Latest temperature measurement scrap Tenders | Government temperature measurement scrap Tenders

Central Government/Public Sector

CTN :45548749

22 Jun, 2026 NA

Saran - Bihar

Tender For supply of non contact temperature measurement gun as per rdso specification no.rdso/2013/cg-07. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45549311

02 Jul, 2026 NA

Jaipur - Rajasthan

Tender For supply and commissioning of test bench for auxiliary motor, micro processor based. as per following description: [1] supply 440 v ac, 3 phase, [2] measurement, digital display and recording of motor input voltage. [3] measurement, digital display and recording of motor input current. [4] measurement, digital display and recording of kva and kw. [5] measurement, digital display and recording of motor speed. [6] measurement, digital display and recording of motor de and nde temperature. [7] measurement, digital display and recording of resistance. [8] measurement, digital display and recording of inductance. [9] software for downloading and analysis of data. [10] 500 volt insulation resistance meter for measurement and recording of insulation resistance between winding and earth. [11] single phasing and reverse phase protection. [12] earth fault and overvoltage protection. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45544350

25 Jun, 2026 NA

Sundergarh - Odisha

Tender For supply of tundish working lining, for new caster , tundish backup lining, for new caster , continuous temperature measurement systm

CTN :45521206

20 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of mechanical lab equipments - equipments for lab, recirculation type air contioning system kit capacity: 1 tr refrigerant: r134a hermetic compressor, single phase, 230v ac, 50hz air-cooled condenser with fan evaporator with air duct arrangement and recirculation provision expansion device: txv preferred (or capillary tube) air duct with recirculation damper temperature measurement at air inlet and outlet airflow measurement provision mounted on rigid ms frame with complete piping and controls

CTN :44560727

15 Jun, 2026 NA

Uttara Kannada - Karnataka

Tender For bid to ras supply of low temperature kinematic viscometer with auto viscosity measurement

CTN :45516505

26 Jun, 2026 1.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For tender for repairing and calibration of temperature indicators installed on boiler , work of repairing, calibration and rewiring of superheated wash water temperature control system , laying of comprehensive cable, installation of thermocouple and commissioning of indicators at the boiler station , work of repairing, rewiring, overhauling and commissioning of d- superheating system of exhaust line , repairing and commissioning work of temperature indicators of sulfur furnace , laying of compressive cables of sulfur furnace, installation of sensors and commissioning of temperature indicators , to carry out installation and commissioning work for raw-sulfated juice, clear juice, exhaust steam and injection water inlet temperature , over hauling, rewiring and recommissioning of auto drum water level control system of boilers , rewiring and recommissioning of high or low alarm system on boilers for water level , overhauling, rewiring and recommissioning of boiler steam generation system , overhauling, rewiring and recommissioning of boiler feed water measurement system

CTN :45535164

03 Jul, 2026 NA

Dhanbad - Jharkhand

Tender For supply and installation of additional accessories, as per the list for existing benchtop fluorimeter. a) quantum yield measurement unit b) polarization accessories c) low temperature accessories

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

CTN :45498738

25 Jun, 2026 NA

Jaunpur - Uttar Pradesh

Tender For supply of temperature dependent hall measurement setup

State Government

CTN :45498716

01 Jul, 2026 16.63 Lacs

Delhi - Delhi

Tender For supply of set up to find the coefficient of thermal conductivity of a good conductor (copper) using searl's me , setup to find numerical aperture of an optical fibre , set up to use a prism shaped double refracting crystal to determine the refractive indices of the qu , set up to measure birefringence of mica , set up to determine the cofficient of viscosity using capilary flow method , sextant , set up to measure of planck s constant using black body radiation and photo-detector , set up to find the coefficient of thermal conductivity of copper (cu) by angstrom method , set up to calibrate a thermocouple to measure temperature in a specified range by direct method and/ , set up to study the variation of thermo e. m. f. of thermocouple with difference of temperature of its , setup to determine the temperature coefficient of resistance using platinum resistance thermometer ( , setup to determine the temperature coefficient of resistance by platinum resistance thermometer (prt , set up to determine coefficient of themal conductivity of a bad conductor by lee and charlton's disc , set up to study the pe hysteresis loop of a ferroelectric crystal probes arrangement , set up to measure the dielectric constant of a dielectric materials with frequency , set up for the measurement of field strength b and its variation in a solenoid (determine db/dx) , set up to study magnetic field variation along the axis of a circular coil and in a helmholtz coil

Temperature Measurement Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government