Latest temperature gauges Tenders | Government temperature gauges Tenders

Central Government/Public Sector

CTN :45502353

03 Jul, 2026 NA

Multi City - Multi State

Tender For corrigendum : spm/b933-000-yi-mr-1100/192 - pressure and temperature gauges for bina petchem and refinery expansion project (bprep)

Central Government And Public Sector

CTN :45702517

06 Jul, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of others - total qty.= 19310.02 kgs., description: - scrap of abandoned height gauge structure i.e. estimated iron fittings(angle, ismb, ismc etc.). remarks - 1) after dismantling, all debris of condemned steel structure should be collected and removed from the site before effecting the delivery. 2) any type of hidden materials which is found during dismantling of building like rails angles, channels etc. should not be offered. the above iron materials must be handed over to concern sse/works/line/bsp store. 3) dismantling of the above structure will be done by the purchaser at his own cost and risk and without causing any loss to any railway property. purchaser will demolish and clear up to ground level only. while dismantling explosive should not be used. all the debris, unserviceable materials to be cleared from site to outside railway land by the purchaser. 4) any loss due to theft, accident etc. shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railway. 5) material to be sold on as is where is basis and should be delivered in weight.

CTN :45688680

06 Jul, 2026 NA

Katipala - Karnataka

Tender For tender for calibration of pressure gauges , calibration of temperature gauges , calibration of pressure transmitter , calibration of temperature transmitter , calibration of pressure switch , calibration of differential pressure transmitter , calibration of rtd_ temp element , calibration of flow transmitter

Central Government/Public Sector

CTN :45637861

02 Jul, 2026 NA

Ratlam - Madhya Pradesh

Tender For auction sale of others - released, condemned and u/s miscellaneous ms scrap consisting, {angle, rail pieces, gi pipes off size, gi sheet, iron board (angle+gi sheet) scrap of old broken water tank, channel sec, fencing, tie bar, covershed, steel bar, tmt bar, round bar, beams, flate, height gauge, flush tank, h/pump body, c.i. pipes off size, door, fencing wire}, total qty- 35.00 mt, location- sse-works-nmh office, sse-works-nmh outside office & pump room back side. mode of delivery by actual weighment basis and on as is where is basis, custodian- sse-works-nmh, fdp-50 days. note- cutting is permitted for easy loading only not into small pieces.

Central Government/Public Sector

CTN :45637761

29 Jun, 2026 NA

Kota - Rajasthan

Tender For auction sale of others - pl no- 98050035 m.s. & scrap consisting of ms angle, channel bar, gi sheet, gi pipe off size, ms door, tiebar, bolt nut, rel. offsize rail pieces, tank plate, tiebar frame, jafari, broken tree guard, hand pump body & pipe, gi fitting, ismb & ismc of height gauge and attachments if any, etc. total qty.=50.02 mt. for stock holder sse/w/ggc. ss-11 no.-sse/w/ggc/scrap/2026-27/08 date 14.05.2026. ds-8 no.-875513 dt.08.05.2026. lot should be sold on as is where is basis. purchasers are requested to see the lot/site and approchable road before bidding. no claim will be entertained after sale of lot. the stock holder is responsible for any alteration, deletion & variation in the lot or in weighment or tempering with the lot will be solely responsibility of stock holder after joint inspection, if any found subsequently. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. all necessary safety precautions shall be strictly adhered to by the purchaser at their own risk and responsibility. the purchaser shall be solely and entirely responsible for any negligence or mishandling. delivery will be given by actual weight on government approved dharam kanta only. note-cutting may be allowed for easy loading at the time of delivery. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.the material are lying in rajasthan state.

Central Government/Public Sector

CTN :45467531

15 Jun, 2026 NA

Chatra - Jharkhand

Tender For supply of mandatory spares for chemical dosing skids , mandatory spares for oxygen dosing skids - drive shaft cum worm , drive worm wheel , connecting rod plate , cross head guide bush , plunger , plug , oil seal , washer , gland nut , electronic transmitter , transmitter of all type, ranges & model no. (for measurement of pressure, differential pressure flow, level, etc). , pressure transmitter , differential pressure transmitter , level transmitter , temperature element , local indicators like temperature gauges, pressure gauges, differential pressure gauges, flow gauges, flow meter etc. , pressure gauge , pressure gauge , diff. pressure gauge , process actuated switch devices includes all type of pressure, differential pressure, flow, , temperature, differential temperature, level switch devices. , process connection piping (for impulse piping/tubing, sampling piping/tubing and air supply piping , applicable) , valves of all types & models , 2 way, 3 way, 5 way valve manifolds , fitting , measuring instrument , electronic transmitters , transmitter of all type, ranges & model no. (for measurement of pressure, differential pressure flow, level, etc). , level transmitter (ultrasonic / radar type) , temperature element , local indicators like temperature gauges, pressure gauges, differential pressure gauges, flow gauges, flow meter etc. , process actuated switch devices includes all type of pressure, differential pressure, flow, temperature, differential temperature, level switch devices. , pd type flow transmitters , any other instrument (if applicable) , process connection piping (for impulse piping/ , valves of all types & models , 2 way, 3 way, 5 way valve manifolds , fitting , purge meter , filter regulators , mass flow controller , control valves actuators & accessories , pneumatic & electro-hydraulic actuator assembly , valve trim (including cage, plug, stem, seat ring, guide busing etc.) , diaphragm 'o' rings seals etc, all types of make etc. , pressure gauges of all types of make, rating, etc. , solenoid valves (if applicable) , positioner unit (complete unit) , pneumatic air filter/regulator of each type, makes rating etc. , air lock relays

CTN :44610275

11 Jun, 2026 NA

Ernakulam - Kerala

Tender For bid to ras corrigendum : tender for supply of thermostat for oa 1854 , star delta timer 3 60sec 240v ac 50hz , shaft for fan for ahu , split ac model ftks 71 , liquied line filter drier , core for liquid line filter drier , auxiliary contacts , expansion valve ahu 2 5point6 tr , set of gasket both ends , corrossion protection plug , under voltage relay 415v 50 hz , set of seals for oil cooler , 100a hand change over swithch , 63a hand change over swithch , 160 a mccb , plc electronic module analogue input 6960379 , spares for oil duplex filter , reagent a in plastic bottle 1000 ml , regent b in plastic bottle 50 ml , regent e in plastic bottel 500 ml , regent f in plastic bottle 200 ml , regent g in plastic bottle 500 ml , filter paper 50 nos , fcu 4 fan coil unit , fcu 6 , angle valve 1 4 x 1 4 , gauge pressure compound 0 300 psi 2 dia suction , gauge temp 0point150c dial with 4mtr sensor 6 , main engine f w cooling prpointtransmitter range 0 to 6 bar , gear box s w pressure oulet indicator range 0 to 6 bar , temperature gauges 10 to 50 , temp sensor resistance thermometer pt 100 , starting air pressure transmitter range 0 to 60 bar , starting air pressure indicator range 0 to 60 bar , pcb b1 , electro magnetic valve , drive pin , set of o rings , dry running protection , test cock , level sensing probe , piece distance , gasket , cord type tc air filter insert copper mesh , socket screw , oil separator 7 8 , ring nut , locking washer , thermometer , 5hp 4 pole f 5112m condpointpump motor , gasket , set of spare screws , flow switch , differential pressure relief valve , o ring for filter element , shaft seal , membrance cleaner i , activated carbon , oil seal , oil seal , mechanical seal , kit valve , mechanical seal lp feed pump water , product rotameter , pressure guage 0 140 kg sqpointcm , nc solenoid valve coil 2 way , cd 9 assembly kit , hpointppoint hose 1 bsp , v belt , top cover gasket for cartridge filter , o ring for carbon filter , membrane cleaner ii , membrane cleaner iii , neutralite

CTN :45197775

09 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : tender for supply of c25m260055 procurement of temperature gauges for cpcl chennai - tempr.gauge , -50 to 50 deg.c , stem-320 mm , temp. gauge , -50 to100 deg.c , stem-320 mm , temp.gauge , 0-100 deg.c , stem-320 mm , temperature gauge , stem length-450 mm , temperature gauge , stem length-550 mm , temperature gauge , stem length-320 mm , temp gauge , bimetal u , 1/2 m , 0-200 , l-450 , gauge temp bimetallic , 0-200 degc , 500 mm , temp. gauge 0-250 deg.c , stem-300 mm , temp.gauge , 0 to 250 deg.c , stem-450mm , temperature gauge , range-0 to 250 deg.c , gauge , temp , stem length 540 mm 0-250 c , temp.gauge , 0-300 deg.c , stem-450 mm , temp.gauge , 0-300 deg.c , stem-550 mm , temp.gauge , 0-400 deg.c , stem-320 mm , temp. gauge0-400 deg.cstem-420 mm , gauge temp , bimetallic , 0-400 degc , 405mm , temp. gauge , 0 to 400 deg.c. , stem - 550mm , temp. gauge 0-450 deg.c , stem-450 mm , temp. gauge gas l-400mm 0-600 deg.c , temp. gauge , 0-800 , stem-440mm