rev.0, jan 2006. note: the firms with past performance of the tendered/same items subject to submission of proof of documents such as pos/r note are only eligible.
Tender For air brake equipment.supply of these three consisting item in one set (1) pressure gauge (pressure capacity 10kg\cm2) for measuring bp, fp, bc & cr pressure in dv panel of lhb coaches. qty -2 no. (2) thermo plastic tube with both end connectors for pressure testing in ftil make dv panel pressure capacity ?10kg\cm2. qty -1 no. (3) coupling pressure testing connector (brass material) in kbi and escorts make dv panel. pressure capacity -10kg/cm2.qty -1 no.
Tender For corrigendum : supply of c73340415174 supply of high static pressure ductable ac unit capacity 8point5 tr having one indoor and one out door unit consisting of scroll compressor refer annexure iii , 100000000001 supply of suitable size refrigerant grade copper piping between indoor and outdoor units of ductable split ac units 8point5 tr refer annexure iii , 100000000002 providing cpvc sdr11 pipes 32 mm with 9 mm thick tube type nitrile rubber insulation refer annexure iii , 100000000003 providing of cpvc sdr11 pipes 25 mm with 9 mm thick tube type nitrile rubber insulation refer annexure iii , 100000000004 supply of site fabricated gi sheet metal ducts of 22 guage birmingham gauge 0point8 mm and zinc coating not less than refer annexure iii , 100000000005 supply of thermal insulation for supply air ducts with 19 mm class o thick self adhesive closed cell elastomeric refer annexure iii , 100000000006 supply of acoustic insulation for ducting with open cell nitrile rubber insulation or open cell physically crosslinked polyolefin foam refer annexure iii , 100000000007 supply of volume control dampers vcd for ducts made of gi sheet of thickness not less than 18 g refer annexure iii , 100000000008 supplying of xlpe insulated, pvc sheathed, armoured, copper conductor 1point1 kv grade lt cable of size 4 core - 6 sqmm refer annexure iii , 100000000009 supply of xlpe insulated, pvc sheathe, copper conductor, , 1point1 kv grade lt cable of size 4 core - 2point5 sqmm refer annexure iii , 100000000010 supply of 300 mm width x 50 mm depth x 1point6 mm thickness perforated hot dipped galvanised iron cable tray with cover refer annexure iii , 100000000011 supply of 150 mm width x 50 mm depth x 1point6 mm thickness of perforated hot dipped galvanised iron cable tray refer annexure iii , 100000000012 installation testing and commissioning of high static pressure ductable ac unit ) /bid number : gem/2025/b/6778840 * /dated: 13-10-2025 & & / bid document 1 / 20 & & ' ' /item category capacity 8point5 tr refer annexure iv , 100000000013 erection testing and commissioning of suitable size refrigerant grade copper piping between indoor and outdoor units of ductable split ac refer annexure iv , 100000000014 laying of cpvc sdr11 pipes 32 mm with 9 mm thick tube type nitrile rubber insulation refer annexure iv , 100000000015 laying of cpvc sdr11 pipes 25 mm with 9 mm thick tube type nitrile rubber insulation refer annexure iv , 100000000016 fabrication installation testing and commissioning of site fabricated gi sheet metal ducts of 22 guage refer annexure iv , 100000000017 fixing thermal insulation for supply air ducts with 19 mm refer annexure iv , 100000000018 fixing acoustic insulation for ducting with open cell nitrile rubber insulation or open cell physically crosslinked polyolefin foam refer annexure iv , 100000000019 erection testing and commissioning of volume control dampers vcd for ducts made of gi sheet refer annexure iv , 100000000020 laying of xlpe insulated,pvc sheathed, armoured,copper conductor,1point1 kv grade lt cable of size 4 core - 6 sqmm refer annexure iv , 100000000021 laying of xlpe insulated, pvc sheathe, copper conductor 1point1 kv grade lt cable of size 4 core - 2point5 sqmm refer annexure iv , 100000000022 installation of 300 mm width x 50 mm depth x 1point6 mm thickness perforated hot dipped galvanised iron cable tray with cover refer annexure iv , 100000000023 installation of 150 mm width x 50 mm depth x 1point6 mm thickness of perforated hot dipped galvanised iron cable tray refer annexure iv , 100000000024 dismantling and shifting of existing ductable indoor and outdoor 23 x8point5 tr outdoors are installed at roof tops of first to third floor refer annexure iv , 100000000025 dismantling and installation of existing false ceiling approx 800 sqfeet for installation of ductable split ac above false ceiling with all fitting same as before refer annexure iv
Tender For set of pressure gauge fitting consisting [set of pressure gauge fitting consisting of two items :- item no. (1) faiveley fitting flexible hose pipe 700 mm long for bc measurement ,one side with 3/8 inch bsp while other side with 3/8 inch bsp with nipple. pressure with holding capacity 20 bar to 60 bar , o ring and washer to be provided to arrest leakage. od of hose has to be 6 mm and id to be 2 mm item no. (2) knorr/escort fitting flexible hose pipe 700 mm long for bc measurement ,one side with 3/8 inch bsp while other side with 3/4 inch bsp with nipple. pressure with holding capacity 20 bar to 60 bar , o ring and washer to be provided to arrest leakage. od of hose has to be 6 mm and id to be 2 mm. note :- sample to be approved before bulk supply.]